To prepare a solid dispersion of cisapride with hydroxypropylmethyl cellulose(HPMC E5 LV) as carrier for the purpose of accelerating the in vitro drug release by means ofimproving the solubility of the model drug. Met...To prepare a solid dispersion of cisapride with hydroxypropylmethyl cellulose(HPMC E5 LV) as carrier for the purpose of accelerating the in vitro drug release by means ofimproving the solubility of the model drug. Methods Alcohol and simulated gastric fluid (SGF) wereused to dissolve cisapride and HPMC in order to make the model drug dispersed homogeneously in thecarrier. The HPMC-cisapride solid dispersion was then obtained by conventional solvent evaporationmethod. Powder X-ray diffraction (XRD) was used to measure the diffraction peaks of pure carrier,pure cisapride, physical mixture of HPMC with cisapride (4:1), and HPMC-cisapride solid dispersion(4:1) to confirm the crystal existence. The solubility of pure drug and HPMC-cisapride soliddispersion was measured with water, SGF and simulated intestinal fluid (SIF) . The in vitro drugreleases of the sustained release tablet prepared with pure cisapride or HPMC-cisapride soliddispersion were investigated with water and SGF as media, respectively. Results No diffraction peakswere found by X-ray diffraction in the HPMC-cisapride solid dispersion (4:1), indicating that thedrug existed in an amorphous form at that drug-carrier ratio. Compared with the pure drug, thesolubilities of HPMC-cisapride solid dispersion are increased by 239.4% in SGF, 132.6% in water, and117.9% in SIF. According to the in vitro drug release, the sustained release tablet prepared withHPMC-cisapride solid dispersion had a faster drug release than did that prepared with pure drug. Thein vitro drug release profiles were found to comply with Higuchi's rule. Conclusion The in vitrodrug release of the sustained release tablet made by HPMC-cisapride solid dispersion is improvedowing to the increased drug solubility.展开更多
Demulsification of emulsified water-in-oil droplets was worked out with the employment of wetting coalescence materials. Demulsification is carried out in conventional stirred-column and packed-column. Among the four ...Demulsification of emulsified water-in-oil droplets was worked out with the employment of wetting coalescence materials. Demulsification is carried out in conventional stirred-column and packed-column. Among the four kinds of natural fibers and two kinds of inorganic materials tested, natural fiber A, originated from wood shavings was found to give the best performance of demulsification. The demulsification efficiency can exceed 96.5% when demulsification conditions are optimized. The packed-column showed much better performance both in terms of demulsification efficiency and repeated use of the recovered oil phase for extracting cadmium in simulated wastewater. Operating variables governing the demulsification efficiency were investigated.展开更多
Acrylonitrile-methyl methacrylate （AN-MMA） copolymer/silica nanocomposites were synthesized by in-situ emulsion polymerization initiated by 2,2＇-azobis（2-amidinopropane） dihydrochloride absorbed onto colloidal si...Acrylonitrile-methyl methacrylate （AN-MMA） copolymer/silica nanocomposites were synthesized by in-situ emulsion polymerization initiated by 2,2＇-azobis（2-amidinopropane） dihydrochloride absorbed onto colloidal silica particles, and the mesoporous carbon materials were prepared through carbonization of the obtained AN-MMA copolymer/silica nanocomposites, followed by HF etching. Thermogravimetric analysis of AN-MMAcopolymer/silica nanocomposltes snoweO mat me caroon ylelCl or copolymer was slgnuy oecreaseo as Silica parucle incorporated. N2 adsorption-desorption, scan electron microscopy （SEM） and transmission electron microscopy （TEM） were used to characterize the structure and morphology of the mesoporous carbon materials. Both SEM and展开更多
The liquid bulk technology can be divided into four parts： raw material refining, polymerization, flashed to live, granulation and packaging. There is an intrinsic link between them. This passage mainly makes some ex...The liquid bulk technology can be divided into four parts： raw material refining, polymerization, flashed to live, granulation and packaging. There is an intrinsic link between them. This passage mainly makes some experimental results to show that the process of raw material refining and polymerization.展开更多
