A technology of ultrasonic-electric united desalting and dewatering of crude oil is studied. The ultrasonic setup is designed to form a standing-wave field, which is more efficient for agglomeration of water particles...A technology of ultrasonic-electric united desalting and dewatering of crude oil is studied. The ultrasonic setup is designed to form a standing-wave field, which is more efficient for agglomeration of water particles. The desalting and dewatering results of the ultrasonic-electric united process are compared with those of the electric process. For high salt-contenting crude oil （40-70 mg·L ^-1）, the salt content is still above 10.0 mg·L^-1 after crude oil has been treated by two-stage electric desalting process in refinery, which cannot meet the need of refinery. Ultrasonic-electric united process is a novel technology for treating the high salt-contenting oil. On the optimal operating conditions of the ultrasonic-electric united process, the salt content of crude oil can be reduced from 67 5 mg·L^-1 to 3.97 mg·L ^-1 by one-stage ultrasonic-electric united process, and the water content falls below 0.3% （by volume）. The results show that the ultrasonic-electric united process is more effective than the electric process in high salt-contenting oil desalting. This technology should be useful in the refinery process.展开更多
The influence of petroleum sulphonate (TRS) on interfacial properties and stability of the emulsions formed by formation water and asphaltene, resin and crude model oils from Gudong crude oil was investigated by measu...The influence of petroleum sulphonate (TRS) on interfacial properties and stability of the emulsions formed by formation water and asphaltene, resin and crude model oils from Gudong crude oil was investigated by measurement of interfacial shear viscosity, interfacial tension (IFT) and emulsion stability. With increasing petroleum sulphonate concentration, IFT between the formation water and the asphaltene, resin and crude model oils decreases significantly. The interfacial shear viscosity and emulsion stability of asphaltene and crude model oil system increase for the petroleum sulphonate concentration in the range 0.1% to 0.3%, and decrease slightly when the concentration of the surfactant is 0.5%. There exists a close correlation between the interfacial shear viscosity and the stability of the emulsions formed by asphaltene or crude model oils and petroleum sulphonate solution.The stability of the emulsions is determined by the strength of the interfacial film formed of petroleum sulphonate molecules and the natural interfacial active components in the asphaltene fraction and the crude oil. The asphaltene in the crude oil plays a major role in determining the interfacial properties and the stability of the emulsions.展开更多
文摘A technology of ultrasonic-electric united desalting and dewatering of crude oil is studied. The ultrasonic setup is designed to form a standing-wave field, which is more efficient for agglomeration of water particles. The desalting and dewatering results of the ultrasonic-electric united process are compared with those of the electric process. For high salt-contenting crude oil （40-70 mg·L ^-1）, the salt content is still above 10.0 mg·L^-1 after crude oil has been treated by two-stage electric desalting process in refinery, which cannot meet the need of refinery. Ultrasonic-electric united process is a novel technology for treating the high salt-contenting oil. On the optimal operating conditions of the ultrasonic-electric united process, the salt content of crude oil can be reduced from 67 5 mg·L^-1 to 3.97 mg·L ^-1 by one-stage ultrasonic-electric united process, and the water content falls below 0.3% （by volume）. The results show that the ultrasonic-electric united process is more effective than the electric process in high salt-contenting oil desalting. This technology should be useful in the refinery process.
基金国家重点基础研究发展计划(973计划)，an International Cooperation Research Program
文摘The influence of petroleum sulphonate (TRS) on interfacial properties and stability of the emulsions formed by formation water and asphaltene, resin and crude model oils from Gudong crude oil was investigated by measurement of interfacial shear viscosity, interfacial tension (IFT) and emulsion stability. With increasing petroleum sulphonate concentration, IFT between the formation water and the asphaltene, resin and crude model oils decreases significantly. The interfacial shear viscosity and emulsion stability of asphaltene and crude model oil system increase for the petroleum sulphonate concentration in the range 0.1% to 0.3%, and decrease slightly when the concentration of the surfactant is 0.5%. There exists a close correlation between the interfacial shear viscosity and the stability of the emulsions formed by asphaltene or crude model oils and petroleum sulphonate solution.The stability of the emulsions is determined by the strength of the interfacial film formed of petroleum sulphonate molecules and the natural interfacial active components in the asphaltene fraction and the crude oil. The asphaltene in the crude oil plays a major role in determining the interfacial properties and the stability of the emulsions.
