A method for integer ambiguity resolution in the global positioning system （GPS） multi-reference station network real time kinematic （RTK） is proposed. First, the barycenter of the triangle of reference stations f...A method for integer ambiguity resolution in the global positioning system （GPS） multi-reference station network real time kinematic （RTK） is proposed. First, the barycenter of the triangle of reference stations for ambiguity resolution is taken as a reference point. The satellite which has the largest elevation angle with the reference point is selected as a reference satellite. The parameters for constructing the weight matrix of carrier phase observation and the criteria for checking the correctness of integer ambiguity resolution of a network are obtained. Then, the wide ambiguity is calculated by a linear combination method of dualband observation. And the LI ambiguity is obtained by a nonionosphere combination method. The Kalman filter is introduced to refine the floating-point solution of ambiguity and estimate the real-time tropospheric delay. Finally, the cofactor matrix of ambiguity is de-correlated by Z-transformation to reduce the searching space of the integer ambiguity solution and improve the efficiency of the least-squares ambiguity decorrelation adjustment （LAMBDA） algorithm. The experimental results show that this method can reliably obtain the integer ambiguity solution among multi-reference stations with 40 epochs.展开更多
This paper presents a new depth migration method, adaptive spatial-division split-step Fourier （ASDSSF） migration. In this method we introduce the idea of a stratified phase shift migration into the split-step Fouri...This paper presents a new depth migration method, adaptive spatial-division split-step Fourier （ASDSSF） migration. In this method we introduce the idea of a stratified phase shift migration into the split-step Fourier （SSF） migration to make an accurate and efficient wave field image when sharp discontinuities appear in the velocity field. In principle, the ASDSSF migration is a multi-reference slowness （reciprocal of velocity） （MRS） migration. Compared to previous MRS migration methods, this method uses fewer reference slowness values without accuracy loss. The reference slowness is determined in this paper according to an error-control parameter of the perturbation term in the SSF operator and the variation of the complet velocity field. The velocity corresponded to reference slowness can define a spatial division. Each division can also be divided into several discontinuous spatial subdivisions to effectively reduce the number of reference slowness values needed. The choice of reference slowness, including the number of reference slowness values needed and how to construct the spatial divisions, is adaptive and reasonable at each extrapolation step （depth step）. A simple and economical smoothing filter in the wave number-frequency domain is designed to avoid artifacts in the wave field extrapolation due to the presence of sharp discontinuities in the velocity field. For comparable conditions the present approach to migration is expected to be computationally more efficient and accurate than other MRS migration methods. The performance of the method is demonstrated on a simple 2D prestack model and the prestack SEG/EAEG salt dataset.展开更多
Based on perturbation theory, the wave equation extrapolation operator with mixed domains has the ability to deal with lateral velocity variations. It is the image method that has undergone much research in seismology...Based on perturbation theory, the wave equation extrapolation operator with mixed domains has the ability to deal with lateral velocity variations. It is the image method that has undergone much research in seismology. All extrapolation operators face the problem of choosing the reference velocity due to continuation in depth. The wavefield extrapolation operator with a single reference velocity is suitable for media with weak lateral variation. The multi-reference velocity extrapolation operator can cope with severe lateral velocity variations and improve image accuracy. However, the calculation cost is large. We present a self-adaptive approach to automatically determine the number of selected reference velocities according to the complexity of structure and the given velocity threshold value. The approach can be used to construct the SSF, FFD, WXFD, and GSP multi-reference velocity wavefield extrapolation image algorithms. The result of a salt-dome model data test demonstrates that the self-adoptive multi-reference wavefield extrapolation algorithm has the ability to deal with severe lateral velocity variations and can also be used for structure edge detection. The method is flexible and computationally cost-effective.展开更多
