双面电脑提花机多色提花面料的设计开发

为进行双面多色提花面料的设计,分析提花工艺正面花型设计的原则、图案类型和花型尺寸等,以及2色、3色、多色提花工艺反面设计方法和正、反面花型配合设计。同时提出双面多色提花面料的设计要点,包括正、反面线圈高度比,色纱数与花型尺寸关系,牵拉张力等。并采用6种颜色的11.11 tex涤纶低弹丝,在22针/25.4 mm的双面电脑提花机上开发6色提花奥运福娃织物,详细阐述该织物的设计与开发流程,包括设备参数、原料选择、花型设计、工艺设计、上机设计等,为双面电脑提花机多色提花面料的开发提供参考。

Radar Cross Section Prediction and Reduction for Naval Ships

Radar cross section（RCS） is the measurement of the reflective strength of a target.Reducing the RCS of a naval ship enables its late detection,which is useful for capitalizing on elements of surprise and initiative.Thus,the RCS of a naval ship has become a very important design factor for achieving surprise,initiative,and survivability.Consequently,accurate RCS determination and RCS reduction are of extreme importance for a naval ship.The purpose of this paper is to provide an understanding of the theoretical background and engineering approach to deal with RCS prediction and reduction for naval ships.The importance of RCS,radar fundamentals,RCS basics,RCS prediction methods,and RCS reduction methods for naval ships is also discussed.

Shrek:a dynamic object-oriented programming language

From a perspective of theoretical study, there are some faults in the models of the existing object-oriented programming languages. For example, C# does not support metaclasses, the primitive types of Java and C# are not objects, etc. So, this paper designs a programming language, Shrek, which integrates many language features and constructions in a compact and consistent model. The Shrek language is a class-based purely object-oriented language. It has a dynamical strong type system, and adopts a single-inheritance mechanism with Mixin as its complement. It has a consistent class instantiation and inheritance structure, and the ability of intercessive structural computational reflection, which enables it to support safe metaclass programming. It also supports multi-thread programming and automatic garbage collection, and enforces its expressive power by adopting a native method mechanism. The prototype system of the Shrek language is implemented and anticipated design goals are achieved.

Influence of medium components on elastase production using crude sources by Bacillus sp.EL31410

A newly isolated strain EL31410, producing elastase (E.C3.4.4.7) with h igh elastolytic activity was identified as Bacillus sp. In the medium opt imizat ion, it was found that wheat bran and soybean flour hydrosate were the best crud e carbon and nitrogen source for enzyme production, respectively. Addition of co rn steep flour can affect the bacterium growth and elastase production. A fracti onal factorial design was applied to study the main factors that affect the enzy me production, and central composite experimental design and response surface me thodology were adopted to derive a statistical model for the effect of wheat bra n and soybean flour hydrosate on elastase production. The experimental results s howed that wheat bran had positive effect but soybean flour hydrosate had neg ative effect, on enzyme production. An initial concentration of 3.4%(w/v) wh eat b ran and 9.4%(v/v) soybean flour hydrosate were found to be optimal for enzyme pr oduction in batch culture. The time course of elastase production in the optimiz ed medium composition was also described.

Vertical-to-horizontal response spectral ratio for offshore ground motions:Analysis and simplified design equation

In order to study the differences in vertical component between onshore and offshore motions,the vertical-to-horizontal peak ground acceleration ratio(V/H PGA ratio) and vertical-to-horizontal response spectral ratio(V/H) were investigated using the ground motion recordings from the K-NET network and the seafloor earthquake measuring system(SEMS).The results indicate that the vertical component of offshore motions is lower than that of onshore motions.The V/H PGA ratio of acceleration time histories at offshore stations is about 50%of the ratio at onshore stations.The V/H for offshore ground motions is lower than that for onshore motions,especially for periods less than 0.8 s.Furthermore,based on the results in statistical analysis for offshore recordings in the K-NET,the simplified V/H design equations for offshore motions in minor and moderate earthquakes are proposed for seismic analysis of offshore structures.

Polyethoxylation and polypropoxylation reactions：Kinetics,mass transfer and industrial reactor design

Ethoxylation and propoxylation reactions are performed in the industry to produce mainly non-ionic surfactants and ethylene oxide(EO)–propylene oxide(PO) copolymers.Both the reactions occur in gas–liquid reactors by feeding gaseous EO,PO or both into the reactor containing a solution of an alkaline catalyst(KOH or Na OH).Non-ionic surfactants are produced by using liquid starters like fatty alcohols,fatty acids or alkyl-phenols,while when the scope is to prepare EO–PO copolymers the starter can be a mono-or multi-functional alcohol of low molecular weight.Both reactions are strongly exothermic,and EO and PO,in some conditions,can give place to runaway and also to explosive side reactions.Therefore,the choice of a suitable reactor is a key factor for operating in safe conditions.A correct reactor design requires:(i) the knowledge of the kinetic laws governing the rates of the occurring reactions;(ii) the role of mass and heat transfer in affecting the reaction rate;(iii) the solubility of EO and PO in the reacting mixture with the non-ideality of the reacting solutions considered;(iv) the density of the reacting mixture.All these aspects have been studied by our research group for different starters of industrial interest,and the data collected by using semibatch well stirred laboratory reactors have been employed for the simulation of industrial reactors,in particular Gas–Liquid Spray Tower Loop Reactors.

Study on unknown input reduced-order observer for fault diagnosis

A novel unknown input reduced-order observer (UIRO) design scheme is presented. It is proved that unknown input appearing in measurement can be eliminated by a simple algebraic transformation. Then, a new UIRO design scheme is proposed via a transformation under no unknown input existing in measurement. Compared with other known results, the condition is weaker than others. So it was further reasonable. The design procedure proposed is simple and straightforward enough to be applied. An example is given to show its efficiency in fault diagnosis.

CONVEXIFICATION AND CONCAVIFICATION METHODS FOR SOME GLOBAL OPTIMIZATION PROBLEMS

In this paper, firstly, we propose several convexification and concavification transformations to convert a strictly monotone function into a convex or concave function, then we propose several convexification and concavification transformations to convert a non-convex and non-concave objective function into a convex or concave function in the programming problems with convex or concave constraint functions, and propose several convexification and concavification transformations to convert a non-monotone objective function into a convex or concave function in some programming problems with strictly monotone constraint functions. Finally, we prove that the original programming problem can be converted into an equivalent concave minimization problem, or reverse convex programming problem or canonical D.C. programming problem. Then the global optimal solution of the original problem can be obtained by solving the converted concave minimization problem, or reverse convex programming problem or canonical D.C. programming problem using the existing algorithms about them.