水滑石类化合物在去除废水中重金属方面的应用研究进展

水滑石类材料是一类具有特殊层状结构的阴离子黏土材料,具有碱性、离子交换性、记忆效应以及热分解性等特点,近年来受到人们的广泛关注。介绍了水滑石的结构、性质以及在治理重金属废水方面的应用,并对水滑石类化合物的进一步研究进行了展望。

喷嘴浮选法去除废水中乳化油

伟大的无产阶级文化大革命推动着我国社会主义建设事业更加迅速向前发展。在批林批孔大好形势的鼓舞下,北京化工三厂又新建了年产2.5万吨重油蓄热裂解车间。在重油裂解过程中产生了含油含酸及含有其它有害物质的废水。为了保护和改善首都环境,必须对废水进行妥善处理。在毛主席的“教育必须为无产阶级政治服务,必须同生产劳动相结合”的方针指导下,北京工业大学坚持“开门办学”的方向。

废水的土地处理

一、废水和污水的土地处理目前常用的废水和污水的土地处理方法有三种:1.缓慢灌溉(slow rate),2.快速渗滤(rapid infiltration),3.地表径流(overlandflow)。七十年代初,只有缓慢灌溉和快速渗滤两种方法用于处理城市废水。

Bacillus sp. Treatment of Wastewater Containing Antimony

Antimony ore dressing wastewater was treated by using Bacillus sp. and the influences of treatment time, temperature, inoculation size, and pH value on Sb removal effect were explored. The results showed that the best removal efficiency of Sb in mineral processing wastewater could reach 99.75% in 4 d under the optimum conditions of 30 ℃, microbial inoculated quantity 5%, and pH value at 2.0. After the treatment, the concentration of Sb in wastewater was reduced from 122.21 to 0.30mg/L, which was lower than the local industrial wastewater discharge standard of0.50 mg/L.

Synthesis of platy potassium magnesium titanate and its application in removal of copper ions from aqueous solution

Platy potassium magnesium titanate (K0.8Mg0.4Ti1.6O4, KMTO) was synthesized by a flux method. The potential application of KMTO in removing copper ions from water pollutants was investigated. The crystal phases of specimens were identified by XRD. The morphology and structural information were characterized by SEM and TEM. The adsorption behavior under different conditions was investigated, including different pH values and different initial copper ion concentrations. The results show that the maximum adsorption capacity of Cu(II) ions is 290.697 mg/g, and almost 99.9% of Cu(II) ions can be removed, which is much higher than that of other sorbents reported. The kinetics of KMTO for the adsorption of Cu(II)ions was studied and the best fit can be obtained by the pseudo-second-order model. Adsorption isothermal data can be well interpreted by the Freundlich equation (R2=0.991). In conclusion, this study highlights that KMTO is a potential material for the efficient removal of heavy metal ions in polluted water. It also opens up a new opportunity for the applications of platy KMTO.

Effect Research of Immobilized Algae-bacteria Removal Ammonia Nitrogen of Aquaculture Wastewater and Proposed Model

Applied Immobilized algae bacteria (ABI) to remove ammonia of freshwater aquaculture wastewater. Temperature (T),PH,light intensity (I),dissolved oxygen (DO) and filling rate five factors plays important role in the process of ammonia nitrogen removal ,related data between ammonia removal and five factors was received through multi-factor orthogonal test,and established relations model between the five factor and nitrogen removal. The results show that five-factors had significant effect on AR,and the best combinations for removing AR was temperature 30 ℃,pH=7.0,light intensity 6 000 lux,dissolved oxygen 5.0 mg/L and the fill rate 10%. According to the experimental data,equation model was proposed and coefficient of determination R2 =0.864 8,P<0.05. Samples T-test was done between the model predictions and the actual measured values.Test results showed that the significant difference of overall mean value sig. (2-tailed) was 0.978 (P>0.05),it Shows that had no significant difference between model predictions and the actual measured value,and model had a high degree of fitting.

反相悬浮聚合法合成高分子絮凝剂生产技术

水是人类生存和工农业生产的宝贵资源。随着我国工农业和生活用水日益增加,工业废水和生活废水与日俱增。为保护水资源,作好废水处理工作是至关重要的。高分子絮凝剂是去除废水中悬浮物的重要产品,在废水中投加很少剂量。

沸石+活性炭组合工艺的应用研究

沸石+活性炭组合工艺包含分别投加两种物质和制备成沸石/活性炭复合材料两种形式,但均可以有效地发挥沸石和活性炭的各自优势,同时去除废水的浊度、色度、氨氮及有机物,还被用于气体净化,分离等工艺中。

Degradation of polyvinyl-alcohol wastewater by Fenton’s reagent: Condition optimization and enhanced biodegradability

The pretreatment of refractory polyvinyl-alcohol （PVA） wastewater with low value of CODcr by Fenton＇s reagent was investigated to enhance the biodegradabilily. The effects of operating conditions such as pH of the solution, Fe2＋ dosage, H2O2 dosage, reaction time and initial PVA concentration on the removal efficiency of CODCr were discussed. It is demonstrated that the optimum value of pH for removal of CODcr is 5 and the most suitable dosages of H2O2 （2%） and FeSO4 （10 mg/L） are 5% and 8.0%, respectively. When the initial CODcr value of the PVA water is 760 mg/L, the favorable reaction time is 110 min. Under these optimum conditions, the removal ratio of CODcr is 58.6% 61.4%, and the value of biodegradability （CODB/CODcr） increases markedly from 8.9% 9.7% to 62.6% 68.3%.

