期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
基于PLC控制的插头E极芯针自动压机设计
1
作者 张涛川 李大成 段春梅 《机械工程与自动化》 2016年第6期184-186,共3页
针对插头接地极进行芯针组装工作设计了一款自动压机,采用了"分体制造+压力组装"的组装工艺。着重对四步循环工艺流程、机械结构设计、PLC选型和程序设计进行了阐述。经企业实际应用,该设备运行稳定、使用可靠,实现了生产过... 针对插头接地极进行芯针组装工作设计了一款自动压机,采用了"分体制造+压力组装"的组装工艺。着重对四步循环工艺流程、机械结构设计、PLC选型和程序设计进行了阐述。经企业实际应用,该设备运行稳定、使用可靠,实现了生产过程的自动化。 展开更多
关键词 PLC 压针机 械设计 极芯
下载PDF
基于PLC的组合仪表压针轴机控制系统 被引量:1
2
作者 高飞 汤志祥 《电气自动化》 北大核心 2006年第6期51-52,共2页
汽车仪表压针轴机,是将指针压制在汽车组合仪表盘上的设备。该文论述了基于PLC的汽车组合仪表压针轴机控制系统。相比使用传统继电器进行人工压针,采用计算机-PLC控制系统,仅一次压针过程,就可完成取针、移位、检测、信号加载、压针及... 汽车仪表压针轴机,是将指针压制在汽车组合仪表盘上的设备。该文论述了基于PLC的汽车组合仪表压针轴机控制系统。相比使用传统继电器进行人工压针,采用计算机-PLC控制系统,仅一次压针过程,就可完成取针、移位、检测、信号加载、压针及对相关生产信息的保存,为生产过程全程质量监控体系提供了有力保障。 展开更多
关键词 计算控制 PLC 汽车组合仪表
下载PDF
Effects of Airfoil-probe Tubes on the Flow Field of a Compressor Cascade 被引量:5
3
作者 MA Hongwei JIN Chao +1 位作者 ZHAO Lianpeng MA Rong 《Journal of Thermal Science》 SCIE EI CAS CSCD 2017年第4期321-330,共10页
To explore the effects of airfoil-probe tubes and its installment position on the flow field of the compressor cas- cade, and find out the mechanism that how the airfoil-probes affect the aerodynamic characteristics o... To explore the effects of airfoil-probe tubes and its installment position on the flow field of the compressor cas- cade, and find out the mechanism that how the airfoil-probes affect the aerodynamic characteristics of the com- pressor cascade, this paper performed both numerical and experimcntal works on the same compressor cascade. The experiment mainly focused on the cases of low Mach number (Ma = 0.1), and cases with different Mach numbers (0.1, 0.3, 0.7) and different incidence angles (-5, 0, 5) are investigated by the numerical method. The case without the airfoil-probe tube was referenced as the baseline, and other three cases with the airfoil-probe tubes installed in different chordwise positions O0%, 50%, 70% of the chord length) were studied. The diameter of the airfoil-probe tube is 3ram, which is configured as 300% amplification of some particular airfoil-probe ac- cording to the geometrical similarity principle. The results show that the airfoil-probe tubes have a negative in- fluenc~ on the flow capacity of the cascade at all investigation points. The separations and the large scale stream- wise vortices that induced by the airfoil-probe tube on the pressure side cause most the losses at the high Mach number. The influence of the airfoil-probe tube on the flow field in the vicinity of the pressure side surface is lo- cal separation at the low Mach number. The airfoil-probe tubes also have a clearly effect on the leakage flow. It decreases the mass flow of the leakage flow and weakens the intensity of the leakage vortex, but enlarges the in- fluence area. The total pressure loss of the case that the tube is installed at the half chordwise position is generally lower than other cases especially at the high Mach number, it can even decrease the losses compared with the ba- sic case. 展开更多
关键词 airfoil-probe compressor cascade installment position 5-hole probe
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部