The gel polymer electrolyte containing N-propyl, methylpyrrolidinium bis（（trifiuoromethyl） sulfonyl）imide （PYR13TFSI） with better performance is prepared by radical polymerization method. The interface status be...The gel polymer electrolyte containing N-propyl, methylpyrrolidinium bis（（trifiuoromethyl） sulfonyl）imide （PYR13TFSI） with better performance is prepared by radical polymerization method. The interface status between the LiFePO4 electrode and the electrolyte is characterized by a scanning electron microscope and X-ray photoelectron spectroscopy （XPS）. There is a layer of membrane on the gel electrolyte and perfect shell membranes on the surface of active LiFePO4 cluster, on the other hand, N and S photoelectron signals are observed in XPS spectra after charge-discharge cycles. The results show that the ionic liquids and unpolymerized methyl methacrylate incorporate into the electrode surface and form the SEI membrane with Li ion and electrons while the gel electrolyte contacts with the electrode. The formation process of the SEI membrane needs at least three cycles, the discharge capacity increases as the SEI membrane becomes sufficiently thick, which blocks further electron transfer, and the system may approach steady state. The performance of cell with ionic liquid gel polymer electrolyte is measured at different rate. The cells retain 132 mAh/g at 0.2 C, 128 mAh/g at 0.5 C, and 120 mAh/g at 1.0 C after 30 cycles with charge-discharge efficiency of ca. 98% at every rate.展开更多
基金V. ACKNOWLEDGMENTS This work was supported by the Innovative Research Team of green chemical technology in University of Heilongjiang Province, the Natural Science Foundation of Heilongjiang Province of China （No.B201007 and No.E201141）, Harbin Innovation Talents of Science and Technology of Special Fund Project （No.2012RFQXG085）, and Educational Commission of Heilongjiang Province of China （No.12521z008 and No.12511443）.
文摘The gel polymer electrolyte containing N-propyl, methylpyrrolidinium bis（（trifiuoromethyl） sulfonyl）imide （PYR13TFSI） with better performance is prepared by radical polymerization method. The interface status between the LiFePO4 electrode and the electrolyte is characterized by a scanning electron microscope and X-ray photoelectron spectroscopy （XPS）. There is a layer of membrane on the gel electrolyte and perfect shell membranes on the surface of active LiFePO4 cluster, on the other hand, N and S photoelectron signals are observed in XPS spectra after charge-discharge cycles. The results show that the ionic liquids and unpolymerized methyl methacrylate incorporate into the electrode surface and form the SEI membrane with Li ion and electrons while the gel electrolyte contacts with the electrode. The formation process of the SEI membrane needs at least three cycles, the discharge capacity increases as the SEI membrane becomes sufficiently thick, which blocks further electron transfer, and the system may approach steady state. The performance of cell with ionic liquid gel polymer electrolyte is measured at different rate. The cells retain 132 mAh/g at 0.2 C, 128 mAh/g at 0.5 C, and 120 mAh/g at 1.0 C after 30 cycles with charge-discharge efficiency of ca. 98% at every rate.
