The three-phase bridge inverter is used as the converter topology in the power controller for a 9 kW doubly salient permanent magnet （DSPM） motor. Compared with common three-phase bridge inverters, the proposed inve...The three-phase bridge inverter is used as the converter topology in the power controller for a 9 kW doubly salient permanent magnet （DSPM） motor. Compared with common three-phase bridge inverters, the proposed inverter works under more complicated conditions with different principles for special winding back EMFs, position signals of hall sensors, and the given mode of switches. The ideal steady driving principles of the inverter for the motor are given. The working state with asymmetric winding back EMFs, inaccurate position signals of hall sensors, and the changing input voltage is analyzed. Finally, experimental results vertify that the given anal ysis is correct.展开更多
In order to enhance the accuracy and reliability of wireless location under non-line-of-sight （NLOS） environments,a novel neural network （NN） location approach using the digital broadcasting signals is presented. ...In order to enhance the accuracy and reliability of wireless location under non-line-of-sight （NLOS） environments,a novel neural network （NN） location approach using the digital broadcasting signals is presented. By the learning ability of the NN and the closely approximate unknown function to any degree of desired accuracy,the input-output mapping relationship between coordinates and the measurement data of time of arrival （TOA） and time difference of arrival （TDOA） is established. A real-time learning algorithm based on the extended Kalman filter （EKF） is used to train the multilayer perceptron （MLP） network by treating the linkweights of a network as the states of the nonlinear dynamic system. Since the EKF-based learning algorithm approximately gives the minimum variance estimate of the linkweights,the convergence is improved in comparison with the backwards error propagation （BP） algorithm. Numerical results illustrate thatthe proposedalgorithmcanachieve enhanced accuracy,and the performance ofthe algorithmis betterthanthat of the BP-based NN algorithm and the least squares （LS） algorithm in the NLOS environments. Moreover,this location method does not depend on a particular distribution of the NLOS error and does not need line-of-sight （ LOS ） or NLOS identification.展开更多
The MoOx/AuNPs composite film modified glassy carbon electrode was fabricated by electro-depositing simultaneously gold nanoparticles and molybdenum oxides using cyclic voltammetry. The morphology and topography of th...The MoOx/AuNPs composite film modified glassy carbon electrode was fabricated by electro-depositing simultaneously gold nanoparticles and molybdenum oxides using cyclic voltammetry. The morphology and topography of the MoOx/AuNPs composite were char-acterized by scan electron microscopy and X-ray photoelectron spectroscopy respectively, and the electrocatalytic oxidation of glucose at the MoOx/AuNPs composite film was inves-tigated and analyzed in detail. It was shown that the MoOx/AuNPs composite was of strong electrocatalytic activity towards oxidation of glucose as well as other saccharides, so that an attempt was made for direct voltammetric determination of glucose. Then the positive scan polarization reverse catalytic voltammetry was proposed for the first time. Based on this method, the pure oxidation current was extracted by subtraction of the blank current in the reverse scan. The current sensitivity was enhanced tremendously and the signal to noise ra-tio was improved adequately. The electrocatalytic oxidation of glucose at the MoOx/AuNPs modified electrode was performed in alkaline medium, a wide linear range from 0.01 mmol/L to 4.0 mmol/L of glucose, a higher current sensitivity of 2.35 mA/（mmol/L·cm2）, and a lower limit of detection of 9.01 μmol/L （at signal/noise=3） were achieved. In addition, the electrocatalytic oxidation of other saccharides such as lactose, fructose and sucrose was also evaluated.展开更多
