期刊文献+
共找到70篇文章
< 1 2 4 >
每页显示 20 50 100
一类准周期参激非线性扭振系统的周期簇发 被引量:6
1
作者 时培明 李纪召 +1 位作者 刘彬 韩东颖 《振动与冲击》 EI CSCD 北大核心 2012年第4期100-104,共5页
考虑旋转机械中两种频率不同的周期参数激励同时存在对其传动系统的影响,基于拉格朗日方程,建立一类含准周期参激刚度和摩擦阻尼的非线性扭振系统的动力学方程。运用多尺度法对该扭振系统进行求解,得到系统在1/2亚谐波主参数共振下的幅... 考虑旋转机械中两种频率不同的周期参数激励同时存在对其传动系统的影响,基于拉格朗日方程,建立一类含准周期参激刚度和摩擦阻尼的非线性扭振系统的动力学方程。运用多尺度法对该扭振系统进行求解,得到系统在1/2亚谐波主参数共振下的幅频特性方程和分岔响应方程。在此基础上,研究了当两种周期参激的频率相差较大时非线性扭振系统的周期簇发现象,分析了快变参激和慢变参激对扭振系统的周期簇发的影响。通过数值仿真,给出了产生周期簇发的参数取值区域。在该区域内系统发生静息态与激发态的相互转迁,当快变激励的幅值减小时,激发态区域扩大,簇发的时间延长,通过调节慢变参激幅值会改变系统簇发的类型和轨迹。 展开更多
关键词 旋转机械 周期参激 扭振 周期
下载PDF
具有射击域的武器系统的击发特性与精度 被引量:3
2
作者 王军 李玉山 +1 位作者 张贤椿 郭治 《兵工学报》 EI CAS CSCD 北大核心 2010年第2期144-148,共5页
针对具有射击域的武器系统,研究其火控系统击发特性与精度。在分析随机穿越周期及滞留时间的基础上,得出了击发周期、允许射击时间及停射时间的分布特性及其均值。分析了加入射击域后以缩短允许射击时间为代价提高命中精度的实质,并定... 针对具有射击域的武器系统,研究其火控系统击发特性与精度。在分析随机穿越周期及滞留时间的基础上,得出了击发周期、允许射击时间及停射时间的分布特性及其均值。分析了加入射击域后以缩短允许射击时间为代价提高命中精度的实质,并定量的演绎了射击精度提高的程度。以靶场实测数据作为统计对象,验证了结论的可信性,为具有射击域的武器系统的论证、设计、检验提供了理论支持。 展开更多
关键词 自动控制技术 射击域 发周期 允许射击时间 停射时间 射击精度
下载PDF
文氏桥振荡器的簇发现象分析及实验验证 被引量:4
3
作者 徐权 张琴玲 史国栋 《电气电子教学学报》 2016年第5期46-49,共4页
本文采用一对二极管将无源LC滤波器非线性耦合到文氏桥振荡器的并联桥臂替换电阻,实现了一种新颖的文氏桥振荡器;建立了该电路的动力学模型,开展了动力学行为分析。结果表明:文氏桥振荡器在给定的参数域内具有快慢效应。进一步研究了混... 本文采用一对二极管将无源LC滤波器非线性耦合到文氏桥振荡器的并联桥臂替换电阻,实现了一种新颖的文氏桥振荡器;建立了该电路的动力学模型,开展了动力学行为分析。结果表明:文氏桥振荡器在给定的参数域内具有快慢效应。进一步研究了混沌簇发和周期簇发现象。本文研制了实验电路,该实验电路结构简单、易物理实现,实验测量和数值仿真两者结果一致,证明了理论分析的有效性。 展开更多
关键词 周期振荡 混沌簇振荡 文氏桥振荡器
下载PDF
地震勘探发平台的研制及在地质建模中的应用
4
作者 魏红华 《科技信息》 2014年第4期40-41,共2页
依据面向对象(object-oriented)的编程思想,对油气勘探开发过程中所用到的各种图件的通用属性和方法进行集成,把它们编制成特定的地震器件类,这些地震器件类具有封装性好、功能齐全、交互性强、操作应用简单的特点,不仅具有其它通用器件... 依据面向对象(object-oriented)的编程思想,对油气勘探开发过程中所用到的各种图件的通用属性和方法进行集成,把它们编制成特定的地震器件类,这些地震器件类具有封装性好、功能齐全、交互性强、操作应用简单的特点,不仅具有其它通用器件(X-Window/Motif)的属性和优点,而且它紧密结合油气勘探软件开发的特点和方法,特别地把具有立体起伏感强,并带复杂的光源和明暗处理的三维立体数据、三维地质模型及三维地震数据的显示等三维可视化技术引进,用于油气勘探软件的开发过程,把勘探开发软件引进一个三维世界,这将比传统显示技术更快速、更清晰地把相关信息传达给用户。本文对该平台所涉及的关键技术和方法进行了详细地探讨,并对其中的各种器件功能作了说明,最后,通过在地质建模中的实例展示了该方法和技术的效果。该平台的研制为研究人员和软件开发人员提供了方便的、简单的捷径,通过对地震器件库的应用进行地震软件的开发工作,从而缩短软件的开发周期,并提高软件的质量。 展开更多
关键词 面向对象 地震器件库 X-Window/Motif 地质模型 发周期
下载PDF
Identification of Differentially Expressed MicroRNAs During the Development of Chinese Murine Mammary Gland 被引量:5
5
作者 王春梅 李庆章 《Journal of Genetics and Genomics》 SCIE CAS CSCD 北大核心 2007年第11期966-973,共8页
MicroRNAs (miRNAs) are endogenous -22 nucleofide-long noncoding RNAs. In this study, to investigate miRNA expression profiles and their functions in mammary gland development, we have used microarray as well as qRT-... MicroRNAs (miRNAs) are endogenous -22 nucleofide-long noncoding RNAs. In this study, to investigate miRNA expression profiles and their functions in mammary gland development, we have used microarray as well as qRT-PCR, to analyze the miRNA expression changes along the murine mammary cycle during pregnancy, particularly on transition from pregnancy to lactation. It shows that every developmental stage of the mammary gland has its own mjRNA expression pattern. Compared with virgin and involution, some miRNAs such as miR-138 and miR-431 are downregulated, whereas, some miRNAs such as miR-133 and miR-133a-133b are upregulated during pregnancy and lactation. These results indicate that miRNAs are functionally involved in mammary gland development. 展开更多
关键词 microRNA (miRNA) MICROARRAY mammary pregnancy cycle gene expression regulation
下载PDF
鸡腿蘑液体菌种的研究 被引量:5
6
作者 曾嵋涓 章克昌 《中国食用菌》 北大核心 2002年第3期3-5,共3页
通过鸡腿蘑液体菌种接固体栽培料的实验 ,证明选择种龄为 3天 ,接种量为 10 % ,并以搅拌方式接种时 ,可在一周发满菌丝 ,与传统的制种方式相比 ,大大缩短了发菌周期 ,并为将来实现鸡腿蘑的工业化生产提供了基础数据。
