Platy potassium magnesium titanate (K0.8Mg0.4Ti1.6O4, KMTO) was synthesized by a flux method. The potential application of KMTO in removing copper ions from water pollutants was investigated. The crystal phases of spe...Platy potassium magnesium titanate (K0.8Mg0.4Ti1.6O4, KMTO) was synthesized by a flux method. The potential application of KMTO in removing copper ions from water pollutants was investigated. The crystal phases of specimens were identified by XRD. The morphology and structural information were characterized by SEM and TEM. The adsorption behavior under different conditions was investigated, including different pH values and different initial copper ion concentrations. The results show that the maximum adsorption capacity of Cu(II) ions is 290.697 mg/g, and almost 99.9% of Cu(II) ions can be removed, which is much higher than that of other sorbents reported. The kinetics of KMTO for the adsorption of Cu(II)ions was studied and the best fit can be obtained by the pseudo-second-order model. Adsorption isothermal data can be well interpreted by the Freundlich equation (R2=0.991). In conclusion, this study highlights that KMTO is a potential material for the efficient removal of heavy metal ions in polluted water. It also opens up a new opportunity for the applications of platy KMTO.展开更多
The characteristics of the zeolite modified by microwave and sodium acetate and its sorption of ammonia-nitrogen from simulated water sample were investigated.The results show that the modified zeolite by microwave-so...The characteristics of the zeolite modified by microwave and sodium acetate and its sorption of ammonia-nitrogen from simulated water sample were investigated.The results show that the modified zeolite by microwave-sodium acetate(SMMZ)has a high sorption efficiency and removal performance.The ammonia-nitrogen removal rate of SMMZ reaches 92.90%.The surface of SMMZ becomes loose and some pores appear,the specific surface area,total pore volume and average pore diameter increase after modification.Compared to the natural zeolite,SMMZ has a more concentrated pore size distribution in the range of 0-10 nm.The cation exchange capacity(CEC)of SMMZ is higher than that of the natural zeolite.And the ammonia nitrogen removal rate is consistent with the change of CEC.The SMMZ possesses rapid sorption and slow balance characteristics and ammonia-nitrogen sorption is consistent with both Langmuir adsorption isotherm model and Freundlich adsorption isotherm model.The adsorption kinetics of ammonia-nitrogen follows the pseudo-second order kinetic model.展开更多
[Objective] The aim was to obtain higher COD removal rate so as to guide the process of citric acid industrial wastewater. [Method] The effects of controllable factors, acidification time, hydraulic retention time, an...[Objective] The aim was to obtain higher COD removal rate so as to guide the process of citric acid industrial wastewater. [Method] The effects of controllable factors, acidification time, hydraulic retention time, and influent COD concentration, in-anaerobic treatment process of citric acid wastewater on COD removal rate were studied and the COD removal rate was optimized by response surface method. [Result] There was no interaction between acidification time and the other two factors. It was showed that hydraulic retention time and influent COD concentration had significant effect on COD removal rate and there was interaction between the two factors. The optimum COD removing process conditions was as follows: acidification time 1.53 h, hydraulic retention time 3.52 h and influent COD concentration 2 698 mg/L. Under the optimized conditions, the COD removal rate was 93.31% and it was much closed to the experimental result, 93.29%. [Conclusion] Using response surface method to optimize the anaerobic treatment of citric acid wastewater can result in optimized achievement.展开更多
We evaluated several different pre-oxidation treatments, namely the introduction of either potassium permanganate (KMnO4), chlorine (Cl2), or both to remove manganese (Mn) from the Qiantang River source water. Our res...We evaluated several different pre-oxidation treatments, namely the introduction of either potassium permanganate (KMnO4), chlorine (Cl2), or both to remove manganese (Mn) from the Qiantang River source water. Our results showed that Mn removal percentages were 12.7%, 71.0%, 17.4% and 58.7% when none of the oxidants, KMnO4 only, Cl2 only, or both oxidants were added, respectively. Furthermore, a field study showed that when the available Mn concentration in the source water was 0.14 mg/L, it could be reduced to less than 0.05 mg/L when a solution of KMnO4 (0.47 mg/L) was added as the oxidant.展开更多