In order to start up the brushless DC motor （BLDCM） without reverse rotation and smoothly switch the running state of the motor, a novel startup and smoothly switching method for a sensodess BLDCM is presented. Base...In order to start up the brushless DC motor （BLDCM） without reverse rotation and smoothly switch the running state of the motor, a novel startup and smoothly switching method for a sensodess BLDCM is presented. Based on the saturation effect of the stator iron, six short voltage pulses are applied to determine the initial rotor position and the rotor can be found within 60°. After that, a series of short and long voltage pulses are used to accelerate the motor and the variation of the response current is utilized to detect the rotor position dynamically. When the motor reaches a certain speed at which the back-electromotive force （EMF） method can be applied, all the power devices are turned off and the running state of the motor is smoothly switched at the moment determined by the relationship between the terminal voltage waveform and the commutation phases. The experimental results verify the feasibility and validity of the proposed method.展开更多
Pressure fluctuation in the submerged circulative impinging stream reactor （SCISR） is studied by measuring the dynamic pressure with micro pressure sensors of high accuracy, with water as the process material. Exper...Pressure fluctuation in the submerged circulative impinging stream reactor （SCISR） is studied by measuring the dynamic pressure with micro pressure sensors of high accuracy, with water as the process material. Experimental results show that the maximum amplitude of fluctuation can be up to about 1.6kPa. On the power spectra the fluctuation is relatively concentrated in the range of 〈1000Hz, with some weak peeks in acoustic wave range. The space profile of intensive fluctuation region in the reactor is determined. The region is found to take the form of a couple truncated cones of empty core, with coincided bottoms, and is symmetrical with respect to the impinging plane and approximately symmetrical about the axis, essentially independent of u0. The integral intensity of fluctuation increases as the impinging velocity, Uo increasing.展开更多
Based on the Stokes signals of the spontaneous Raman backscattering,a demodulated method for the simultaneous distributed temperature measurement in an optical fiber is presented to improve the sensitivity of the sens...Based on the Stokes signals of the spontaneous Raman backscattering,a demodulated method for the simultaneous distributed temperature measurement in an optical fiber is presented to improve the sensitivity of the sensor.The experimental system of Stokes temperature sensor is set up and 2 km of operating length,1 m of distance resolution ,accuracy of ±0.1℃ are obtained.展开更多
A piezoelectric sensor charge/voltage conversion circuit is designed based on the principle that piezoelectric sensor can convert the vibration or shock acceleration into the charge proportionally.Effect of temperatur...A piezoelectric sensor charge/voltage conversion circuit is designed based on the principle that piezoelectric sensor can convert the vibration or shock acceleration into the charge proportionally.Effect of temperature characteristic of feedback capacitor on the switching circuit output is analyzed based on the acquisition and measurement system in this paper.The characteristics of different filters are analyzed,and the corresponding filter circuit is configured according to the actual sensor bandwidth.Experiments show that the circuit can effectively filter out noises among the vibration signal and obtain vibration signal accurately.展开更多
Inter-phase mass transfer is important to the design and performance of airlift loop reactors for either chemical or biochemical applications, and a good measurement technique is crucial for studying mass transfer in ...Inter-phase mass transfer is important to the design and performance of airlift loop reactors for either chemical or biochemical applications, and a good measurement technique is crucial for studying mass transfer in multiphase systems. According to the model of macro-scale mass transfer in airlift loop reactors, it was proved that the airlift loop reactor can be regarded as a continuous stirred tank reactor for measuring mass transfer coefficient. The calculated mass transfer coefficient on such a basis is different from the volumetric mass transfer coefficient in the macro-scale model and the difference is discussed. To describe the time delay of the probe response to the change of oxygen concentration in the liquid phase, a model taking into account the time constant of response is es-tablished. Sensitivity analysis shows that this model can be used to measure the volumetric mass transfer coefficient. Applying this model to the measurement of volumetric mass transfer coefficient in the loop reactor, results that co-incide with the turbulence theory in the literate were obtained.展开更多
