The effect of strong reflection interfaces, such as free surface, seabed, is strong; thus, the coupling of multiples and waves reduces the quality of ocean-bottom cable seismic data. Using the different polarity respo...The effect of strong reflection interfaces, such as free surface, seabed, is strong; thus, the coupling of multiples and waves reduces the quality of ocean-bottom cable seismic data. Using the different polarity response of hydrophones and geophones to downgoing wave fields, dual-sensor summation can eliminate receiver-side multiples, enhance primaries, and improve the resolution of seismic data. We present a dual-sensor summation method based on the equipoise pseudo-multichannel adaptive matching filter. Compared with traditional methods, the proposed method is totally data driven and does not depend on the reflection coefficient; moreover, good results are obtained using synthetic and real data.展开更多
Effects of process parameters on microstructure and mechanical properties of the AM50A magnesium alloy components formed by double control forming （DCF） were investigated via a four-factor and four-level orthogonal ...Effects of process parameters on microstructure and mechanical properties of the AM50A magnesium alloy components formed by double control forming （DCF） were investigated via a four-factor and four-level orthogonal experiment. The variable curves of DCF showed that the forging procedure was started in the following 35 ms after the injection procedure was completed. It was confirmed that the high-speed filling and high-pressure densifying were combined together in the DCF process. Better surface quality and higher mechanical properties were achieved in the components formed by DCF as compared to die casting （DC） due to the refined and uniform microstructure with a few defects or without defects. Injection speed affected more effectively the yield strength （YS）, ultimate tensile strength （UTS） and elongation as compared to pouring temperature, die temperature and forging force. But the pouring temperature had a more significant effect on hardness as compared to injection speed, die temperature and forging force. Pouring temperature of 675 ＆#176;C, injection speed of 2.7 m/s and forging force of 4000 kN except for die temperature were the optimal parameters for obtaining the highest YS, UTS, elongation and Vickers hardness. Die temperatures of 205, 195, 195 and 225 ＆#176;C were involved in achieving the highest YS, UTS, elongation and Vickers hardness, respectively. Obvious microporosity and microcracks were found on the fracture surface of the components formed by DC, deteriorating the mechanical properties. However, the tensile fracture morphology of the components formed by DCF was characterized by ductile fracture due to a large number of dimples and no defects, which was beneficial for improving the mechanical properties.展开更多
Seven new alkylenedibiguanides were synthesized and comfirmed by 1H NMR, MS and elemental analyses. The preliminary test in vitro showed that some of them had potential antibacterial activities.
基金supported jointly by the National Science Foundation Project(Grant No.41176077 and 41230318)
文摘The effect of strong reflection interfaces, such as free surface, seabed, is strong; thus, the coupling of multiples and waves reduces the quality of ocean-bottom cable seismic data. Using the different polarity response of hydrophones and geophones to downgoing wave fields, dual-sensor summation can eliminate receiver-side multiples, enhance primaries, and improve the resolution of seismic data. We present a dual-sensor summation method based on the equipoise pseudo-multichannel adaptive matching filter. Compared with traditional methods, the proposed method is totally data driven and does not depend on the reflection coefficient; moreover, good results are obtained using synthetic and real data.
基金Project(51075099)supported by the National Natural Science Foundation of ChinaProject(E201038)supported by the Natural Science Foundation of Heilongjiang Province,China+2 种基金Project(HIT.NSRIF.2013007)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2011RFQXG010)supported by the Harbin City Young Scientists Foundation,ChinaProject(LBH-T1102)supported by Specially Postdoctoral Science Foundation of Heilongjiang Province,China
文摘Effects of process parameters on microstructure and mechanical properties of the AM50A magnesium alloy components formed by double control forming （DCF） were investigated via a four-factor and four-level orthogonal experiment. The variable curves of DCF showed that the forging procedure was started in the following 35 ms after the injection procedure was completed. It was confirmed that the high-speed filling and high-pressure densifying were combined together in the DCF process. Better surface quality and higher mechanical properties were achieved in the components formed by DCF as compared to die casting （DC） due to the refined and uniform microstructure with a few defects or without defects. Injection speed affected more effectively the yield strength （YS）, ultimate tensile strength （UTS） and elongation as compared to pouring temperature, die temperature and forging force. But the pouring temperature had a more significant effect on hardness as compared to injection speed, die temperature and forging force. Pouring temperature of 675 ＆#176;C, injection speed of 2.7 m/s and forging force of 4000 kN except for die temperature were the optimal parameters for obtaining the highest YS, UTS, elongation and Vickers hardness. Die temperatures of 205, 195, 195 and 225 ＆#176;C were involved in achieving the highest YS, UTS, elongation and Vickers hardness, respectively. Obvious microporosity and microcracks were found on the fracture surface of the components formed by DC, deteriorating the mechanical properties. However, the tensile fracture morphology of the components formed by DCF was characterized by ductile fracture due to a large number of dimples and no defects, which was beneficial for improving the mechanical properties.
文摘Seven new alkylenedibiguanides were synthesized and comfirmed by 1H NMR, MS and elemental analyses. The preliminary test in vitro showed that some of them had potential antibacterial activities.
