平车机和压车机的安装使用

通过简要介绍自制平车机和压车机在杏花矿装运系统的安装和使用,阐明了自制平车机和压车机的应用和效果。

酒钢1#翻车机靠车及压车机构优化设计研究

酒钢1#翻车机为转子式翻车机,主要用于翻卸焦煤、动力煤及外购块矿。它适合翻卸C64/C62等老式车皮,经过长期使用,该型号翻车机的靠车及压车机构在实际作业过程中存在着一定的问题。针对酒钢本部在用旧型翻车在使用出现的实际问题,确定了酒钢1#翻车机-靠车及压车机构优化设计研究。

New Method to Restrain Pumping Voltage of Braking Procedure for Brushless DC Motor of Electric Armored Vehicle

In order to restrain the high pumping voltage of braking procedure which is harmful to the system of electric armored vehicle. Based on the analysis of pumping voltage of the braking procedure, the relation between pumping voltage and PWM ratio is derived and a new digital control method to restrain the pumping voltage by changing PWM ratio is put forward. Because the capacitance is decreased effectively, the volume of controller is reduced and the performance to price ratio is improved. The results of computer simulation and experiment proved that this method is feasible and valid.

Dynamic performance of six-axle locomotive subjected to asymmetric brake shoe forces

To research the influence of asymmetric brake shoe forces(ABSF)induced by braking failure on the dynamic performance of six-axle locomotive,the static equilibrium model of three-axle bogie and dynamic model for locomotive are established.The coupling vibration equations of axle hung motor and wheelset are derived.For the air braking,the influence mechanism of ABSF on the wheel-rail asymmetric motion and force characteristics are discussed.It can be found that if the ABSF is applied in the front wheelset,all the wheelsets move laterally in the same direction.Once the ABSF occurs in the middle or rear one,other wheelsets may move laterally towards the opposite direction.The motion amplitude and direction of all wheelsets strictly depend on the resultant moment of suspension yawing moment and brake shoe asymmetric moment.For the asymmetric braking,the free lateral gap of axle-box could increase the wheelset motion amplitude,but could not change the moving direction.In both the straight line and curve,the ABSF may lead to wheelset misaligning motion,intensify the wheel-rail lateral dynamic interaction and deteriorate wheel-rail contact state.Especially for the steering wheelsets,the asymmetric braking increases the wheelset attack angle significantly,which forms the worst braking condition.

Research on Simulation and Test of the Nonlinear Responses for the Hydraulic Shock Absorber

Basically on the multi-body system dynamics,the virtual prototype of the hydraulic shock absorber for the bench test is developed in the ADAMS environment.Dynamic behaviors of the absorber are studied by both computer simulation and real test.Numerical predictions of dynamic responses are produced by the established virtual prototype of the absorber and compared with experimental results.It has been shown from the comparison that the vibration behaviors of the prototype with hysteretic damping characteristics are considered to be more identical with the bench test results than those of the same prototype with piecewise linear damping properties are.The current virtual prototype of the shock absorber is correct and can be a developing terrace for the optimizing design of the absorber and matching capability of the whole car.

Design and Optimization of Tandem Arranged Cascade in a Transonic Compressor

This study proposed a design and optimization strategy for a tandem arranged cascade using the Non-dominated Sorting Genetic Algorithm(NSGA) Ⅱ multi-objective optimization algorithm and Back Propagation(BP) neural network technology. The NASA Stage 35 was employed as the initial bench mark in the present study and five geometric control parameters were working as the optimization parameters aiming to enhance the aerodynamic performance in terms of total pressure rise and efficiency. Results showed that the feasibility and capability of the proposed optimization strategy was successfully examined. In view of the fact that the initial tandem cascade(directly scaling down from NASA Stage 35) cannot guarantee the aerodynamic performance, first optimization trial was conducted to optimize the initial design. Results showed that the optimum can improve the flow quality whereas the separation on the blade is decayed or even eliminated particularly at the tip and root regions. However, compared with the initial tandem design, the enhancement in total pressure ratio(0.47%) and efficiency(1%) are too small to be noticed. Second investigation was particularly emphasizing on a high turning tandem compressor with an increment by 28°. The pressure rise and efficiency were augmented by 1.44% and 2.34%(compared to the initial tandem design), respectively. An important conclusion can be drawn that the optimization strategy is worthy to be used in high turning compressors with a considerable performance improvement.

Study on Rotational Frequency Noise in a Centrifugal Compressor for Automobile Turbochargers

The rotational frequency noise(also known as the pulsation noise) due to the mistuning of impeller blade rows introduced at the manufacturing stage of the impellers is observed in the small-sized centrifugal compressor for automobile turbochargers. The present paper addresses the elucidation of the generating mechanism and parameter dependency such as the kind and degree of mistuning. In order to analyze numerically the rotational frequency noise due to mistuning, the unsteady computational fluid dynamics(CFD) of the whole compressor including volute is executed, and the resultant time history of the pressure is fed into the spectral analysis.