A novel system configuration of fiber optic sensor based on optical abso rption is proposed. Several compensation measures are discussed. A simulated exp eriment is designed and the output curve of system is given. Th...A novel system configuration of fiber optic sensor based on optical abso rption is proposed. Several compensation measures are discussed. A simulated exp eriment is designed and the output curve of system is given. The experiment al result shows that these compensation measures are effective on dynamic distu rbances which are caused by background light and optical fiber bend. In addition , the drifts in the light source intensity, fiber losses, and photodetector effi ciency are also compensated.展开更多
A practical optical fiber differential pressure sensor is presented at first. Then the techniques of light source feedback, set up of reference channel, proportional measurement and other methods to improve the stabil...A practical optical fiber differential pressure sensor is presented at first. Then the techniques of light source feedback, set up of reference channel, proportional measurement and other methods to improve the stability of the system as well as to reduce the interference with same nature are emphatically discussed. Finally, the experiment results of the developed instrument are given.展开更多
A distributed feedback fiber laser based Bragg grating vibration sensor system is proposed.Demodulated by using an unbalanced M-Z interferometer,experiment demonstrates that the system runs at a sensing sensitivity of...A distributed feedback fiber laser based Bragg grating vibration sensor system is proposed.Demodulated by using an unbalanced M-Z interferometer,experiment demonstrates that the system runs at a sensing sensitivity of about 257.2 rad·s2/m and a resolution of 4.2×10-5 m/s2 for monitoring acceleration.Experimental results show that the phase-shift changes with the acceleration linearly.展开更多
Ion-sensitive field-effect transistor （ISFET）-based biosensor for amino acids was proposed, and the response of the sensor to amino acids was evaluated. As a molecular recognition element, aminoacyl-tRNA synthetase ...Ion-sensitive field-effect transistor （ISFET）-based biosensor for amino acids was proposed, and the response of the sensor to amino acids was evaluated. As a molecular recognition element, aminoacyl-tRNA synthetase which would be expected to have high selectivity for the corresponding amino acids was used, aminoacyl-tRNA synthetase was coated onto an ISFET electrode, and the response of the biosensor to amino acids was evaluated. The amino acid sensor for tyrosine showed a selective response to tyrosine because of the specific binding ability of aminoacyl-tRNA synthetase for tyrosine and from 300μM to 900 μM of tyrosine could be measured （r2 〉 0.969）.展开更多
The key of speed sensorless vector control system lies in the accurate orientation of magnetic field. In some field-oriented algorithms, the integrator of observers and the dead-time effect bring in system errors duri...The key of speed sensorless vector control system lies in the accurate orientation of magnetic field. In some field-oriented algorithms, the integrator of observers and the dead-time effect bring in system errors during the estimation of field position. In this paper, a saturated feedback integrator is used, and the dead-time effect is compen- sated by current positive feedback. Experiments were carried out on the hardware platform of MCK2407, with chip TMS320LF2407 from TI Company. The results show that the prooosed method is simole and effective, and the accuracy of field position is improved.展开更多
文摘The three-phase bridge inverter is used as the converter topology in the power controller for a 9 kW doubly salient permanent magnet （DSPM） motor. Compared with common three-phase bridge inverters, the proposed inverter works under more complicated conditions with different principles for special winding back EMFs, position signals of hall sensors, and the given mode of switches. The ideal steady driving principles of the inverter for the motor are given. The working state with asymmetric winding back EMFs, inaccurate position signals of hall sensors, and the changing input voltage is analyzed. Finally, experimental results vertify that the given anal ysis is correct.
