3 D roll-forming for high strength steel sheets is a new technology at present.Double racks gear 3D roll forming machine developed by our research group can be used to perform variable cross section roll forming for h...3 D roll-forming for high strength steel sheets is a new technology at present.Double racks gear 3D roll forming machine developed by our research group can be used to perform variable cross section roll forming for high strength steel.In the paper,a dynamic model of 8-DOF double rack gear 3D roll-forming machine is established by the method of Lagrange equation.The expression of the angle acceleration of the system response is obtained by solving the dynamic equations.Through an actual engineering example,the dynamical characters of the 3D roll forming machine are revealed.The results can support the design of 3D roll forming machine.Meanwhile,the research will play an active role in the development of control system.展开更多
In view of the axial force produced in the working process of double arc helical gear hydraulic pump,the theory of differential equation of curve and curved surface was utilized so that the calculation formula of axia...In view of the axial force produced in the working process of double arc helical gear hydraulic pump,the theory of differential equation of curve and curved surface was utilized so that the calculation formula of axial force was obtained and the relationship between the axial force and structure parameters of gears was clarified.In order to balance the axial force,the pressure oil in the high pressure area was introduced into the end face of the plunger to press the plunger against the gear shaft,and the hydrostatic bearing whose type is plunger at the end of the shaft was designed.In order to verify the balance effect of axial force,the leakage owing to end clearance and volume efficiency of gear hydraulic pump before and after the balancing process was analyzed.This paper provides a new analysis idea and balance scheme for the axial force produced in the working process of the double arc helical gear hydraulic pump,which can reduce the leakage owing to end clearance caused by the axial force and improve the volume efficiency of the gear hydraulic pump.展开更多
Low voltage ride through (LVRT) capability has become more and more an issue for newly integrated wind turbines. The LVRT programs described in this paper developed field tests for newly installed wind turbines on win...Low voltage ride through (LVRT) capability has become more and more an issue for newly integrated wind turbines. The LVRT programs described in this paper developed field tests for newly installed wind turbines on wind farms in Northeast China. It is therefore different from other papers that only validate LVRT control strategies through running computer software simulations. To examine a single wind turbine's LVRT capability, the wind turbine's terminal voltage dip was realized by using a grid voltage dip emulator, which was located on the 690 V side of the generator transformer. In this paper, by artificially making various grid faults, the dynamic behavior of DFIG and PMSG wind turbines are analyzed and compared, control strategies such as active/passive crowbar and chopper protection schemes are verified, and new active/reactive power compensation methods are investigated and compared.展开更多
Oscillating water column （OWC） based wave energy plants have been designed with several types of bidirectional turbines for converting pneumatic power to shaft power. Impulse turbines with linked guide vanes and fix...Oscillating water column （OWC） based wave energy plants have been designed with several types of bidirectional turbines for converting pneumatic power to shaft power. Impulse turbines with linked guide vanes and fixed guide vanes have been tested at the Indian Wave Energy plant. This was after initial experimentation with Well＇s turbines. In contrast to the Well＇s turbine which has a linear damping characteristic, impulse turbines have non-linear damping. This has an important effect in the overall energy conversion from wave to wire. Optimizing the wave energy plant requires a turbine with linear damping and good efficiency over a broad range of flow coefficient. This work describes how such a design can be made using fixed guide vane impulse turbines. The Indian Wave Energy plant is used as a case study.展开更多
Turbocharging and direct injection are main technologies used for energy-saving gasoline engines. But the biggest challenge is super-knock, whose mechanism is unclear and has no effective strategy to suppress this sup...Turbocharging and direct injection are main technologies used for energy-saving gasoline engines. But the biggest challenge is super-knock, whose mechanism is unclear and has no effective strategy to suppress this super-knock until now. The effects of injection strategies on super-knock were experimentally investigated in a turbocharged GDI engine. It was found that two-stage injections during intake stroke （TSII） can eliminate super-knock. Meanwhile, the fuel consumption, emissions and exhaust tem- perature can keep optimized level. By sweeping the start of the 1st injection （SOIl）, end of the 2nd injection （EOI2） and the split injection ratios （ROI2） using 5000 cycles evaluation test at low-speed high load operating point, the optimized injection strategy for the typical TC-GDI engine is TSII with SOIl at middle of intake stroke, EOI2 at end of intake stroke, and ROI2 of 0.3.展开更多
基金Supported by the National Science and Technology Supporting Plan Projects of China （No.2011BAG03B03）.