关键词 鸡腿蘑 液体菌种 深层 菌丝周期 固体栽培 周期 工业化生产
下载PDF
香菇栽培配料的新工艺 被引量:1
7
作者 张长铠 陈雅丽 +1 位作者 房敏 王洪桂 《微生物学通报》 CAS CSCD 北大核心 1995年第1期61-62,共2页
在国内香菇(Lentinusedodes)栽培料常规配方基础上,设计了添加1.2%盐酸取代常规配方中1%蔗糖的新工艺。经测定,两种栽培料灭菌后还原糖与总糖浓度、发菌周期与子实体产量基本一致。新配方栽培料灭菌后pH降至... 在国内香菇(Lentinusedodes)栽培料常规配方基础上,设计了添加1.2%盐酸取代常规配方中1%蔗糖的新工艺。经测定,两种栽培料灭菌后还原糖与总糖浓度、发菌周期与子实体产量基本一致。新配方栽培料灭菌后pH降至5.6,亦是香菇菌丝生长最适pH值。新配方工艺在山东省淄博市石马等生产单位应用,可降低生产成本10%左右。 展开更多
关键词 香菇 栽培 栽培料配方 周期 子实体产量
下载PDF
香菇栽培料新工艺 被引量:9
8
作者 万洪善 《微生物学杂志》 CAS CSCD 2004年第6期62-63,共2页
在国内香菇栽培料常规配方基础上,设计了添加2.5mL盐酸/kg取代常规配方中1%蔗糖的新工艺,经测定,2种栽培料灭菌后还原糖与蔗糖浓度、发菌期与子实体产量基本一致,新配方栽培料灭菌后pH值为5.6,是香菇菌丝生长最适pH值。新配方工艺可降... 在国内香菇栽培料常规配方基础上,设计了添加2.5mL盐酸/kg取代常规配方中1%蔗糖的新工艺,经测定,2种栽培料灭菌后还原糖与蔗糖浓度、发菌期与子实体产量基本一致,新配方栽培料灭菌后pH值为5.6,是香菇菌丝生长最适pH值。新配方工艺可降低生产成本10%左右。 展开更多
关键词 香菇 栽培料 周期 子实体产量
下载PDF
Cell Cycle Kinetic Analysis in the Cortical Regions of the Lentil Primary Root During Germination 被引量:1
9
作者 喻富根 庞延军 +1 位作者 赵剑春 王强 《Acta Botanica Sinica》 CSCD 2002年第7期764-770,共7页
Cell cycle kinetic activity in the cortical cells of the lentil (Lens culinaris Me-die. cv. Verte du Puy) primary root during germination was examined both temporally and spatially. Immunohistochemical and cytological... Cell cycle kinetic activity in the cortical cells of the lentil (Lens culinaris Me-die. cv. Verte du Puy) primary root during germination was examined both temporally and spatially. Immunohistochemical and cytological evidence indicated that DNA replication and cell division started in the cortical cells of tire lentil primary root after around 13 and 17 h of imbibition, respectively. The first cells in DNA synthesis and the First mitotic figures all appeared in the cortical cells about I mm front the root-cap junction, but these divided cells had synthesized their DNA during the maturity of seed instead of during germination. The kinetic pattern of activity of the first cell cycle showed that these cells were not activated synchronously, but re-entered the cell cycle in turn depending on their places in the root tip, However, the adjacent cells partially synchronously proceeded their cell cycle. 展开更多
关键词 cell cycle primary root GERMINATION IMMUNOHISTOCHEMISTRY Lens culinaris
下载PDF
中南民族学院学报(自然科学版)1996~2001年化学学报刊刊文情况统计分析
10
作者 李敏 《中南民族大学学报(自然科学版)》 CAS 2002年第2期91-94,共4页
对中南民族学院学报(自然科学版)1996-2001年间化学学科论文的发搞周期,论文转摘,论文引入及作者情况等进行了统计分析,结果显示,论文发搞周期越来越短,作者平均年龄日趋年轻,论文引文越来越新,至发搞止,仅2000年所论文在症... 对中南民族学院学报(自然科学版)1996-2001年间化学学科论文的发搞周期,论文转摘,论文引入及作者情况等进行了统计分析,结果显示,论文发搞周期越来越短,作者平均年龄日趋年轻,论文引文越来越新,至发搞止,仅2000年所论文在症状国化学文摘(CA)上的转摘率为66.7%,该统计资料可为有关部门提供了有用的参考数据。 展开更多
关键词 中南民族学院 自然科学版 1996-2001年 刊文情况 高校学报 化学论文 统计分析 周期 论文引文
下载PDF
Anti-periodic solutions to a class of second-order evolution equations
11
作者 张莉娜 薛星美 《Journal of Southeast University(English Edition)》 EI CAS 2003年第4期432-436,共5页
In this paper we discuss the anti-periodic problem for a class of abstractnonlinear second-order evolution equations associated with maximal monotone operators in Hilbertspaces and give some new assumptions on operato... In this paper we discuss the anti-periodic problem for a class of abstractnonlinear second-order evolution equations associated with maximal monotone operators in Hilbertspaces and give some new assumptions on operators. We establish the existence and uniqueness ofanti-periodic solutions, which improve andgeneralize the results that have been obtained. Finally weillustrate the abstract theory by discussing a simple example of an anti-periodic problem fornonlinear partial differential equations. 展开更多
