期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
福建推覆构造研究 被引量:24
1
作者 陶建华 陈福龙 《石油实验地质》 CAS CSCD 北大核心 2006年第3期259-263,285,共6页
通过地表与深部地球物理资料分析,论证了福建推覆构造的存在,并根据其不同表现形式,划分为东部逆冲推覆带、中部逆冲褶皱带和西部挤压推覆带。在区域构造分析的基础上认为:福建推覆构造发育于印支期,鼎盛发展于燕山早期,定位消减于燕山... 通过地表与深部地球物理资料分析,论证了福建推覆构造的存在,并根据其不同表现形式,划分为东部逆冲推覆带、中部逆冲褶皱带和西部挤压推覆带。在区域构造分析的基础上认为:福建推覆构造发育于印支期,鼎盛发展于燕山早期,定位消减于燕山晚期;推覆运动方向由北西往南东;推覆构造的形成与濒太平洋大陆边缘活动带剧烈运动有关。 展开更多
关键词 逆冲 外来 原地岩系 推覆构造 福建
下载PDF
四川彭县推覆构造的特征与形成 被引量:9
2
作者 刘肇昌 代真勇 《地球科学》 EI CAS 1986年第1期13-20,共8页
本文对前龙门山区彭县推覆构造进行了详细研究,在推覆体内部划分出若干不同的构造带,强烈压缩变形的白水河断裂带为其“根带”。它们主要是旱第三纪末的陆内俯冲挤压导致的褶皱-逆冲作用以及随后的重力滑动作用形成的。推覆体在滑移过... 本文对前龙门山区彭县推覆构造进行了详细研究,在推覆体内部划分出若干不同的构造带,强烈压缩变形的白水河断裂带为其“根带”。它们主要是旱第三纪末的陆内俯冲挤压导致的褶皱-逆冲作用以及随后的重力滑动作用形成的。推覆体在滑移过程中发生变形,并对原地岩系的构造进行改造。 展开更多
关键词 四川省 彭县推覆构造 推覆体内部构造带 根带 原地岩系 褶皱—逆冲作用 重力滑动
下载PDF
福建推覆构造研究与找矿突破 被引量:18
3
作者 陶建华 《福建地质》 2008年第2期105-124,共20页
阐述了福建推覆构造的研究成果,依据福建推覆构造的不同表现形式,划分为东部逆冲推覆构造带、中部逆冲褶皱推覆构造带、西部挤压推覆构造带。讨论了其构造特征形式,将推覆(滑脱)构造形式划分为二类五型及其控岩控矿的地质特征。总结了... 阐述了福建推覆构造的研究成果,依据福建推覆构造的不同表现形式,划分为东部逆冲推覆构造带、中部逆冲褶皱推覆构造带、西部挤压推覆构造带。讨论了其构造特征形式,将推覆(滑脱)构造形式划分为二类五型及其控岩控矿的地质特征。总结了运用推覆构造研究成果在寻找隐伏煤矿及铁多金属矿的成功实例,提出了推覆构造理论对深部找矿指导作用和找矿方向。 展开更多
关键词 推覆构造 外来 原地岩系 找矿突破 福建
下载PDF
Primary dolostone related to the Cretaceous lacustrine hydrothermal sedimentation in Qingxi sag, Jiuquan Basin on the northern Tibetan Plateau 被引量:11
4
作者 WEN HuaGuo ZHENG RongCai +3 位作者 QING HaiRuo FAN MingTao LI YanAn GONG BoShi 《Science China Earth Sciences》 SCIE EI CAS 2013年第12期2080-2093,共14页
Based on comprehensive studies in petrography, petrofabric analysis and geochemistry, this paper describes a unique and rare laminated micritic ferruginous primary dolostone crystallized and precipitated from the alka... Based on comprehensive studies in petrography, petrofabric analysis and geochemistry, this paper describes a unique and rare laminated micritic ferruginous primary dolostone crystallized and precipitated from the alkaline hot brine under the conditions of the Mesozoic faulted lake basin. The main rock-forming mineral of this dolostone is ferruginous dolomite with a micritic structure. This dolomite mostly exhibits laminae of 0.1-1 mm thick and is often discovered with other minerals, such as albite, analcite, barite and dickite, which have at least two types of interbedded laminae. Petrogeochemistry reveals that this dolostone contains a large number of typomorphic elements of hydrothermal sedimentation, including Sb, Ba, Sr, Mn, and V. In addition, the LREE is in relatively high concentrations and possesses the typical REE distribution pattern with negative Eu anomaly. Oxygen isotope values (C^ISOpDB) range from 5.89%~ to 14.15%o with an average of 9.69%0. The ratio of 87Sr/86Sr is between 0.711648 and 0.719546, with an average of 0.714718. These data indicate that the depositional environment is a stable, blocked, anoxic low-lying hot brine pool in the bottom of deep lake controlled by basement faults. The hydrothermal fluid is the alkaline hot brine formed by the combination of the infiltration lake water and mantle-derived magmatic water, consisting of many ions, including Ca2+, Mg2+ and Fe2+. Under the driving flow power of magmatic heat, gravity and compaction, the hy- drothermal fluid overcame the overburden pressure and hydrostatic pressure of the lake water body, and boiled to explosion, and then the explosion shattered the original laminated micritic ferruginous primary dolostone near the vent and then formed a new type of dolostone called shattered "hydroexplosion breccias". In the low-lying, unperturbed hot brine pool, far from the vent, the laminated micritic ferruginous primary dolostone was quickly crystallized and chemicals precipitated from the hy- drotherm. This study of special rocks contributes to research into the causes of the formation of lacustrine carbonate rocks and dolostone. In particular, it provides new examples and research insights for future studies of the lacustrine dolomite from the similar Mesozoic and Cenozoic basins in China. 展开更多
关键词 primary ferruginous dolostone hydrothermal sedimentation fault lakes CRETACEOUS Jiuquan Basin
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部