为了研究植物乳杆菌材料对黄曲霉毒素去除新方法,为黄曲霉毒素B_(1)的高效生物去除提供了新思路。本文采用基于聚多巴胺的原子转移自由基聚合方法(Polydopamine-based Atom Transfer Radical Polymerization,p-ATRP)和细胞自催化的无铜...为了研究植物乳杆菌材料对黄曲霉毒素去除新方法,为黄曲霉毒素B_(1)的高效生物去除提供了新思路。本文采用基于聚多巴胺的原子转移自由基聚合方法(Polydopamine-based Atom Transfer Radical Polymerization,p-ATRP)和细胞自催化的无铜添加原子转移自由基聚合方法(Cell-catalyzed Copper-free Atom Transfer Radical Polymerization,c-ATRP)对植物乳杆菌活细胞表面进行修饰,引导原子转移自由基聚合(Atom Transfer Radical Polymerization,ATRP)体系自组装聚合反应形成聚合物材料,对修饰后的植物乳杆菌进行表征,并比较修饰前后植物乳杆菌对黄曲霉毒素B_(1)吸附脱附能力。结果表明,未修饰的植物乳杆菌,细胞表面圆润光滑,经过p-ATRP修饰后的植物乳杆菌,细胞表面变得极为粗糙,经过c-ATRP修饰后的植物乳杆菌,细胞表面出现褶皱;未修饰的植物乳杆菌的Zeta点位为-8.43 mV,经过Dopamine和PNIPAAm修饰后的植物乳杆菌点位分别为1.791和13.767 mV;植物乳杆菌在0.1~100μg/mL黄曲霉毒素B_(1)吸附率为75.3%,p-ATRP和c-ATRP修饰的植物乳杆菌比未修饰的植物乳杆菌吸附能力分别提高了7.8%和6.4%。在相同黄曲霉毒素B_(1)浓度下,植物乳杆菌脱附率为6.1%,p-ATRP和c-ATRP修饰的植物乳杆菌脱附能力分别提高了14.4%和42%。经过修饰后的植物乳杆菌显著提升了植物乳杆菌对黄曲霉毒素的吸附和脱附能力。展开更多
Hollow silica nanospheres were synthesized by silyl functionalized poly(vinyl benzyl chloride)(PVBC) latex nanoparticles via surface-initiated atom transfer radical polymerization(ATRP) of 3-(trimethoxysilyl)propyl me...Hollow silica nanospheres were synthesized by silyl functionalized poly(vinyl benzyl chloride)(PVBC) latex nanoparticles via surface-initiated atom transfer radical polymerization(ATRP) of 3-(trimethoxysilyl)propyl methacrylate(TMSPM),followed by polycondensation with tetraethoxysi-lane(TEOS) in the ethanol-ammonia and removal of the PVBC cores by thermal decomposition.Transmission electron microscopy(TEM) were used to characterize the intermediate products and the hollow nanospheres.展开更多
由于纤维素具有热稳定性差、化学稳定性差、易吸水、易受菌虫和微生物侵害等缺点,有必要对其进行化学改性处理。本文简述了原子转移自由基聚合(atom transfer radical polymerization,ATRP)方法在纤维素表面改性方面的应用情况及最新研...由于纤维素具有热稳定性差、化学稳定性差、易吸水、易受菌虫和微生物侵害等缺点,有必要对其进行化学改性处理。本文简述了原子转移自由基聚合(atom transfer radical polymerization,ATRP)方法在纤维素表面改性方面的应用情况及最新研究进展。综述了利用ATRP方法对纤维素表面进行改性的方法,利用ATRP方法在纤维素表面接枝不同功能性单体,赋予纤维素表面疏水性、抗菌性和刺激-响应性等多种功能性的研究概况及利用ATRP方法对天然纤维表面进行表面疏水、抗菌等功能改性以及在改善复合材料中纤维与基体间界面相容性方面的应用。最后,还介绍了ARGET ATRP(activators regenerated by electron transfer ATRP)方法由于具有大量减少铜用量,允许少量空气存在而且改性后纤维素易清洗等优点,有利于在纤维素改性工业中的推广应用。展开更多
The homopolymer brushes of polyacrylamide(PAAM) on spherical silicon gel were synthesized by atom transfer radical polymerization(ATRP). The silicon gel initiator was prepared by self-assemble. Utilizing these modifie...The homopolymer brushes of polyacrylamide(PAAM) on spherical silicon gel were synthesized by atom transfer radical polymerization(ATRP). The silicon gel initiator was prepared by self-assemble. Utilizing these modified silicon gel as the substrate, a kind of novel inorganic-organic hybrid material with the polymer metal complex was synthesized. The result of ESR indicates that the inorganic/organic hybrid material with the polymer metal complex based on silicon gel possesses well paramagnetis.展开更多
“Living" radical polymerization of methyl methacrylate was investigated using a new reaction system,ethyl 2-bromoisobutyrate/CuBr/[mim][HCOO]/MMA,in which [mim][HCOO] ionic liquid was a good solvent to CuBr.Poly...“Living" radical polymerization of methyl methacrylate was investigated using a new reaction system,ethyl 2-bromoisobutyrate/CuBr/[mim][HCOO]/MMA,in which [mim][HCOO] ionic liquid was a good solvent to CuBr.Polymerization of methyl methacrylate was carried out in [mim][HCOO] in the absence of any organic ligands.The polymerization mechanism belongs to an ATRP process.The polymerization was closely controlled and was a fast reaction when compared to polymerization in non-polar solvents in [mim][HCOO] at 50℃.The polymers were easily separated from the catalyst.Analysis of the PMMA for residual copper by atomic absorption spectrophotometer,shows a copper content of 3.80×10 -3 %(1% is expected, if no copper is removed).展开更多
