目的:研究氢火焰气相色谱仪(GC112A)内标法测定反式脂肪酸的实验室最佳条件。方法:采用气相色谱内标-标准曲线法,通过测定反式脂肪酸标准品工作液的标准曲线、重现性和分离度来确定和验证GC112A的最佳色谱条件。结果:实验室最佳色谱条件...目的:研究氢火焰气相色谱仪(GC112A)内标法测定反式脂肪酸的实验室最佳条件。方法:采用气相色谱内标-标准曲线法,通过测定反式脂肪酸标准品工作液的标准曲线、重现性和分离度来确定和验证GC112A的最佳色谱条件。结果:实验室最佳色谱条件:毛细管柱,PC-88(100 m×0.25 mm×0.2μm);进样口温度:260℃;载气:高纯N2,压力220 k Pa,流速41.0 m L/min;检测器(FID)温度:290℃,氢气压力100 k Pa,流速21.0 m L/min;空气压力160 k Pa,流速215.0 m L/min;检测器(FID)灵敏度:1010;手动进样,进样量:1.0μL。结论:该方法避免了外标法(国标方法)的国产仪器局限性和操作者人工进样的不确定性,具有受仪器参数变化的影响较小的特点,适合在基层食品检验机构推广。展开更多
C4 components are useful in industry and should be separated as individuals. A new process was proposed to separate them by extractive distillation, with the advantages of low equipment investment, energy consumption...C4 components are useful in industry and should be separated as individuals. A new process was proposed to separate them by extractive distillation, with the advantages of low equipment investment, energy consumption and liquid load in the columns. One principle to improve the extractive distillation process was put forward. Moreover, the analysis of operation state of the new process was done. There were eight operation states found for the whole process, but only one operation state was desirable. This work provides a way to effectively separate C4 mixtures and helps the reasonable utilization of C4 resource.展开更多
文摘目的:研究氢火焰气相色谱仪(GC112A)内标法测定反式脂肪酸的实验室最佳条件。方法:采用气相色谱内标-标准曲线法,通过测定反式脂肪酸标准品工作液的标准曲线、重现性和分离度来确定和验证GC112A的最佳色谱条件。结果:实验室最佳色谱条件:毛细管柱,PC-88(100 m×0.25 mm×0.2μm);进样口温度:260℃;载气:高纯N2,压力220 k Pa,流速41.0 m L/min;检测器(FID)温度:290℃,氢气压力100 k Pa,流速21.0 m L/min;空气压力160 k Pa,流速215.0 m L/min;检测器(FID)灵敏度:1010;手动进样,进样量:1.0μL。结论:该方法避免了外标法(国标方法)的国产仪器局限性和操作者人工进样的不确定性,具有受仪器参数变化的影响较小的特点,适合在基层食品检验机构推广。
文摘C4 components are useful in industry and should be separated as individuals. A new process was proposed to separate them by extractive distillation, with the advantages of low equipment investment, energy consumption and liquid load in the columns. One principle to improve the extractive distillation process was put forward. Moreover, the analysis of operation state of the new process was done. There were eight operation states found for the whole process, but only one operation state was desirable. This work provides a way to effectively separate C4 mixtures and helps the reasonable utilization of C4 resource.