关键词 maximal monotone operator anti-periodic solution poincare inequality second-order evolution equations
下载PDF
Application of shortened heat treatment cycles on A356 automotive brake calipers with respective globular and dendritic microstructures 被引量:3
12
作者 H.MLLER G.GOVEN DER W.E.STUMPF 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2010年第9期1780-1785,共6页
Since the automotive industry has many possible applications for semi-solid metal (SSM)-high-pressure die casting (HPDC) parts, the newly developed heat treatment cycles, as well as the traditional heat treatment cycl... Since the automotive industry has many possible applications for semi-solid metal (SSM)-high-pressure die casting (HPDC) parts, the newly developed heat treatment cycles, as well as the traditional heat treatment cycles, were applied to A356 brake calipers cast using a LK DCC630 HPDC machine.Vickers hardness measurements at a cross section of the brake calipers were performed, indicating that similar values can be obtained when using the significantly shorter heat treatment cycles.Finally, the typical tensile properties that can be obtained for SSM-HPDC A356 brake calipers are compared with those manufactured by gravity die casting.Results indicate that the differences in microstructures (globular or dendritic) do not have a noteworthy effect on the heat treatment response.This implies that the short heat treatment cycles originally developed for globular SSM-HPDC A356 castings can be successfully applied to dendritic liquid A356 castings too. 展开更多
关键词 semi-solid metal (SSM) forming heat treatment A356 brake caliper gravity die casting AUTOMOTIVE
下载PDF
Role of endoscopic ultrasound in idiopathic pancreatitis 被引量:14
13
作者 Piyush Somani Tagore Sunkara Malay Sharma 《World Journal of Gastroenterology》 SCIE CAS 2017年第38期6952-6961,共10页
Recurrent acute pancreatitis(RAP) is defined based on the occurrence of two or more episodes of acute pancreatitis. The initial evaluation fails to detect the cause of RAP in 10%-30% of patients, whose condition is cl... Recurrent acute pancreatitis(RAP) is defined based on the occurrence of two or more episodes of acute pancreatitis. The initial evaluation fails to detect the cause of RAP in 10%-30% of patients, whose condition is classified as idiopathic RAP(IRAP). Idiopathic acute pancreatitis(IAP) is a diagnostic challenge for gastroenterologists. In view of associated morbidity and mortality, it is important to determine the aetiology of pancreatitis to provide early treatment and prevent recurrence. Endoscopic ultrasound(EUS) is an investigation of choice for imaging of pancreas and biliary tract. In view of high diagnostic accuracy and safety of EUS, a EUS based management strategy appears to be a reasonable approach for evaluation of patients with a single/recurrent idiopathic pancreatitis. The most common diagnoses by EUS in IAP is biliary tract disease. The present review aims to discuss the role of EUS in the clinical management and diagnosis of patients with IAP. It elaborates the diagnostic approach to IAP in relation to EUS and other different modalities. Controversial issues in IAP like when to perform EUS, whether to perform after first episode or recurrent episodes, comparison among different investigations and the latest evidence significance are detailed. 展开更多
关键词 Endoscopic ultrasound PANCREATITIS ERCP MRCP USG CT Idiopathic recurrent pancreatitis ASCARIASIS Pancreatic cancer Biliary sludge GALLSTONES MICROLITHIASIS Common bile duct stones