基金The National High Technology Research and Development Program of China (863 Program) (No.2008AA01Z227)the Cultivatable Fund of the Key Scientific and Technical Innovation Project of Ministry of Education of China (No.706028)
文摘In order to enhance the accuracy and reliability of wireless location under non-line-of-sight （NLOS） environments,a novel neural network （NN） location approach using the digital broadcasting signals is presented. By the learning ability of the NN and the closely approximate unknown function to any degree of desired accuracy,the input-output mapping relationship between coordinates and the measurement data of time of arrival （TOA） and time difference of arrival （TDOA） is established. A real-time learning algorithm based on the extended Kalman filter （EKF） is used to train the multilayer perceptron （MLP） network by treating the linkweights of a network as the states of the nonlinear dynamic system. Since the EKF-based learning algorithm approximately gives the minimum variance estimate of the linkweights,the convergence is improved in comparison with the backwards error propagation （BP） algorithm. Numerical results illustrate thatthe proposedalgorithmcanachieve enhanced accuracy,and the performance ofthe algorithmis betterthanthat of the BP-based NN algorithm and the least squares （LS） algorithm in the NLOS environments. Moreover,this location method does not depend on a particular distribution of the NLOS error and does not need line-of-sight （ LOS ） or NLOS identification.
文摘The MoOx/AuNPs composite film modified glassy carbon electrode was fabricated by electro-depositing simultaneously gold nanoparticles and molybdenum oxides using cyclic voltammetry. The morphology and topography of the MoOx/AuNPs composite were char-acterized by scan electron microscopy and X-ray photoelectron spectroscopy respectively, and the electrocatalytic oxidation of glucose at the MoOx/AuNPs composite film was inves-tigated and analyzed in detail. It was shown that the MoOx/AuNPs composite was of strong electrocatalytic activity towards oxidation of glucose as well as other saccharides, so that an attempt was made for direct voltammetric determination of glucose. Then the positive scan polarization reverse catalytic voltammetry was proposed for the first time. Based on this method, the pure oxidation current was extracted by subtraction of the blank current in the reverse scan. The current sensitivity was enhanced tremendously and the signal to noise ra-tio was improved adequately. The electrocatalytic oxidation of glucose at the MoOx/AuNPs modified electrode was performed in alkaline medium, a wide linear range from 0.01 mmol/L to 4.0 mmol/L of glucose, a higher current sensitivity of 2.35 mA/（mmol/L·cm2）, and a lower limit of detection of 9.01 μmol/L （at signal/noise=3） were achieved. In addition, the electrocatalytic oxidation of other saccharides such as lactose, fructose and sucrose was also evaluated.
文摘In order to start up the brushless DC motor （BLDCM） without reverse rotation and smoothly switch the running state of the motor, a novel startup and smoothly switching method for a sensodess BLDCM is presented. Based on the saturation effect of the stator iron, six short voltage pulses are applied to determine the initial rotor position and the rotor can be found within 60°. After that, a series of short and long voltage pulses are used to accelerate the motor and the variation of the response current is utilized to detect the rotor position dynamically. When the motor reaches a certain speed at which the back-electromotive force （EMF） method can be applied, all the power devices are turned off and the running state of the motor is smoothly switched at the moment determined by the relationship between the terminal voltage waveform and the commutation phases. The experimental results verify the feasibility and validity of the proposed method.
基金the National Natural Science Foundation of China （No.29276260, No.20176043）.ACKN0WLEDGEMENT The authors would like to thank Dr. Zhang Jian- wei who worked a lot in preparation of the apparatus for pressure fluctuation measurements.
文摘Pressure fluctuation in the submerged circulative impinging stream reactor （SCISR） is studied by measuring the dynamic pressure with micro pressure sensors of high accuracy, with water as the process material. Experimental results show that the maximum amplitude of fluctuation can be up to about 1.6kPa. On the power spectra the fluctuation is relatively concentrated in the range of 〈1000Hz, with some weak peeks in acoustic wave range. The space profile of intensive fluctuation region in the reactor is determined. The region is found to take the form of a couple truncated cones of empty core, with coincided bottoms, and is symmetrical with respect to the impinging plane and approximately symmetrical about the axis, essentially independent of u0. The integral intensity of fluctuation increases as the impinging velocity, Uo increasing.
文摘Based on the Stokes signals of the spontaneous Raman backscattering,a demodulated method for the simultaneous distributed temperature measurement in an optical fiber is presented to improve the sensitivity of the sensor.The experimental system of Stokes temperature sensor is set up and 2 km of operating length,1 m of distance resolution ,accuracy of ±0.1℃ are obtained.
