In this article,the Moore-Gibson-Thompson heat equation in three-dimensional cylindrical domain are studied.Using a second order differential inequality,we obtain that the solution can decay exponentially as the dista...In this article,the Moore-Gibson-Thompson heat equation in three-dimensional cylindrical domain are studied.Using a second order differential inequality,we obtain that the solution can decay exponentially as the distance from the entry section tends to infinity.Our result can be seen as a version of Saint-Venant principle.展开更多
针对西门子S7-1200PLC的AD采样过程中,因外界干扰、传感器采样数据扰动等原因导致的采样数据抖动问题,基于最小均方(LMS,least mean square)原理,设计了一种改进型加权平均数字滤波算法。在1200PLC中通过SCL语言编制对应的滤波算法程序,...针对西门子S7-1200PLC的AD采样过程中,因外界干扰、传感器采样数据扰动等原因导致的采样数据抖动问题,基于最小均方(LMS,least mean square)原理,设计了一种改进型加权平均数字滤波算法。在1200PLC中通过SCL语言编制对应的滤波算法程序,对AD采样的数据进行数字滤波。通过设计强干扰环境下的AD采样实验证明:该数字滤波算法高效、可靠,采样数据稳定、准确。展开更多
Piezoelectric composite material (PCM) is an important branch of modernsensor and actuator materials with wide applications in smart structures. In this paper, based onpiezoelectric ceramic, composite and experimental...Piezoelectric composite material (PCM) is an important branch of modernsensor and actuator materials with wide applications in smart structures. In this paper, based onpiezoelectric ceramic, composite and experimental mechanics theories, a kind of 1-3 orthogonalanisotropic PCM (OAPCM) sensor is developed, and the sensing principle is analyzed to describesensor behaviors. In order to determine strain and stress on isotropic or orthogonal anisotropiccomponent surface, the relationships between strain and stress are established. The experimentalresearch on 1-3 OAPCM sensor is carried out in uniaxial and biaxial stress states. The results showthat 1-3 OAPCM sensors offer orthotropic properties of piezoelectricity, and sensing equations canbe used for strain or stress measurement with good accuracy.展开更多
Discontinuous and long-duration thunderstorm weather, which occurred at Guanghan in Sichuan Province, was analyzed and predicted using structural conversion of irregular information in phase-space from self-recording ...Discontinuous and long-duration thunderstorm weather, which occurred at Guanghan in Sichuan Province, was analyzed and predicted using structural conversion of irregular information in phase-space from self-recording “time sequence” records for predicting rain areas, as described in the “Non Destructive Information” method proposed by Professor OuYang Shoucheng. The results show that this method can reveal important changes of weather as well as, by using irregular self-recording information recorded every ten minutes, predict local thunderstorms with durations of only half an hour, and even predict intense convections 12 hours in advance. This is significant for civil and military aviation. It shows the necessity of full utilization of information from automatic weather stations and the necessity of improvements in recording modes in current automatic stations.展开更多
In this paper, the fixed-point Theorem i s used to estimate an asymptotic solution of boundary value problems for a class o f third order quasilinear differential equation and the uniformly valid asymptot ic expansio...In this paper, the fixed-point Theorem i s used to estimate an asymptotic solution of boundary value problems for a class o f third order quasilinear differential equation and the uniformly valid asymptot ic expansion of solution of any orders including boundary layer is obtained.展开更多
In the past fifteen years, the attention of ship safety treatment as an objective rather than a constraint has started to sweep through the whole maritime industry. The risk-based ship design （RBD） methodology, advo...In the past fifteen years, the attention of ship safety treatment as an objective rather than a constraint has started to sweep through the whole maritime industry. The risk-based ship design （RBD） methodology, advocating systematic integration of risk assessment within the conventional design process has started to takeoff. Despite this wide recognition and increasing popularity, important factors that could potentially undermine the quality of the results come from both quantitative and qualitative aspects during the risk assessment process. This paper details a promising solution by developing a formalized methodology for risk assessment through effective storing and processing of historical data combined with data generated through first-principle approaches. This method should help to generate appropriate risk models in the selected platform （Bayesian networks） which can be employed for decision making at design stare.展开更多
We studied the electronic structure of the two new transition-metal carbodiimides CoNCN and NiNCN using first-principles method, which is based on density-functional theory （DFT）. The density of states （DOS）, the ...We studied the electronic structure of the two new transition-metal carbodiimides CoNCN and NiNCN using first-principles method, which is based on density-functional theory （DFT）. The density of states （DOS）, the total energy of the cell and the spin magnetic moment of CoNCN and NiNCN were calculated. The calculations reveal that the compound CoNCN and NiNCN have hall-metallic properties in ferromagnetic ground state, and the spin magnetic moment per molecule is about 7.000 μB and 6.000 μB for CoNCN and NiNCN, respectively.展开更多
The fixture layout is crucial to assure the product quality in a multistation assembly process （MAP）. A well-designed fixture layout will make the final product＇s variability be insensitive to the fixture variation...The fixture layout is crucial to assure the product quality in a multistation assembly process （MAP）. A well-designed fixture layout will make the final product＇s variability be insensitive to the fixture variation inputs. As the basis of the fixture layout design, the design criterion plays an important role in the effectiveness of a solution and the optimization efficiency. In this paper, an effective and efficient design criterion is proposed for the fixture layout with a fixed reference point （FRP） in an MAP. First of all, a state space model for the individual port＇s variation propagation and accumulation is developed, which is the mathematical foundation of the proposed criterion. Then, based on this model, a novel design criterion used to evaluate the performance of the fixture layout is proposed for the fixture layout with an FRP. Finally, a method extracted from the proposed design criterion is developed for quick fixture layout design. A four-station assembly process is used to validate the effectiveness and efficiency of the proposed models and methods.展开更多
基金Supported by the National Natural Science Foundation of China (11371175)the Research Team of Guangzhou Huashang College(2021HSKT01)Guangzhou Huashang College Mentorship Program(2020HSDS16)。
文摘In this article,the Moore-Gibson-Thompson heat equation in three-dimensional cylindrical domain are studied.Using a second order differential inequality,we obtain that the solution can decay exponentially as the distance from the entry section tends to infinity.Our result can be seen as a version of Saint-Venant principle.