This work reports the preparation of bulk and KIT-6-diluted W-Nb-O mixed oxide bronzes by a reflux method. The influence of the incorporation of Nb and a mesoporous silica on the physicochemical features of the cataly...This work reports the preparation of bulk and KIT-6-diluted W-Nb-O mixed oxide bronzes by a reflux method. The influence of the incorporation of Nb and a mesoporous silica on the physicochemical features of the catalysts is studied. The addition of Nb favors the formation of single-phase oxide bronze structure, with improved Lewis acidity;while the incorporation of KIT-6 gives rise to well-dispersed mixed metal oxide particles on the diluter. These diluted W-Nb-O catalysts present enhanced surface areas and mesopore volumes. The materials have been tested in the valorization of an aqueous model mixture (acetol/propanal/ethanol/acetic acid/water weight ratio of 5/25/10/30/30), through C-C bond formation reactions. The increase in the Lewis nature of surface acid sites stands as the key point to maximize the total organic yield during the reaction (C5-C10 products). The best catalysts maintain their catalytic behavior after five consecutive uses.展开更多
Biomass in the form of nutshell, hay of catkin, wheat straw and linseed residue in particles have been pyrolyzed in laboratory scale fixed bed reactor which yielded liquid oil, solid char and gas. The variation of oil...Biomass in the form of nutshell, hay of catkin, wheat straw and linseed residue in particles have been pyrolyzed in laboratory scale fixed bed reactor which yielded liquid oil, solid char and gas. The variation of oil yield for different biomass feedstock with reactor bed temperature and feed size is presented in this paper. A maximum liquid yield of 55 wt% of dry feedstock is obtained at an optimum temperature of 500℃ for a feed size of 300-600μm with a running time of 55 min for nutshell as the feedstock while the minimum liquid oil yield is found to be 30 wt% of feedstock at an optimum temperature of 400℃ for a feed size of 2.36 mm with a running time of 65 min for linseed residue as the feedstock. A comparison on the product yields is highlighted in this study. The pyrolysis liquid products are characterized and compared for some of the fuel properties like HHV （higher heating value）, viscosity, density and specific gravity.展开更多
Designing high active,low cost and bifunctional electrocatalysts is urgent for developing clean energy storage and conversion systems.Transition metal selenides exhibit optimal electronic conductivity and tunable phys...Designing high active,low cost and bifunctional electrocatalysts is urgent for developing clean energy storage and conversion systems.Transition metal selenides exhibit optimal electronic conductivity and tunable physicochemical properties,which endow them with potential for efficient electrocatalysts to facilitate the oxygen reduction and oxygen evolution reactions(ORR and OER).Herein,hollow NixCo0.85-xSe nanospheres were synthesized using a facile polyol based solution chemical method.The NixCo0.85-xSe exhibits an onset overpotential of 0.89 V for ORR,and an overpotential of 305 mV to achieve 10 mA cm^-2 for OER.Moreover,the NixCo0.85-xSe based Zn-air battery displays remarkable specific capacity and durability.Such superior catalytic performances can be attributed to the synergistic effect,large specific surface area and enhanced electron transfer rate.This approach provides a new way to design highly efficient bifunctional electrocatalysts for electrochemical energy storage and utilization.展开更多