文摘3 D roll-forming for high strength steel sheets is a new technology at present.Double racks gear 3D roll forming machine developed by our research group can be used to perform variable cross section roll forming for high strength steel.In the paper,a dynamic model of 8-DOF double rack gear 3D roll-forming machine is established by the method of Lagrange equation.The expression of the angle acceleration of the system response is obtained by solving the dynamic equations.Through an actual engineering example,the dynamical characters of the 3D roll forming machine are revealed.The results can support the design of 3D roll forming machine.Meanwhile,the research will play an active role in the development of control system.
文摘In view of the axial force produced in the working process of double arc helical gear hydraulic pump,the theory of differential equation of curve and curved surface was utilized so that the calculation formula of axial force was obtained and the relationship between the axial force and structure parameters of gears was clarified.In order to balance the axial force,the pressure oil in the high pressure area was introduced into the end face of the plunger to press the plunger against the gear shaft,and the hydrostatic bearing whose type is plunger at the end of the shaft was designed.In order to verify the balance effect of axial force,the leakage owing to end clearance and volume efficiency of gear hydraulic pump before and after the balancing process was analyzed.This paper provides a new analysis idea and balance scheme for the axial force produced in the working process of the double arc helical gear hydraulic pump,which can reduce the leakage owing to end clearance caused by the axial force and improve the volume efficiency of the gear hydraulic pump.
文摘Low voltage ride through (LVRT) capability has become more and more an issue for newly integrated wind turbines. The LVRT programs described in this paper developed field tests for newly installed wind turbines on wind farms in Northeast China. It is therefore different from other papers that only validate LVRT control strategies through running computer software simulations. To examine a single wind turbine's LVRT capability, the wind turbine's terminal voltage dip was realized by using a grid voltage dip emulator, which was located on the 690 V side of the generator transformer. In this paper, by artificially making various grid faults, the dynamic behavior of DFIG and PMSG wind turbines are analyzed and compared, control strategies such as active/passive crowbar and chopper protection schemes are verified, and new active/reactive power compensation methods are investigated and compared.
文摘Oscillating water column （OWC） based wave energy plants have been designed with several types of bidirectional turbines for converting pneumatic power to shaft power. Impulse turbines with linked guide vanes and fixed guide vanes have been tested at the Indian Wave Energy plant. This was after initial experimentation with Well＇s turbines. In contrast to the Well＇s turbine which has a linear damping characteristic, impulse turbines have non-linear damping. This has an important effect in the overall energy conversion from wave to wire. Optimizing the wave energy plant requires a turbine with linear damping and good efficiency over a broad range of flow coefficient. This work describes how such a design can be made using fixed guide vane impulse turbines. The Indian Wave Energy plant is used as a case study.
基金supported by the National Natural Science Foundation of China(Grant No.51036004)the Ministry of Science and Technology of China through the Project 2012AA111715
文摘Turbocharging and direct injection are main technologies used for energy-saving gasoline engines. But the biggest challenge is super-knock, whose mechanism is unclear and has no effective strategy to suppress this super-knock until now. The effects of injection strategies on super-knock were experimentally investigated in a turbocharged GDI engine. It was found that two-stage injections during intake stroke （TSII） can eliminate super-knock. Meanwhile, the fuel consumption, emissions and exhaust tem- perature can keep optimized level. By sweeping the start of the 1st injection （SOIl）, end of the 2nd injection （EOI2） and the split injection ratios （ROI2） using 5000 cycles evaluation test at low-speed high load operating point, the optimized injection strategy for the typical TC-GDI engine is TSII with SOIl at middle of intake stroke, EOI2 at end of intake stroke, and ROI2 of 0.3.
