Integral imaging is a three dimensional(3D)display technology without any additional equipment.A new system is proposed in this paper which consists of the elemental images of real images in real mode(RIRM)and the one...Integral imaging is a three dimensional(3D)display technology without any additional equipment.A new system is proposed in this paper which consists of the elemental images of real images in real mode(RIRM)and the ones of virtual images in real mode(VIRM).The real images in real mode are the same as the conventional integral images.The virtual images in real mode are obtained by changing the coordinates of the corresponding points in elemental images which can be reconstructed by the lens array in virtual space.In order to reduce the spot size of the reconstructed images,the diffuser in conventional integral imaging is given up in the proposed method.Then the spot size is nearly1/20 of that in the conventional system.And an optical integral imaging system is constructed to confirm that our proposed method opens a new way for the application of the passive 3D display technology.展开更多
A temporal approach to fast shape measurement is presented.In principle,the rotational object method is used in combination with the sequence pulse counting method (SPCM) to determine the height of the object through ...A temporal approach to fast shape measurement is presented.In principle,the rotational object method is used in combination with the sequence pulse counting method (SPCM) to determine the height of the object through calculating the related phase.Two specimens are tested to demonstrate the validity of the approach.One is an object covered by a Chinese character (tea) with a height variety of 0.3 mm,and the other is an object surface with a relatively large fluctuation of 3.5 mm.The experimental results are compared with mechanical measurements.An axis shifting method is also proposed to determine shapes with relatively large fluctuations.Effects of such parameters on the height measurement as incident angle of the dual light beams,tilting angle of the object,and azimuth angle of the measured point are discussed as well.展开更多
基金supported by the National Natural Science Foundation of China(No.11474169)
文摘Integral imaging is a three dimensional(3D)display technology without any additional equipment.A new system is proposed in this paper which consists of the elemental images of real images in real mode(RIRM)and the ones of virtual images in real mode(VIRM).The real images in real mode are the same as the conventional integral images.The virtual images in real mode are obtained by changing the coordinates of the corresponding points in elemental images which can be reconstructed by the lens array in virtual space.In order to reduce the spot size of the reconstructed images,the diffuser in conventional integral imaging is given up in the proposed method.Then the spot size is nearly1/20 of that in the conventional system.And an optical integral imaging system is constructed to confirm that our proposed method opens a new way for the application of the passive 3D display technology.
基金supported by the National Natural Science Foundation of China(Grants Nos. 10972113,10732080)the National Basic Research Program of China(Grant Nos. 2007CB936803,2010CB631005)SRFDP(Grant No. 20070003053)
文摘A temporal approach to fast shape measurement is presented.In principle,the rotational object method is used in combination with the sequence pulse counting method (SPCM) to determine the height of the object through calculating the related phase.Two specimens are tested to demonstrate the validity of the approach.One is an object covered by a Chinese character (tea) with a height variety of 0.3 mm,and the other is an object surface with a relatively large fluctuation of 3.5 mm.The experimental results are compared with mechanical measurements.An axis shifting method is also proposed to determine shapes with relatively large fluctuations.Effects of such parameters on the height measurement as incident angle of the dual light beams,tilting angle of the object,and azimuth angle of the measured point are discussed as well.
