In many circumstances,dissimilar metals have to be bonded together and the resulting joint interfaces must typically sustain mechanical and/or electrical forces without failure,which is not possible by fusion welding ...In many circumstances,dissimilar metals have to be bonded together and the resulting joint interfaces must typically sustain mechanical and/or electrical forces without failure,which is not possible by fusion welding processes.The melting points of magnesium(Mg)and copper(Cu)have a significant difference(nearly 400℃)and this may lead to a large difference in the microstructure and joint performance of Mg-Cu joints.However,diffusion bonding can be used to join these alloys without much difficulty.This work analyses the effect of parameters on diffusion layer thickness,hardness and strength of magnesium-copper dissimilar joints.The experiments were conducted using three-factor,five-level,central composite rotatable design matrix.Empirical relationships were developed to predict diffusion layer thickness,hardness and strength using response surface methodology.It is found that bonding temperature has predominant effect on bond characteristics.Joints fabricated at a bonding temperature of 450℃, bonding pressure of 12 MPa and bonding time of 30 min exhibited maximum shear strength and bonding strength of 66 and 81 MPa, respectively.展开更多
Ni-Fe/Cu/Co/Cu multilayered nanowire arrays were electrodeposited into anodic aluminum oxide template by using dual-bath method at room temperature. Scanning electron microscopy and transmission electron microscopy we...Ni-Fe/Cu/Co/Cu multilayered nanowire arrays were electrodeposited into anodic aluminum oxide template by using dual-bath method at room temperature. Scanning electron microscopy and transmission electron microscopy were used to characterize the morphology and structure of the multilayered nanowire arrays. Vibrating sample magnetometer and physical property measurement system were used to measure their magnetic and giant magnetoresistance （GMR） properties. The effect of sub-layer thickness on the magnetic and GMR properties was investigated. The results indicate that magnetic properties of electmdeposited nanowires are not affected obviously by Cu layer thickness, while magnetic layers （Ni-Fe and Co layers） have significant influence. In addition, GMR ratio presents an oscillatory behavior as Cu layer thickness changes. The magnetic and GMR properties of the multilayered nanowire arrays are optimum at room temperature for the material structure of Ni-Fe （25 nm）/Cu （15 nm）/Co （25 nm）/Cu （15 nm） with 30 deposition cycles.展开更多
基金support rendered through a Major Research Project No. F-31-51/2005(SR)
文摘In many circumstances,dissimilar metals have to be bonded together and the resulting joint interfaces must typically sustain mechanical and/or electrical forces without failure,which is not possible by fusion welding processes.The melting points of magnesium(Mg)and copper(Cu)have a significant difference(nearly 400℃)and this may lead to a large difference in the microstructure and joint performance of Mg-Cu joints.However,diffusion bonding can be used to join these alloys without much difficulty.This work analyses the effect of parameters on diffusion layer thickness,hardness and strength of magnesium-copper dissimilar joints.The experiments were conducted using three-factor,five-level,central composite rotatable design matrix.Empirical relationships were developed to predict diffusion layer thickness,hardness and strength using response surface methodology.It is found that bonding temperature has predominant effect on bond characteristics.Joints fabricated at a bonding temperature of 450℃, bonding pressure of 12 MPa and bonding time of 30 min exhibited maximum shear strength and bonding strength of 66 and 81 MPa, respectively.
基金Supported by the Natural Science Foundation of Tianjin,China(08JCZDJC17400)
文摘Ni-Fe/Cu/Co/Cu multilayered nanowire arrays were electrodeposited into anodic aluminum oxide template by using dual-bath method at room temperature. Scanning electron microscopy and transmission electron microscopy were used to characterize the morphology and structure of the multilayered nanowire arrays. Vibrating sample magnetometer and physical property measurement system were used to measure their magnetic and giant magnetoresistance （GMR） properties. The effect of sub-layer thickness on the magnetic and GMR properties was investigated. The results indicate that magnetic properties of electmdeposited nanowires are not affected obviously by Cu layer thickness, while magnetic layers （Ni-Fe and Co layers） have significant influence. In addition, GMR ratio presents an oscillatory behavior as Cu layer thickness changes. The magnetic and GMR properties of the multilayered nanowire arrays are optimum at room temperature for the material structure of Ni-Fe （25 nm）/Cu （15 nm）/Co （25 nm）/Cu （15 nm） with 30 deposition cycles.
