原孔位多次应力解除地应力测试方法与实践

针对影响深部煤矿巷道围岩稳定的地应力因素,基于深埋巷道围岩体应力分布的力学特征和地应力钻孔解除法原理,探讨了在同一钻孔内间隔一定距离进行反复多次解除的地应力测试方法,建立了判别原始应力的科学依据,根据基准孔和校验孔的测量结果,可以推算出其他测点原岩应力区与巷道半径之间的关系。工程实践表明:在千米埋深的大屯矿区孔庄煤矿井底车场区域,基准孔在3.7R处进入了原岩应力区,实测垂直原岩应力值为23.3 MPa,并在校验孔和推广孔得到了验证。

Identification of Plasma Membrane Aquaporin in Guard Cells of Vicia faba and Its Role in Stomatal Movement

Water channels or aquaporins are the main pathways of water transport. Both the existence and function of aquaporins in die guard cells of Vicia faba L. were investigated both by using RD28 cDNA and RD28 antibody as probes, and by controlling stomatal movement as a parameter combined with antibody and inhibitor of aquaporins respectively. The results revealed that RD28 mRNA, encoding a plasma membrane aquaporin, expressed in ale mesophyll cells and vascular tissues of V. faba, especially in guard cells. And the location of RD28-like proteins was mainly on plasma membrane of guard cells. The addition of 25 mumol/L HgCl2, an aquaporin blocker, and antibody of RD28 as well, greatly suppressed the stomatal opening or guardcell protoplast swelling induced by fusicoccin and light, and closing induced by abscisic acid. However, 5 mmol/L, beta-mercaptoethanol, a reverse reagent of aquaporin blocker, reversed the inhibitory effect of HgCl2 Pretreatment oil stomatal opening ( i.e., HgCl2 was removed after HgCl2 pretreatment for 10 min). The results suggest that the aquaporins in V. faba are associated with stomatal movement.

Interpenetrating polymers supported on microporous polypropylene membranes for the transport of chromium ions

Modifying polypropylene membranes with interpenetrating polymer networks(IPNs) through the incorporation of poly(glycidyl methacrylate-N-methyl-D-glucamine)(P(GMA-NMG)) was performed by in situ synthesis via radical polymerization. The surface of the polypropylene membrane was activated by hydrophilic grafted polyelectrolyte, and then, pressure injection was used for the impregnation of the reactive solution in the membrane.Two types of pore-filled membranes were synthesized, chelating interpenetrating homopolymer networks of P(GMA-NMG), and chelating-ion exchange interpenetrating polymer networks(e.g., P(GMA-NMG)/P(AA),P(GMA-NMG)/P(AMPSA), and P(GMA-NMG)/P(Cl VBTA)). After their synthesis, the modified polypropylene membranes were characterized using techniques such as the electrokinetic potential, SEM, FT-IR, and Donnan dialysis to corroborate the chromium ion transport. The P(GMA-NMG) and complex network membranes exhibited a hydrophilic character with a water-uptake capacity between 20% and 35% and a percentage of modification between 4.0% and 7.0% in comparison with the behavior of the unmodified polypropylene membrane.Hexavalent chromium ions were efficiently transported from the food chamber at p H 9.0 when the 65.2%MTA1 P(Cl VBTA) homopolymer IPN membrane and 48.5% MTAG P(GMA-NMG)/P(Cl VBTA) IPN membrane were used. Similarly, hexavalent chromium ions were removed from the food chamber at pH 3.0 when MTAG(63.30%) and MTA1(35.68%) were used in 1 mol·L^(-1)Na Cl solution as the extraction reagent.

In-situ synthesized mesoporous TiO_2-B/anatase microparticles:Improved anodes for lithium ion batteries

Mesoporous TiO_2-B/anatase microparticles have been in-situ synthesized from K_2Ti_2O_5 without template.The TiO_2-B phase around the particle surface accelerates the diffusion of charges through the interface,while the anatase phase in the core maintains the capacity stability.The heterojunction interface between the main polymorph of anatase and the trace of TiO_2-B exhibits promising lithium ion battery performance.This trace of 5%(by mass) TiO_2-B determined by Raman spectra brings the first discharge capacity of this material to 247 mA · h ·g^(-1),giving 20%improvement compared to the anatase counterpart Stability testing at 1 C reveals that the capacity maintains at 171 mA·h·^(-1),which is better than 162 mA·h·g^(-1) for single phase anatase or 159 mA·h·g^(-1) for TiO_2-B.The mesoporous TiO_2-B/anatase rnicroparticles also show superior rate performance with 100 mA·h·g^(-1) at 40 C,increased by nearly 25%as compared to pure anatase.This opens a possibility of a general design route,which can be applied to other metal oxide electrode materials for rechargeable batteries and supercapacitors.