Two-dimensional(2 D) transition metal phosphides(TMPs) are predicted with many novel properties and various applications. As a member of TMPs family, molybdenum phosphide(MoP) exhibits many exotic physicochemical prop...Two-dimensional(2 D) transition metal phosphides(TMPs) are predicted with many novel properties and various applications. As a member of TMPs family, molybdenum phosphide(MoP) exhibits many exotic physicochemical properties. However, the synthesis of high-quality2 D MoP single crystals is not reported due to the lack of reliable fabrication method, which limits the exploration of 2 D MoP. Here, we report the growth of high-quality ultrathin MoP single crystals with thickness down to 10 nm on liquid metals via chemical vapor deposition(CVD). The smooth surface of liquid Ga is regarded as a suitable growth substrate for producing 2 D MoP single crystals. The Mo source diffuses toward the Ga surface due to the high surface energy to react with phosphorus source, thus to fabricate ultrathin MoP single crystals. Then, we study the second harmonic generation(SHG) of 2 D MoP for the first time due to its intrinsic noncentrosymmetric structure. Our study provides an new approach to synthesize and explore other 2 D TMPs for future applications.展开更多
文摘To prepare a solid dispersion of cisapride with hydroxypropylmethyl cellulose(HPMC E5 LV) as carrier for the purpose of accelerating the in vitro drug release by means ofimproving the solubility of the model drug. Methods Alcohol and simulated gastric fluid (SGF) wereused to dissolve cisapride and HPMC in order to make the model drug dispersed homogeneously in thecarrier. The HPMC-cisapride solid dispersion was then obtained by conventional solvent evaporationmethod. Powder X-ray diffraction (XRD) was used to measure the diffraction peaks of pure carrier,pure cisapride, physical mixture of HPMC with cisapride (4:1), and HPMC-cisapride solid dispersion(4:1) to confirm the crystal existence. The solubility of pure drug and HPMC-cisapride soliddispersion was measured with water, SGF and simulated intestinal fluid (SIF) . The in vitro drugreleases of the sustained release tablet prepared with pure cisapride or HPMC-cisapride soliddispersion were investigated with water and SGF as media, respectively. Results No diffraction peakswere found by X-ray diffraction in the HPMC-cisapride solid dispersion (4:1), indicating that thedrug existed in an amorphous form at that drug-carrier ratio. Compared with the pure drug, thesolubilities of HPMC-cisapride solid dispersion are increased by 239.4% in SGF, 132.6% in water, and117.9% in SIF. According to the in vitro drug release, the sustained release tablet prepared withHPMC-cisapride solid dispersion had a faster drug release than did that prepared with pure drug. Thein vitro drug release profiles were found to comply with Higuchi's rule. Conclusion The in vitrodrug release of the sustained release tablet made by HPMC-cisapride solid dispersion is improvedowing to the increased drug solubility.
文摘Demulsification of emulsified water-in-oil droplets was worked out with the employment of wetting coalescence materials. Demulsification is carried out in conventional stirred-column and packed-column. Among the four kinds of natural fibers and two kinds of inorganic materials tested, natural fiber A, originated from wood shavings was found to give the best performance of demulsification. The demulsification efficiency can exceed 96.5% when demulsification conditions are optimized. The packed-column showed much better performance both in terms of demulsification efficiency and repeated use of the recovered oil phase for extracting cadmium in simulated wastewater. Operating variables governing the demulsification efficiency were investigated.
基金Supported by the Program for New Century Excellent Talents in University (NCET-07-0738)
文摘Acrylonitrile-methyl methacrylate （AN-MMA） copolymer/silica nanocomposites were synthesized by in-situ emulsion polymerization initiated by 2,2＇-azobis（2-amidinopropane） dihydrochloride absorbed onto colloidal silica particles, and the mesoporous carbon materials were prepared through carbonization of the obtained AN-MMA copolymer/silica nanocomposites, followed by HF etching. Thermogravimetric analysis of AN-MMAcopolymer/silica nanocomposltes snoweO mat me caroon ylelCl or copolymer was slgnuy oecreaseo as Silica parucle incorporated. N2 adsorption-desorption, scan electron microscopy （SEM） and transmission electron microscopy （TEM） were used to characterize the structure and morphology of the mesoporous carbon materials. Both SEM and
文摘The liquid bulk technology can be divided into four parts： raw material refining, polymerization, flashed to live, granulation and packaging. There is an intrinsic link between them. This passage mainly makes some experimental results to show that the process of raw material refining and polymerization.