文摘A piezoelectric sensor charge/voltage conversion circuit is designed based on the principle that piezoelectric sensor can convert the vibration or shock acceleration into the charge proportionally.Effect of temperature characteristic of feedback capacitor on the switching circuit output is analyzed based on the acquisition and measurement system in this paper.The characteristics of different filters are analyzed,and the corresponding filter circuit is configured according to the actual sensor bandwidth.Experiments show that the circuit can effectively filter out noises among the vibration signal and obtain vibration signal accurately.
基金Supported by the Specialized Research Fund for the Program of Higher Education (No.20050003030) and byTsinghua-Zhongda Postdoctoral Fellowship Program (No.20283600131).
文摘Inter-phase mass transfer is important to the design and performance of airlift loop reactors for either chemical or biochemical applications, and a good measurement technique is crucial for studying mass transfer in multiphase systems. According to the model of macro-scale mass transfer in airlift loop reactors, it was proved that the airlift loop reactor can be regarded as a continuous stirred tank reactor for measuring mass transfer coefficient. The calculated mass transfer coefficient on such a basis is different from the volumetric mass transfer coefficient in the macro-scale model and the difference is discussed. To describe the time delay of the probe response to the change of oxygen concentration in the liquid phase, a model taking into account the time constant of response is es-tablished. Sensitivity analysis shows that this model can be used to measure the volumetric mass transfer coefficient. Applying this model to the measurement of volumetric mass transfer coefficient in the loop reactor, results that co-incide with the turbulence theory in the literate were obtained.
文摘A novel system configuration of fiber optic sensor based on optical abso rption is proposed. Several compensation measures are discussed. A simulated exp eriment is designed and the output curve of system is given. The experiment al result shows that these compensation measures are effective on dynamic distu rbances which are caused by background light and optical fiber bend. In addition , the drifts in the light source intensity, fiber losses, and photodetector effi ciency are also compensated.
文摘A practical optical fiber differential pressure sensor is presented at first. Then the techniques of light source feedback, set up of reference channel, proportional measurement and other methods to improve the stability of the system as well as to reduce the interference with same nature are emphatically discussed. Finally, the experiment results of the developed instrument are given.
基金supported by the Science Fund for Young Scholars of Heilongjiang University,China(No.QL200901)
文摘A distributed feedback fiber laser based Bragg grating vibration sensor system is proposed.Demodulated by using an unbalanced M-Z interferometer,experiment demonstrates that the system runs at a sensing sensitivity of about 257.2 rad·s2/m and a resolution of 4.2×10-5 m/s2 for monitoring acceleration.Experimental results show that the phase-shift changes with the acceleration linearly.
文摘Ion-sensitive field-effect transistor （ISFET）-based biosensor for amino acids was proposed, and the response of the sensor to amino acids was evaluated. As a molecular recognition element, aminoacyl-tRNA synthetase which would be expected to have high selectivity for the corresponding amino acids was used, aminoacyl-tRNA synthetase was coated onto an ISFET electrode, and the response of the biosensor to amino acids was evaluated. The amino acid sensor for tyrosine showed a selective response to tyrosine because of the specific binding ability of aminoacyl-tRNA synthetase for tyrosine and from 300μM to 900 μM of tyrosine could be measured （r2 〉 0.969）.
文摘The key of speed sensorless vector control system lies in the accurate orientation of magnetic field. In some field-oriented algorithms, the integrator of observers and the dead-time effect bring in system errors during the estimation of field position. In this paper, a saturated feedback integrator is used, and the dead-time effect is compen- sated by current positive feedback. Experiments were carried out on the hardware platform of MCK2407, with chip TMS320LF2407 from TI Company. The results show that the prooosed method is simole and effective, and the accuracy of field position is improved.