Accurate detection and picking of the P-phase onset time in noisy microseismic data from underground mines remains a big challenge. Reliable P-phase onset time picking is necessary for accurate source location needed ...Accurate detection and picking of the P-phase onset time in noisy microseismic data from underground mines remains a big challenge. Reliable P-phase onset time picking is necessary for accurate source location needed for planning and rescue operations in the event of failures. In this paper, a new technique based on the discrete stationary wavelet transform （DSWT）and higher order statist!cs, is proposed for processing noisy data from underground mines. The objectives of this method are to （1） Improve manual detection and tPicking of P-phase onset; and （ii） provide an automatic means of detecting and picking P-phase onset me accurately. The DSWT is first used to filter the signal over several scales. The manual P-phase onset detection and picking are then obtained by computing the signal energy across selected scales with frequency bands that capture the signal of interest. The automatic P-phase onset, on the other hand, is achieved by using skewness- and kurtosis-based criterion applied to selected scales in a time-frequency domain. The method was tested using synthetic and field data from an underground limestone mine. Results were compared with results obtained by using the short-term to long-term average （STA/LTA） ratio and that by Reference Ge et al. （2009）. The results show that the me!hod provides a more reliable estimate of the P-phase onset arrival than the STA]LTA method when the signal to noise ratio is very low. Also, the results obtained from the field data matched accurately with the results from Reference Ge et al. （2009）.展开更多
Based on a new type of tunnel configuration model with flue in the top of it, the paper simulated the smoke pervasion when fire happens in this type of tunnel by FDS. The results show that the setting up of the flue o...Based on a new type of tunnel configuration model with flue in the top of it, the paper simulated the smoke pervasion when fire happens in this type of tunnel by FDS. The results show that the setting up of the flue outlet reduces the backing up distance of combustion smoke, and the distance of people fleeing is also shortened. But under this condition the smoke density inside and outside of the two flue outlet increases evidently. However, when the exhausted fans are designed at smoking outlet, the smoke movement is accelerated and almost moved into the upper space. This configuration makes the fire smoke density outside of the flue outlet reduced greatly. When the exhausted velocity increased up to a certain critical level, the smoke concentration outside of the flue outlet will reduce at the value which is no harmonious to people＇s life. This situation will offer a relatively safe space for people fleeing, and fire rescuing can also be carried out from two directions. Therefore, this tunnel configuration mentioned in this article give a new reference mode for personnel flee, fire rescuing and tunnel maintenance.展开更多
文摘目的建立肠道病毒A组71型(enterovirus A71,EV-A71)灭活疫苗病毒参考品,用于病毒滴度内部质控品及灭活效果验证实验室评价。方法建立1批病毒参考品,按照《中华人民共和国药典》对其进行检定,包括无菌、支原体及分子生物学鉴定检查等。对其滴度进行标定和储存稳定性研究,并进行病毒滴定和灭活效果验证方面的应用研究。结果建立的EV-A71病毒参考品无菌检查及支原体检查结果均符合规定。分子生物学鉴定结果显示参考品只含有单一的EV-A71 VP1特异性条带。EV-A71病毒参考品标定后的滴度平均值为7.000 lgCCID_(50)/ml(95%CI为6.917~7.083 lgCCID_(50)/ml),可接受范围为6.566~7.434 lgCCID_(50)/ml,变异系数(coefficient of variation,CV)为3.01%,于-60℃及以下存放12个月的CV为2.08%,稳定性良好。将参考品作为病毒滴定测定的内部质控品应用于日常监测50次试验,滴度趋势分析结果显示未出现超趋势现象(out of trend,OOT)且均在警戒限内;将参考品作为阳性对照应用于灭活效果验证,结果显示细胞感染法及免疫荧光法的检测结果较为一致。结论建立了EV-A71病毒感染性滴度检测用参考品(EV-A71病毒参考品),12个月内储存稳定性良好,可用于EV-A71灭活疫苗生产工艺中病毒滴度评价和控制,以及作为灭活效果验证中的阳性对照,从而为单价或多价肠道病毒灭活疫苗的研究提供理论依据。
基金The National Key Technology R&D Program of Chinaduring the11th Five-Year Plan Period (No2008BAJ11B05)
文摘A method for integer ambiguity resolution in the global positioning system （GPS） multi-reference station network real time kinematic （RTK） is proposed. First, the barycenter of the triangle of reference stations for ambiguity resolution is taken as a reference point. The satellite which has the largest elevation angle with the reference point is selected as a reference satellite. The parameters for constructing the weight matrix of carrier phase observation and the criteria for checking the correctness of integer ambiguity resolution of a network are obtained. Then, the wide ambiguity is calculated by a linear combination method of dualband observation. And the LI ambiguity is obtained by a nonionosphere combination method. The Kalman filter is introduced to refine the floating-point solution of ambiguity and estimate the real-time tropospheric delay. Finally, the cofactor matrix of ambiguity is de-correlated by Z-transformation to reduce the searching space of the integer ambiguity solution and improve the efficiency of the least-squares ambiguity decorrelation adjustment （LAMBDA） algorithm. The experimental results show that this method can reliably obtain the integer ambiguity solution among multi-reference stations with 40 epochs.