Influences of rainfall infiltration on stability of accumulation slope by in-situ monitoring test

In order to improve the understanding of the fundamental mechanism of rainfall infiltration induced landslides in accumulation slope and to clarify some important characteristics of slope performance,artificial rainfall simulation tests and field synthetic monitoring were carried out on a typical accumulation slope of Shangrui Freeway in Guizhou Province,China.The monitoring results show that the most accumulation landslides caused by rainfall infiltration are shallow relaxation failure,whose deformation zone lies within the top 0-4 m soil layer.The deformation of slope gradually reduces from the surface,where the greatest deformation lies in,to the deep part of slope.The average percentage of infiltration during the first 2 h is 86%,and then it reduces gradually with time because of the increase of the surface runoff.The average percentage of infiltration drop to a relatively stable value(50%)after 6 h.Rainfall infiltration causes obvious increase of pore-water pressure,which may result in a reduction of shear strength due to a decrease in effective stress and wetting-induced softening.The double-effect of rainfall infiltration is the main reason of rainfall infiltration induced landslides in accumulation slope.

Multifunctional electrospinning composite fibers for orthotopic cancer treatment in vivo

A multifunctional, dual-drug carrier platform was successfully constructed. Core-sheU structured NaGdF4：Yb/Er@NaGdF4：Yb@mSiO2-polyethylene glycol （abbreviated as UCNPS） nanopartides loaded with the antiturnor drug, doxorubicin （DOX） were incorporated into poly（^-caprolactone） （PCL） and gelatin loaded with antiphlogistic drug, indomethacin （MC） to form nanofibrous fabrics （labeled as MC/UCNPS/DOX） via electrospinning process. The resultant multifunctional spinning pieces can be surgically implanted directly at the tumor site of mice as an orthotopic chemotherapy by controlled-release DOX from mesoporous silicon dioxide （SiO2） and upconversion fluorescence/magnetic resonance dual-model imaging through NaGdF4：Yb/Er@NaGdF4：Yb embedded in MCfldCNPS/DOX invivo.

Distinct sedimentary environments and their influences on carbonate reservoir evolution of the Lianglitag Formation in the Tarim Basin,Northwest China

The Upper Ordovician Lianglitag Formation carbonate rocks are important oil and gas reservoirs in the Tarim Basin, Northwest China, with obviously distinct reservoir properties among different oilfields. As a case area of the above carbonate reser- voirs correlation, Tahe and Tazhong oilfields are chosen for the study through an integrated analysis of biostratigraphic isoch- ronous framework, cores, thin sections, logs, and strontium isotopes. The research shows that the two areas were respectively attributed to different carbonate platforms during the Lianglitag Formation depositional phase. For the Lianglitag Formation, five fourth-order sequences may be divided in Tazhong, whereas only four fourth-order sequences are preserved in Tahe that correspond to the lower ones observed in Tazhong. The Lianglitag Formation carbonate platform in Tahe was characterized by ramp and/or weak rimmed types, with low depositional rates （37 ktm/a）, higher whole-rock clastic contents, and higher 878r/86Sr isotope ratios of carbonate matrix, showing relatively deep-water environment and evident terrigenous input for car- bonate deposition. However, a strongly rimmed carbonate platform was developed in Tazhong, with high depositional rates of 250 p.m/a and less whole-rock clastic contents, indicating a high-energy depositional environment. Because of the sedimentary environment differences mentioned above, less high-energy facies but relatively intense syndepositional （early diagenetic） sea-water cementation of carbonates were developed in Tahe, and ubiquitous high-energy reef and shoal facies, with a frequent exposure to subaerial, and weak syndepositional sea-water cementation of carbonates in Tazhong. Therefore, fewer primary pores occurred in the Lianglitag Formation carbonate rocks of Tahe, whereas more primary pores were preserved in the same lithostratigraphic unit of the Tazhong （No. 1 fault zone）. Available high-energy reef-shoal facies and early diagenesis, with more primary pores preserved, provided a key material basis for the Lianglitag Formation carbonate reservoirs that largely oc- curred in Tazhong.