Multi-component exploration has many advantages over ordinary P-wave exploration. PP/PS joint AVO analysis and inversion are useful and powerful methods to discriminate between reservoir and non-productive lithology. ...Multi-component exploration has many advantages over ordinary P-wave exploration. PP/PS joint AVO analysis and inversion are useful and powerful methods to discriminate between reservoir and non-productive lithology. In this paper, we derive a new PS-wave reflection coefficient approximation equation which is more accurate at larger incidence angles. The equation is simplified for small incidence angles, which makes AVO analysis clearer and easier for angles less than 30 degrees. Based on this approximation, a PP/PS joint inversion is introduced. A real data example shows that oil sands, brine sands and shales can be differentiated based on the P- to S-wave velocity ratio from the PP/PS joint inversion. Fluid factors and Poisson＇s ratio also indicate an anomaly in the target zone at the oil well location.展开更多
Reflection full-waveform inversion （RFWI） updates the low- and high- wavenumber components, and yields more accurate initial models compared with conventional full-waveform inversion （FWI）. However, there is stron...Reflection full-waveform inversion （RFWI） updates the low- and high- wavenumber components, and yields more accurate initial models compared with conventional full-waveform inversion （FWI）. However, there is strong nonlinearity in conventional RFWI because of the lack of low-frequency data and the complexity of the amplitude. The separation of phase and amplitude information makes RFWI more linear. Traditional phase-calculation methods face severe phase wrapping. To solve this problem, we propose a modified phase-calculation method that uses the phase-envelope data to obtain the pseudo phase information. Then, we establish a pseudophase-information-based objective function for RFWI, with the corresponding source and gradient terms. Numerical tests verify that the proposed calculation method using the phase-envelope data guarantees the stability and accuracy of the phase information and the convergence of the objective function. The application on a portion of the Sigsbee2A model and comparison with inversion results of the improved RFWI and conventional FWI methods verify that the pseudophase-based RFWI produces a highly accurate and efficient velocity model. Moreover, the proposed method is robust to noise and high frequency.展开更多
Because of the combination of optimization algorithms and full wave equations, full-waveform inversion(FWI) has become the frontier of the study of seismic exploration and is gradually becoming one of the essential to...Because of the combination of optimization algorithms and full wave equations, full-waveform inversion(FWI) has become the frontier of the study of seismic exploration and is gradually becoming one of the essential tools for obtaining the Earth interior information. However, the application of conventional FWI to pure reflection data in the absence of a highly accurate starting velocity model is difficult. Compared to other types of seismic waves, reflections carry the information of the deep part of the subsurface. Reflection FWI, therefore, is able to improve the accuracy of imaging the Earth interior further. Here, we demonstrate a means of achieving this successfully by interleaving least-squares RTM with a version of reflection FWI in which the tomographic gradient that is required to update the background macro-model is separated from the reflectivity gradient using the Born approximation during forward modeling. This provides a good update to the macro-model. This approach is then followed by conventional FWI to obtain a final high-fidelity high-resolution result from a poor starting model using only reflection data.Further analysis reveals the high-resolution result is achieved due to a deconvolution imaging condition implicitly used by FWI.展开更多
Through solving the Zoeppritz's partial derivative equations, we have obtained accurate partial derivatives of reflected coefficients of seismic wave with respect to Pand S-wave velocities.With those partial deriv...Through solving the Zoeppritz's partial derivative equations, we have obtained accurate partial derivatives of reflected coefficients of seismic wave with respect to Pand S-wave velocities.With those partial derivatives, a multi-angle inversion is developed for seismic wave velocities.Numerical examples of different formation models show that if the number of iterations goes over 10, the relative error of inversion results is less than 1%, whether or not there is interference among the reflection waves.When we only have the reflected seismograms of P-wave, and only invert for velocities of P-wave, the multi-angle inversion is able to obtain a high computation precision.When we have the reflected seismograms of both P-wave and VS-wave, and simultaneously invert for the velocities of P-wave and VS-wave, the computation precisions of VS-wave velocities improves gradually with the increase of the number of angles, but the computation precision of P-wave velocities becomes worse.No matter whether the reflected seismic waves from the different reflection interface are coherent or non-coherent, this method is able to achieve a higher computation precision.Because it is based on the accurate solution of the gradient of SWRCs without any additional restriction, the multi-angle inversion method can be applied to seismic inversion of total angles.By removing the difficulties caused by simplified Zoeppritz formulas that the conventional AVO technology struggles with, the multiangle inversion method extended the application range of AVO technology and improved the computation precision and speed of inversion of seismic wave velocities.展开更多
基金supported by the Natural Science Foundation of China (Grant Nos 40974066 and 40821062)the National Basic Research Program of China (Grant No. 2007CB209602)
文摘Multi-component exploration has many advantages over ordinary P-wave exploration. PP/PS joint AVO analysis and inversion are useful and powerful methods to discriminate between reservoir and non-productive lithology. In this paper, we derive a new PS-wave reflection coefficient approximation equation which is more accurate at larger incidence angles. The equation is simplified for small incidence angles, which makes AVO analysis clearer and easier for angles less than 30 degrees. Based on this approximation, a PP/PS joint inversion is introduced. A real data example shows that oil sands, brine sands and shales can be differentiated based on the P- to S-wave velocity ratio from the PP/PS joint inversion. Fluid factors and Poisson＇s ratio also indicate an anomaly in the target zone at the oil well location.