下载PDF
Energy and exergy recovery from exhaust hot water using organic Rankine cycle and a retrofitted configuration 被引量:8
14
作者 SUN Wen-qiang YUE Xiao-yu +1 位作者 WANG Yan-hui CAI Jiu-ju 《Journal of Central South University》 SCIE EI CAS CSCD 2018年第6期1464-1474,共11页
Exhaust hot water (EHW) is widely used for various industrial processes. However, the excess heat carried by EHW is typically ignored and discharged into the environment, resulting in heat loss and heat pollution. A... Exhaust hot water (EHW) is widely used for various industrial processes. However, the excess heat carried by EHW is typically ignored and discharged into the environment, resulting in heat loss and heat pollution. An organic Rankine cycle (ORC) is an attractive technology to recycle heat from low-temperature energy carriers. Herein, ORC was used to recycle the heat carried by EHW. To investigate the energy and exergy recovery effects of EHW, a mathematical model was developed and a parametric study was conducted. The energy efficiency and exergy efficiency of the EHW-driven ORC system were modeled with R245fa, Rl13 and R123 as the working fluids. The results demonstrate that the EHW and evaporation temperatures have significant effects on the energy and exergy efficiencies of the EHW-driven ORC system. Under given EHW conditions, an optimum evaporation temperature exists corresponding to the highest exergy efficiency. To further use the low-temperature EHW, a configuration retrofitted to the ORC by combining with flash evaporation (FE) was conducted. For an EHW at 120 ~C and 0.2 MPa, the maximum exergy efficiency of the FE-ORC system is 45.91% at a flash pressure of 0.088 MPa. The FE-ORC performs better in exergy efficiency than the basic FE and basic EHW-driven ORC. 展开更多
关键词 exhaust hot water (EHW) organic Rankine cycle (ORC) energy efficiency exergy efficiency flashevaporation (FE)
下载PDF
Calculate Joint Probability Distribution of Steady Directed Cyclic Graph with Local Data and Domain Casual Knowledge 被引量:1
15
作者 Qin Zhang Kun Qiu Zhan Zhang 《China Communications》 SCIE CSCD 2018年第7期146-155,共10页
It is desired to obtain the joint probability distribution(JPD) over a set of random variables with local data, so as to avoid the hard work to collect statistical data in the scale of all variables. A lot of work has... It is desired to obtain the joint probability distribution(JPD) over a set of random variables with local data, so as to avoid the hard work to collect statistical data in the scale of all variables. A lot of work has been done when all variables are in a known directed acyclic graph(DAG). However, steady directed cyclic graphs(DCGs) may be involved when we simply combine modules containing local data together, where a module is composed of a child variable and its parent variables. So far, the physical and statistical meaning of steady DCGs remain unclear and unsolved. This paper illustrates the physical and statistical meaning of steady DCGs, and presents a method to calculate the JPD with local data, given that all variables are in a known single-valued Dynamic Uncertain Causality Graph(S-DUCG), and thus defines a new Bayesian Network with steady DCGs. The so-called single-valued means that only the causes of the true state of a variable are specified, while the false state is the complement of the true state. 展开更多
关键词 directed cyclic graph probabilistic reasoning parameter learning causality complex network