文摘为了研究植物乳杆菌材料对黄曲霉毒素去除新方法,为黄曲霉毒素B_(1)的高效生物去除提供了新思路。本文采用基于聚多巴胺的原子转移自由基聚合方法(Polydopamine-based Atom Transfer Radical Polymerization,p-ATRP)和细胞自催化的无铜添加原子转移自由基聚合方法(Cell-catalyzed Copper-free Atom Transfer Radical Polymerization,c-ATRP)对植物乳杆菌活细胞表面进行修饰,引导原子转移自由基聚合(Atom Transfer Radical Polymerization,ATRP)体系自组装聚合反应形成聚合物材料,对修饰后的植物乳杆菌进行表征,并比较修饰前后植物乳杆菌对黄曲霉毒素B_(1)吸附脱附能力。结果表明,未修饰的植物乳杆菌,细胞表面圆润光滑,经过p-ATRP修饰后的植物乳杆菌,细胞表面变得极为粗糙,经过c-ATRP修饰后的植物乳杆菌,细胞表面出现褶皱;未修饰的植物乳杆菌的Zeta点位为-8.43 mV,经过Dopamine和PNIPAAm修饰后的植物乳杆菌点位分别为1.791和13.767 mV;植物乳杆菌在0.1~100μg/mL黄曲霉毒素B_(1)吸附率为75.3%,p-ATRP和c-ATRP修饰的植物乳杆菌比未修饰的植物乳杆菌吸附能力分别提高了7.8%和6.4%。在相同黄曲霉毒素B_(1)浓度下,植物乳杆菌脱附率为6.1%,p-ATRP和c-ATRP修饰的植物乳杆菌脱附能力分别提高了14.4%和42%。经过修饰后的植物乳杆菌显著提升了植物乳杆菌对黄曲霉毒素的吸附和脱附能力。
文摘Hollow silica nanospheres were synthesized by silyl functionalized poly(vinyl benzyl chloride)(PVBC) latex nanoparticles via surface-initiated atom transfer radical polymerization(ATRP) of 3-(trimethoxysilyl)propyl methacrylate(TMSPM),followed by polycondensation with tetraethoxysi-lane(TEOS) in the ethanol-ammonia and removal of the PVBC cores by thermal decomposition.Transmission electron microscopy(TEM) were used to characterize the intermediate products and the hollow nanospheres.
文摘由于纤维素具有热稳定性差、化学稳定性差、易吸水、易受菌虫和微生物侵害等缺点,有必要对其进行化学改性处理。本文简述了原子转移自由基聚合(atom transfer radical polymerization,ATRP)方法在纤维素表面改性方面的应用情况及最新研究进展。综述了利用ATRP方法对纤维素表面进行改性的方法,利用ATRP方法在纤维素表面接枝不同功能性单体,赋予纤维素表面疏水性、抗菌性和刺激-响应性等多种功能性的研究概况及利用ATRP方法对天然纤维表面进行表面疏水、抗菌等功能改性以及在改善复合材料中纤维与基体间界面相容性方面的应用。最后,还介绍了ARGET ATRP(activators regenerated by electron transfer ATRP)方法由于具有大量减少铜用量,允许少量空气存在而且改性后纤维素易清洗等优点,有利于在纤维素改性工业中的推广应用。
文摘The homopolymer brushes of polyacrylamide(PAAM) on spherical silicon gel were synthesized by atom transfer radical polymerization(ATRP). The silicon gel initiator was prepared by self-assemble. Utilizing these modified silicon gel as the substrate, a kind of novel inorganic-organic hybrid material with the polymer metal complex was synthesized. The result of ESR indicates that the inorganic/organic hybrid material with the polymer metal complex based on silicon gel possesses well paramagnetis.
文摘“Living" radical polymerization of methyl methacrylate was investigated using a new reaction system,ethyl 2-bromoisobutyrate/CuBr/[mim][HCOO]/MMA,in which [mim][HCOO] ionic liquid was a good solvent to CuBr.Polymerization of methyl methacrylate was carried out in [mim][HCOO] in the absence of any organic ligands.The polymerization mechanism belongs to an ATRP process.The polymerization was closely controlled and was a fast reaction when compared to polymerization in non-polar solvents in [mim][HCOO] at 50℃.The polymers were easily separated from the catalyst.Analysis of the PMMA for residual copper by atomic absorption spectrophotometer,shows a copper content of 3.80×10 -3 %(1% is expected, if no copper is removed).