文摘This paper presents a new depth migration method, adaptive spatial-division split-step Fourier （ASDSSF） migration. In this method we introduce the idea of a stratified phase shift migration into the split-step Fourier （SSF） migration to make an accurate and efficient wave field image when sharp discontinuities appear in the velocity field. In principle, the ASDSSF migration is a multi-reference slowness （reciprocal of velocity） （MRS） migration. Compared to previous MRS migration methods, this method uses fewer reference slowness values without accuracy loss. The reference slowness is determined in this paper according to an error-control parameter of the perturbation term in the SSF operator and the variation of the complet velocity field. The velocity corresponded to reference slowness can define a spatial division. Each division can also be divided into several discontinuous spatial subdivisions to effectively reduce the number of reference slowness values needed. The choice of reference slowness, including the number of reference slowness values needed and how to construct the spatial divisions, is adaptive and reasonable at each extrapolation step （depth step）. A simple and economical smoothing filter in the wave number-frequency domain is designed to avoid artifacts in the wave field extrapolation due to the presence of sharp discontinuities in the velocity field. For comparable conditions the present approach to migration is expected to be computationally more efficient and accurate than other MRS migration methods. The performance of the method is demonstrated on a simple 2D prestack model and the prestack SEG/EAEG salt dataset.
基金The work is financially supported by the "973" project "Large-scale Scientific Calculation and its Use in the Petroleum Industry (G19990328)" by the "863" Project "High Accuracy Seismic Exploration Technologies in the Transition Area (2000AA602018)" also by the Geophysical Research Institute, Shengli Oilfield Ltd. SINOPEC.
文摘Based on perturbation theory, the wave equation extrapolation operator with mixed domains has the ability to deal with lateral velocity variations. It is the image method that has undergone much research in seismology. All extrapolation operators face the problem of choosing the reference velocity due to continuation in depth. The wavefield extrapolation operator with a single reference velocity is suitable for media with weak lateral variation. The multi-reference velocity extrapolation operator can cope with severe lateral velocity variations and improve image accuracy. However, the calculation cost is large. We present a self-adaptive approach to automatically determine the number of selected reference velocities according to the complexity of structure and the given velocity threshold value. The approach can be used to construct the SSF, FFD, WXFD, and GSP multi-reference velocity wavefield extrapolation image algorithms. The result of a salt-dome model data test demonstrates that the self-adoptive multi-reference wavefield extrapolation algorithm has the ability to deal with severe lateral velocity variations and can also be used for structure edge detection. The method is flexible and computationally cost-effective.
文摘Accurate detection and picking of the P-phase onset time in noisy microseismic data from underground mines remains a big challenge. Reliable P-phase onset time picking is necessary for accurate source location needed for planning and rescue operations in the event of failures. In this paper, a new technique based on the discrete stationary wavelet transform （DSWT）and higher order statist!cs, is proposed for processing noisy data from underground mines. The objectives of this method are to （1） Improve manual detection and tPicking of P-phase onset; and （ii） provide an automatic means of detecting and picking P-phase onset me accurately. The DSWT is first used to filter the signal over several scales. The manual P-phase onset detection and picking are then obtained by computing the signal energy across selected scales with frequency bands that capture the signal of interest. The automatic P-phase onset, on the other hand, is achieved by using skewness- and kurtosis-based criterion applied to selected scales in a time-frequency domain. The method was tested using synthetic and field data from an underground limestone mine. Results were compared with results obtained by using the short-term to long-term average （STA/LTA） ratio and that by Reference Ge et al. （2009）. The results show that the me!hod provides a more reliable estimate of the P-phase onset arrival than the STA]LTA method when the signal to noise ratio is very low. Also, the results obtained from the field data matched accurately with the results from Reference Ge et al. （2009）.
文摘Based on a new type of tunnel configuration model with flue in the top of it, the paper simulated the smoke pervasion when fire happens in this type of tunnel by FDS. The results show that the setting up of the flue outlet reduces the backing up distance of combustion smoke, and the distance of people fleeing is also shortened. But under this condition the smoke density inside and outside of the two flue outlet increases evidently. However, when the exhausted fans are designed at smoking outlet, the smoke movement is accelerated and almost moved into the upper space. This configuration makes the fire smoke density outside of the flue outlet reduced greatly. When the exhausted velocity increased up to a certain critical level, the smoke concentration outside of the flue outlet will reduce at the value which is no harmonious to people＇s life. This situation will offer a relatively safe space for people fleeing, and fire rescuing can also be carried out from two directions. Therefore, this tunnel configuration mentioned in this article give a new reference mode for personnel flee, fire rescuing and tunnel maintenance.