基金Financial support by the Spanish Government(RTI2018-099668-B-C21,PGC2018-097277-B-100,and SEV-2016-0683)the Severo Ochoa Excellence Program(SVP-2014-068669)the “La Caixa-Severo Ochoa” Foundation,respectively,for their fellowships~~
文摘This work reports the preparation of bulk and KIT-6-diluted W-Nb-O mixed oxide bronzes by a reflux method. The influence of the incorporation of Nb and a mesoporous silica on the physicochemical features of the catalysts is studied. The addition of Nb favors the formation of single-phase oxide bronze structure, with improved Lewis acidity;while the incorporation of KIT-6 gives rise to well-dispersed mixed metal oxide particles on the diluter. These diluted W-Nb-O catalysts present enhanced surface areas and mesopore volumes. The materials have been tested in the valorization of an aqueous model mixture (acetol/propanal/ethanol/acetic acid/water weight ratio of 5/25/10/30/30), through C-C bond formation reactions. The increase in the Lewis nature of surface acid sites stands as the key point to maximize the total organic yield during the reaction (C5-C10 products). The best catalysts maintain their catalytic behavior after five consecutive uses.
文摘Biomass in the form of nutshell, hay of catkin, wheat straw and linseed residue in particles have been pyrolyzed in laboratory scale fixed bed reactor which yielded liquid oil, solid char and gas. The variation of oil yield for different biomass feedstock with reactor bed temperature and feed size is presented in this paper. A maximum liquid yield of 55 wt% of dry feedstock is obtained at an optimum temperature of 500℃ for a feed size of 300-600μm with a running time of 55 min for nutshell as the feedstock while the minimum liquid oil yield is found to be 30 wt% of feedstock at an optimum temperature of 400℃ for a feed size of 2.36 mm with a running time of 65 min for linseed residue as the feedstock. A comparison on the product yields is highlighted in this study. The pyrolysis liquid products are characterized and compared for some of the fuel properties like HHV （higher heating value）, viscosity, density and specific gravity.
基金supported by the National Natural Science Foundation of China (51804216)a scholarship from the China Scholarship Council (CSC) (201806255078)
文摘Designing high active,low cost and bifunctional electrocatalysts is urgent for developing clean energy storage and conversion systems.Transition metal selenides exhibit optimal electronic conductivity and tunable physicochemical properties,which endow them with potential for efficient electrocatalysts to facilitate the oxygen reduction and oxygen evolution reactions(ORR and OER).Herein,hollow NixCo0.85-xSe nanospheres were synthesized using a facile polyol based solution chemical method.The NixCo0.85-xSe exhibits an onset overpotential of 0.89 V for ORR,and an overpotential of 305 mV to achieve 10 mA cm^-2 for OER.Moreover,the NixCo0.85-xSe based Zn-air battery displays remarkable specific capacity and durability.Such superior catalytic performances can be attributed to the synergistic effect,large specific surface area and enhanced electron transfer rate.This approach provides a new way to design highly efficient bifunctional electrocatalysts for electrochemical energy storage and utilization.
基金supported by the National Natural Science Foundation of China (21673161 and 21905210)the Sino-German Center for Research Promotion (GZ 1400)。
文摘Two-dimensional(2 D) transition metal phosphides(TMPs) are predicted with many novel properties and various applications. As a member of TMPs family, molybdenum phosphide(MoP) exhibits many exotic physicochemical properties. However, the synthesis of high-quality2 D MoP single crystals is not reported due to the lack of reliable fabrication method, which limits the exploration of 2 D MoP. Here, we report the growth of high-quality ultrathin MoP single crystals with thickness down to 10 nm on liquid metals via chemical vapor deposition(CVD). The smooth surface of liquid Ga is regarded as a suitable growth substrate for producing 2 D MoP single crystals. The Mo source diffuses toward the Ga surface due to the high surface energy to react with phosphorus source, thus to fabricate ultrathin MoP single crystals. Then, we study the second harmonic generation(SHG) of 2 D MoP for the first time due to its intrinsic noncentrosymmetric structure. Our study provides an new approach to synthesize and explore other 2 D TMPs for future applications.