Anoxic Biological Phosphorus Uptake in A^2O Process

A lab-scale anaerobic-anoxic-oxic (A2O) process used to treat a synthetic brewage wastewater was investigated. The objectives of the study were to identify the existence of denitrifying phosphorus removing bacteria (DPB), evaluate the contribution of DPB to biological nutrient removal and enhance the denitrifying phosphorus removal in A2O bioreactors. Sludge analysis confirmed that the average anoxic P uptake accounted for approximately 70% the total amount of P uptake, and the ratio of anoxic P uptake rate to aerobic P uptake rate was 69%. In addition, nitrate concentration in the anoxic phase and different organic substrate introduced into the anaerobic phase had significant effect on the anoxic P uptake. Compared with conventional A2O processes, good removal efficiencies of COD, phosphorus, ammonia and total nitrogen (92.3%, 95.5%, 96% and 79.5%, respectively) could be achieved in the anoxic P uptake system, and aeration energy consumption was saved 25%. By controlling the nitrate recirculation flow in the anoxic zone, anoxic P uptake could be enhanced, which solved the competition for organic substrates among poly-P organisms and denitrifiers successfully under the COD limiting conditions. Therefore, in wastewater treatment plants the control system should be applied according to the practical situation to optimize the operation.

Kinetics and mechanism of adsorptive removal of copper from aqueous solution with poly(vinyl alcohol) hydrogel

Recently, a renewed interest in techniques for heavy metal removal of wastewater has been growing because of embarking opportunities for industrial applications. We investigated the adsorption capacity of the copper on the poly（vinyl alcohol） hydrogel from the aqueous solution. Chemical structure and water absorption of the hydrogel were studied using FTIR and water uptake measurement, respectively. The results showed that the poly（vinyl alcohol） was crosslinked with glutaraldehyde, and the hydrogel highly exhibited the equilibrium swelling ratio because of its hydrophilicity property. Additionally, it was found that the adsorption process followed the pseudo-second-order kinetics and the mechanism diffusion was controlled by particle and film diffusions.

The Kinetics for Electrochemical Removal of Ammonia in Coking Wastewater

Electrochemical removal of ammonia is a new and effective method in coking wastewater.The reaction mechanism of ammonia removal was proved by stable polarization curve in this paper.First,the supposing of reaction steps of the electrode were proposed.And then reaction parameter of the electrode was measured by Tafel curve.Finally,the reaction mechanism was determined by quasi-equilibrium approach.The results showed that Cl2+H2O→HOCl+H++Cl was the rate-determining step,the calculated apparent transfer coefficient was uniform to the experimental value.

Reclaimation of petroleum-based wastewater by noval ozone immobilized biological activated carbon process

Wastewater reclamation in the petroleum industries in Northern China is important because of the shortage of water resource. Conventional treatment technology used：in treating petroleum-based wastewater, namely the 3-phase biological process, typically removes COD, BODI grease, volatile hydrobenzenes, cyanides, sulfides and suspended solids. However, the process is often ineffective in ammonia-nitrogen removal, and thus the treated effluent quantity can＇ t meet the required standards for reuse. This paper investigated a novel ozone immobilized biological activated carbon（O3-IBAC） process for ammonia nitrogen removal from petroleum-based wastewater. Operated at a HRT （ Hydraulic Retention Time） of 15 minutes in IBACI and 27 minutes in IBAC2, the O3-IBAC process achieved ammonia nitrogen removal efficiency of 91%. In addition, the removal efficiencies 6f COD, volatile hydrobenzenes, suspended solids, turbidity and petroleum-based micropollutants were all above 90%. Competition between the autotrophs and heterotrophs was observed, which was indicated by an increase of ammonia nitrogen removal with a decrease of COD removal, and vise versa. Nitrite accumulation in IBACI followed by erobic shortcut denitrification in IBAC2 led to 28% of the Total Nitrogen removal efficiency. Pollutant reduction in＇ the IBAC process was achieved by a rapid physical adsorption and biodegradation on the activated carbon, which effectively retained the pollutants in the system despite the short hydraulic retention time.