文摘针对西门子S7-1200PLC的AD采样过程中,因外界干扰、传感器采样数据扰动等原因导致的采样数据抖动问题,基于最小均方(LMS,least mean square)原理,设计了一种改进型加权平均数字滤波算法。在1200PLC中通过SCL语言编制对应的滤波算法程序,对AD采样的数据进行数字滤波。通过设计强干扰环境下的AD采样实验证明:该数字滤波算法高效、可靠,采样数据稳定、准确。
文摘Piezoelectric composite material (PCM) is an important branch of modernsensor and actuator materials with wide applications in smart structures. In this paper, based onpiezoelectric ceramic, composite and experimental mechanics theories, a kind of 1-3 orthogonalanisotropic PCM (OAPCM) sensor is developed, and the sensing principle is analyzed to describesensor behaviors. In order to determine strain and stress on isotropic or orthogonal anisotropiccomponent surface, the relationships between strain and stress are established. The experimentalresearch on 1-3 OAPCM sensor is carried out in uniaxial and biaxial stress states. The results showthat 1-3 OAPCM sensors offer orthotropic properties of piezoelectricity, and sensing equations canbe used for strain or stress measurement with good accuracy.
基金The project is funded by Youth Scientific Research Foundation of CAFUC (Q2003-23).
文摘Discontinuous and long-duration thunderstorm weather, which occurred at Guanghan in Sichuan Province, was analyzed and predicted using structural conversion of irregular information in phase-space from self-recording “time sequence” records for predicting rain areas, as described in the “Non Destructive Information” method proposed by Professor OuYang Shoucheng. The results show that this method can reveal important changes of weather as well as, by using irregular self-recording information recorded every ten minutes, predict local thunderstorms with durations of only half an hour, and even predict intense convections 12 hours in advance. This is significant for civil and military aviation. It shows the necessity of full utilization of information from automatic weather stations and the necessity of improvements in recording modes in current automatic stations.
文摘In this paper, the fixed-point Theorem i s used to estimate an asymptotic solution of boundary value problems for a class o f third order quasilinear differential equation and the uniformly valid asymptot ic expansion of solution of any orders including boundary layer is obtained.
基金the financial support received by the University of Strathclyde in the form of a postgraduate research scholarship for the duration of the second author’s P hD studies
文摘In the past fifteen years, the attention of ship safety treatment as an objective rather than a constraint has started to sweep through the whole maritime industry. The risk-based ship design （RBD） methodology, advocating systematic integration of risk assessment within the conventional design process has started to takeoff. Despite this wide recognition and increasing popularity, important factors that could potentially undermine the quality of the results come from both quantitative and qualitative aspects during the risk assessment process. This paper details a promising solution by developing a formalized methodology for risk assessment through effective storing and processing of historical data combined with data generated through first-principle approaches. This method should help to generate appropriate risk models in the selected platform （Bayesian networks） which can be employed for decision making at design stare.
文摘We studied the electronic structure of the two new transition-metal carbodiimides CoNCN and NiNCN using first-principles method, which is based on density-functional theory （DFT）. The density of states （DOS）, the total energy of the cell and the spin magnetic moment of CoNCN and NiNCN were calculated. The calculations reveal that the compound CoNCN and NiNCN have hall-metallic properties in ferromagnetic ground state, and the spin magnetic moment per molecule is about 7.000 μB and 6.000 μB for CoNCN and NiNCN, respectively.
基金National Nature Science Foundation of China(No.71201025)Specialized Research Fund for the Doctoral Program of Higher Education,China(No.20110092120007)Jiangsu Key Laboratory of Equipments Detection and Control,China(No.JSKLEDC201215)
文摘The fixture layout is crucial to assure the product quality in a multistation assembly process （MAP）. A well-designed fixture layout will make the final product＇s variability be insensitive to the fixture variation inputs. As the basis of the fixture layout design, the design criterion plays an important role in the effectiveness of a solution and the optimization efficiency. In this paper, an effective and efficient design criterion is proposed for the fixture layout with a fixed reference point （FRP） in an MAP. First of all, a state space model for the individual port＇s variation propagation and accumulation is developed, which is the mathematical foundation of the proposed criterion. Then, based on this model, a novel design criterion used to evaluate the performance of the fixture layout is proposed for the fixture layout with an FRP. Finally, a method extracted from the proposed design criterion is developed for quick fixture layout design. A four-station assembly process is used to validate the effectiveness and efficiency of the proposed models and methods.