基金Project(51272289)supported by the National Natural Science Foundation of ChinaProject(51021063)supported by the Creative Research Group of National Science Foundation of China
文摘Platy potassium magnesium titanate (K0.8Mg0.4Ti1.6O4, KMTO) was synthesized by a flux method. The potential application of KMTO in removing copper ions from water pollutants was investigated. The crystal phases of specimens were identified by XRD. The morphology and structural information were characterized by SEM and TEM. The adsorption behavior under different conditions was investigated, including different pH values and different initial copper ion concentrations. The results show that the maximum adsorption capacity of Cu(II) ions is 290.697 mg/g, and almost 99.9% of Cu(II) ions can be removed, which is much higher than that of other sorbents reported. The kinetics of KMTO for the adsorption of Cu(II)ions was studied and the best fit can be obtained by the pseudo-second-order model. Adsorption isothermal data can be well interpreted by the Freundlich equation (R2=0.991). In conclusion, this study highlights that KMTO is a potential material for the efficient removal of heavy metal ions in polluted water. It also opens up a new opportunity for the applications of platy KMTO.
基金Project(51174017) supported by the National Natural Science Foundation of China
文摘The characteristics of the zeolite modified by microwave and sodium acetate and its sorption of ammonia-nitrogen from simulated water sample were investigated.The results show that the modified zeolite by microwave-sodium acetate(SMMZ)has a high sorption efficiency and removal performance.The ammonia-nitrogen removal rate of SMMZ reaches 92.90%.The surface of SMMZ becomes loose and some pores appear,the specific surface area,total pore volume and average pore diameter increase after modification.Compared to the natural zeolite,SMMZ has a more concentrated pore size distribution in the range of 0-10 nm.The cation exchange capacity(CEC)of SMMZ is higher than that of the natural zeolite.And the ammonia nitrogen removal rate is consistent with the change of CEC.The SMMZ possesses rapid sorption and slow balance characteristics and ammonia-nitrogen sorption is consistent with both Langmuir adsorption isotherm model and Freundlich adsorption isotherm model.The adsorption kinetics of ammonia-nitrogen follows the pseudo-second order kinetic model.
文摘[Objective] The aim was to obtain higher COD removal rate so as to guide the process of citric acid industrial wastewater. [Method] The effects of controllable factors, acidification time, hydraulic retention time, and influent COD concentration, in-anaerobic treatment process of citric acid wastewater on COD removal rate were studied and the COD removal rate was optimized by response surface method. [Result] There was no interaction between acidification time and the other two factors. It was showed that hydraulic retention time and influent COD concentration had significant effect on COD removal rate and there was interaction between the two factors. The optimum COD removing process conditions was as follows: acidification time 1.53 h, hydraulic retention time 3.52 h and influent COD concentration 2 698 mg/L. Under the optimized conditions, the COD removal rate was 93.31% and it was much closed to the experimental result, 93.29%. [Conclusion] Using response surface method to optimize the anaerobic treatment of citric acid wastewater can result in optimized achievement.
文摘We evaluated several different pre-oxidation treatments, namely the introduction of either potassium permanganate (KMnO4), chlorine (Cl2), or both to remove manganese (Mn) from the Qiantang River source water. Our results showed that Mn removal percentages were 12.7%, 71.0%, 17.4% and 58.7% when none of the oxidants, KMnO4 only, Cl2 only, or both oxidants were added, respectively. Furthermore, a field study showed that when the available Mn concentration in the source water was 0.14 mg/L, it could be reduced to less than 0.05 mg/L when a solution of KMnO4 (0.47 mg/L) was added as the oxidant.