Synergism of Novel Sequence Bio-ecological Process and Biological Aerated Filter for Sewage Treatment in Cold Climate

A lab-scale integrated treatment system including the novel sequence bio-ecological process （SBEP） and biological aerated filter （BAF） for a sewage mixture （chemistry laboratory wastewater and domestic sewage） was presented in this paper. The main objective of the study was to test the contribution of artificial aeration, recir-culation ratio and mass concentration of steel slag on pollutant removal in winter when the plants are dormant. It had been shown that SBEP and BAF play different roles in removing contaminants from wastewater. During the airflow experiment, the removal efficiency of COD and TP in SBEP was higher than that in BAF, whereas BAF can compensate for the deficiency of SBEP where no significant improvement on ammonium nitrogen removal is ob-served. Yet, the removal etticiencies of COD,TP and NH4^＋ -N in SBEP could be improved apparently when ditterent recireulation ratio or various mass concentration of steel were applied. Especially, when the airflow of 0.06 L·h^-1, the recirculation ratio rate of 80% and the mass concentration of steel of 2.2-2.4 g·L^-1 were applied, thehighest efficiency of 94.6%, 77.9% and 80.7% for COD, TP and NH4^＋ -N were achieved,-respectively,The integrated treatment system of SBEP and BAF was proved to be an effective wastewater treatment technique and a better alternative to treat domestic sewage.

Modified two-phase anaerobic baffled process for low-concentration wastewater treatment

In this study low-concentration wastewater was investigated in the integral two-phase anaerobic baffled reactor by determining the removal of COD at various HRT,reflex ratios,and temperatures. Results indicate that the removal efficiency of COD is more than 90% at 25 ℃ and 10-h HRT with no wastewater recycled,and the removal efficiency is up to 88% at 8-h HRT and reflex ratio of 150%. The removal efficiency is decreased with the decreasing temperature and HRT. The removal efficiency of COD is approximately 60% at 10 ℃,which proves that the temperature does not affect it apparently. This research has significance for reducing the cost of wastewater and sludge treatment in cold area.

焦油/氨水分离剂在焦化生产中的应用

介绍了山东万和环保节能技术有限责任公司生产的焦油/氨水分离剂的工作原理和作用,分析了它的投资回报,给出了4个应用案例。在文末简要介绍了该公司推出的新产品——焦化废水COD去除剂系列的情况。

Simultaneous removal of nitrogen and phosphorus from swine wastewater in a sequencing batch biofilm reactor

In this study, the performance of a sequencing batch biofilm reactor(SBBR) for removal of nitrogen and phosphorus from swine wastewater was evaluated. The replacement rate of wastewater was set at 12.5% throughout the experiment. The anaerobic and aerobic times were 3 h and 7 h, respectively, and the dissolved oxygen concentration of the aerobic phase was about 3.95 mg·L-1. The SBBR process demonstrated good performance in treating swine wastewater. The percentage removal of total chemical oxygen demand(COD), ammonia nitrogen(NH4+-N), total nitrogen(TN), and total phosphorus(TP) was 98.2%, 95.7%, 95.6%, and 96.2% at effluent concentrations of COD85.6 mg·L-1, NH4+-N 35.22 mg·L-1, TN 44.64 mg·L-1, and TP 1.13 mg·L-1, respectively. Simultaneous nitrification and denitrification phenomenon was observed. Further improvement in removal efficiency of NH4+-N and TN occurred at COD/TN ratio of 11:1, with effluent concentrations at NH4+-N 18.5 mg·L-1and TN 34 mg·L-1, while no such improvement in COD and TP removal was found. Microbial electron microscopy analysis showed that the filler surface was covered with a thick biofilm, forming an anaerobic–aerobic microenvironment and facilitating the removal of nitrogen, phosphorus and organic matters. A long-term experiment(15 weeks) showed that stable removal efficiency for N and P could be achieved in the SBBR system.

Performance and Modeling of an Up-flow Anaerobic Sludge Blanket(UASB) Reactor for Treating High Salinity Wastewater from Heavy Oil Production

In this study,an up-flow anaerobic sludge blanket(UASB) reactor was applied to treat the high salinity wastewater from heavy oil production process.At a HRT of ≥24 h,the COD removal reached as high as 65.08% at an influent COD ranging from 350mg/L to 640mg/L.An average of 74.33% oil reduction was also achieved in the UASB reactor at an initial oil concentration between 112mg/L and 205mg/L.These results indicated that this heavy oil production related wastewater could be degraded efficiently in the UASB reactor.Granular sludge was formed in this reactor.In addition,two models,built on the back propagation neural network(BPNN) theory and linear regression techniques were developed for the simulation of the UASB system performance in the oily wastewater biodegradation.The average error of COD and oil removal was-0.65% and 0.84%,respectively.The results indicated that the models built on the BPNN theory were wellfitted to the detected data,and were able to simulate and predict the removal of COD and oil by the UASB reactor.