具有双螺旋齿面的直锥齿轮冷摆辗成形过程的数值模拟与试验研究

为了获得高质量、高精度的直锥齿轮精密锻件,对具有双螺旋面齿形的直锥齿轮冷摆辗成形工艺进行了Deform-3D数值模拟分析和工艺试验研究。首先借助于Deform-3D有限元模拟分析软件对直锥齿轮冷摆辗成形过程进行数值模拟,分析其齿形的充填规律,获得在冷摆辗成形过程中齿轮内部的应力、应变分布规律;并在此基础上,制定了合理的冷摆辗成形工艺过程,确定了合适的坯料形状尺寸以及成形工艺参数。工艺试验结果表明,采用该冷摆辗成形工艺得到了齿面表面质量高、齿形精度高、加工余量小、无裂纹和折叠、充填饱满的高质量双螺旋齿面直锥齿轮锻件。

Tooth surface geometry optimization of spiral bevel and hypoid gears generated by duplex helical method with circular profile blade

In order to effectively improve meshing performance of spiral bevel and hypoid gears generated by the duplex helical method, the effects of straight lined and circular cutting edges profile on meshing and contact of spiral bevel and hypoid gears were investigated analytically. Firstly, a mathematical model of spiral bevel and hypoid gears with circular blade profile was established according to the cutting characteristics of the duplex helical method. Based on a hypoid gear drive, the tooth bearings and the functions of transmission errors of four design cases were analyzed respectively by the use of the tooth contact analysis(TCA), and the contact stresses of the four design cases were analyzed and compared using simulation software. Finally, the curvature radius of the circular profile blade was optimized. The results show that the contact stresses are availably reduced, and the areas of edge contact and severe contact stresses can be avoided by selecting appropriate circular blade profile. In addition, the convex and concave sides are separately modified by the use of different curvature radii of inside and outside blades, which can increase the flexibility of the duplex helical method.

Tooth surface error correction of hypoid gears machined by duplex helical method

In this work,synchronous cutting of concave and convex surfaces was achieved using the duplex helical method for the hypoid gear,and the problem of tooth surface error correction was studied.First,the mathematical model of the hypoid gears machined by the duplex helical method was established.Second,the coordinates of discrete points on the tooth surface were obtained by measurement center,and the normal errors of the discrete points were calculated.Third,a tooth surface error correction model is established,and the tooth surface error was corrected using the Levenberg-Marquard algorithm with trust region strategy and least square method.Finally,grinding experiments were carried out on the machining parameters obtained by Levenberg-Marquard algorithm with trust region strategy,which had a better effect on tooth surface error correction than the least square method.After the tooth surface error is corrected,the maximum absolute error is reduced from 30.9μm before correction to 6.8μm,the root mean square of the concave error is reduced from 15.1 to 2.1μm,the root mean square of the convex error is reduced from 10.8 to 1.8μm,and the sum of squared errors of the concave and convex surfaces was reduced from 15471 to 358μm^(2).It is verified that the Levenberg-Marquard algorithm with trust region strategy has a good accuracy for the tooth surface error correction of hypoid gear machined by duplex helical method.

Virtual System Solution of CNC Machine for Spiral Bevel and Hypoid Gears

A virtual computerized numerical control C CNC） processing system is built for spiral bevel and hypoid gears. The pre-designed process of the solution to locate the way of realization is investigated. A kind of combined programming method and principle of solid modeling are chosen. Multienvironmental programming thought and the inter-connected mechanisms between different environments are applied in the proposed system. The problems of data exchange and compatibility of modules are settled. Environment of the system is founded with object oriented programming thought. AutoCAD is located as the graphic environment. Matlab is used for editing the computation module. Virtual C ＋＋6.0 is the realization environment of the main module. Windows is the platform for realizing the multi-environmental method. Through establishing the virtual system based windows message handling mechanism and the component object model, the application of multienvironmental programming is realized in the manufacture system simulation. The virtual gear product can be achieved in the accomplished software.

NC Machining of Spiral Bevel Gear and Hypoid Gear Based on Unity Transformation Model

A unity transformation model (UTM) was presented for flexible NC machining of spiral bevel gears and hypoid gears. The model can support various machining methods for Gleason spiral bevel gears and hypoid gears, including generation machining and formation machining for wheel or pinion on a universal five-axis machining center, and then directly produce NC codes for the selected machining method. Wheel machining and pinion machining under UTM were simulated in Vericut 6.0 and tested on a five-axis machining center TDNC-W2000 with NC unit TDNC-H8. The results from simulation and real-cut verify the feasibility of gear machining under UTM as well as the correctness of NC codes.