基金jointly supported by the NSF(Nos.41104069 and 41274124)the National 973 Project(No.2014CB239006)+1 种基金National Oil and Gas Project(Nos.2016ZX05014001and 2016ZX05002)the Tai Shan Science Foundation for The Excellent Youth Scholars
文摘Reflection full-waveform inversion （RFWI） updates the low- and high- wavenumber components, and yields more accurate initial models compared with conventional full-waveform inversion （FWI）. However, there is strong nonlinearity in conventional RFWI because of the lack of low-frequency data and the complexity of the amplitude. The separation of phase and amplitude information makes RFWI more linear. Traditional phase-calculation methods face severe phase wrapping. To solve this problem, we propose a modified phase-calculation method that uses the phase-envelope data to obtain the pseudo phase information. Then, we establish a pseudophase-information-based objective function for RFWI, with the corresponding source and gradient terms. Numerical tests verify that the proposed calculation method using the phase-envelope data guarantees the stability and accuracy of the phase information and the convergence of the objective function. The application on a portion of the Sigsbee2A model and comparison with inversion results of the improved RFWI and conventional FWI methods verify that the pseudophase-based RFWI produces a highly accurate and efficient velocity model. Moreover, the proposed method is robust to noise and high frequency.
基金supported by the National Natural Science Foundation of China(Grant No.41504106&41274099)the Science Foundation of China University of Petroleum(Beijing)(Grant No.2462015YJRC012)State Laboratory of Petroleum Resource and Prospecting(Grant No.PRP/indep-3-1508)
文摘Because of the combination of optimization algorithms and full wave equations, full-waveform inversion(FWI) has become the frontier of the study of seismic exploration and is gradually becoming one of the essential tools for obtaining the Earth interior information. However, the application of conventional FWI to pure reflection data in the absence of a highly accurate starting velocity model is difficult. Compared to other types of seismic waves, reflections carry the information of the deep part of the subsurface. Reflection FWI, therefore, is able to improve the accuracy of imaging the Earth interior further. Here, we demonstrate a means of achieving this successfully by interleaving least-squares RTM with a version of reflection FWI in which the tomographic gradient that is required to update the background macro-model is separated from the reflectivity gradient using the Born approximation during forward modeling. This provides a good update to the macro-model. This approach is then followed by conventional FWI to obtain a final high-fidelity high-resolution result from a poor starting model using only reflection data.Further analysis reveals the high-resolution result is achieved due to a deconvolution imaging condition implicitly used by FWI.
基金supported by Funding Project for Academic Human Resources Development in Institutions of Higher Learning Under the Jurisdiction of Beijing Municipality(PHR(IHLB))(Grant No.PHR201107145)
文摘Through solving the Zoeppritz's partial derivative equations, we have obtained accurate partial derivatives of reflected coefficients of seismic wave with respect to Pand S-wave velocities.With those partial derivatives, a multi-angle inversion is developed for seismic wave velocities.Numerical examples of different formation models show that if the number of iterations goes over 10, the relative error of inversion results is less than 1%, whether or not there is interference among the reflection waves.When we only have the reflected seismograms of P-wave, and only invert for velocities of P-wave, the multi-angle inversion is able to obtain a high computation precision.When we have the reflected seismograms of both P-wave and VS-wave, and simultaneously invert for the velocities of P-wave and VS-wave, the computation precisions of VS-wave velocities improves gradually with the increase of the number of angles, but the computation precision of P-wave velocities becomes worse.No matter whether the reflected seismic waves from the different reflection interface are coherent or non-coherent, this method is able to achieve a higher computation precision.Because it is based on the accurate solution of the gradient of SWRCs without any additional restriction, the multi-angle inversion method can be applied to seismic inversion of total angles.By removing the difficulties caused by simplified Zoeppritz formulas that the conventional AVO technology struggles with, the multiangle inversion method extended the application range of AVO technology and improved the computation precision and speed of inversion of seismic wave velocities.