下载PDF
Requirement for cyclin D3 in germinal center formation and function 被引量:3
16
作者 Jonathan U Peled J Jessica Yu +8 位作者 Jeganathan Venkatesh Enguang Bi B Belinda Ding Melissa Krupski-Downs Rita Shaknovich Piotr Sicinski Betty Diamond Matthew D Scharff B Hilda Ye 《Cell Research》 SCIE CAS CSCD 2010年第6期631-646,共16页
Germinal centers (GC) of secondary lymphoid tissues are critical to mounting a high-affinity humoral immune response. B cells within the GC undergo rapid clonal expansion and selection while diversifying their antib... Germinal centers (GC) of secondary lymphoid tissues are critical to mounting a high-affinity humoral immune response. B cells within the GC undergo rapid clonal expansion and selection while diversifying their antibody genes. Although it is generally believed that GC B cells employ a unique proliferative program to accommodate these processes, little is known about how the GC-associated cell cycle is orchestrated. The D-type cyclins constitute an important component of the cell cycle engine that enables the cells to respond to physiological changes. Cell type- and developmental stage-specific roles of D-type cyclins have been described but the cyclin D requirement during GC reaction has not been addressed. In this study, we report that cyclin D3 is largely dispensable for proliferation and Ig class switching of in vitro activated B cells. In contrast, GC development in Ccnd3^-/- mice is markedly impaired, as is the T cell-dependent antibody response. Within the GC, although both switched and unswitched B cells are affected by cyclin D3 inactivation, the IgM^- pool is more severely reduced. Interestingly, despite a compensatory increase in cyclln D2 expression, a significant number of Ccnd3^-/- GC B cells accumulate in quiescent GO state. Lastly, although cyclin D3 inactivation did not disrupt BCL6 expression in GC B cells, it completely blocked the GC promoting effect of BCL6 overexpression, suggesting that cyclin D3 acts downstream of BCL6 to regulate GC formation. This is the first demonstration that cyclin D3 plays an important and unique role at the GC stage of B cell development. 展开更多
关键词 B cell development germinal center cell cycle cyclin D3
下载PDF
Research on Development Trend of Automobile Electronic Technology 被引量:3
17
作者 Zhigang Fu Xiaodong Ding 《International Journal of Technology Management》 2013年第2期20-22,共3页
Along with the popularization of artificial intelligence and information technology, the development of automobile industry have been closely combined with information technology, environmental protection and energy s... Along with the popularization of artificial intelligence and information technology, the development of automobile industry have been closely combined with information technology, environmental protection and energy saving ideas, promotion and application of electronic control technology, which development cycle becoming shorter and shorter. In this paper, through the analysis of the present application situation and development trend of the automobile electronic technology at present, in order to provide a theoretical reference for the future development of the automobile electronic control technology. 展开更多
关键词 AUTOMOBILE electronic control technology WIFI
下载PDF
香菇栽培配料新工艺 被引量:1
18
作者 刘淑娇 《山西农业大学学报(自然科学版)》 CAS 2002年第2期154-156,共3页
在国内香菇栽培料常规配方基础上 ,设计了添加 1 2 %盐酸取代常规配方中 1%蔗糖的新工艺。经测定 ,2种栽培料灭菌后还原糖与蔗糖浓度、发菌周期与子实体产量基本一致。新配方栽培料灭菌后pH为 5 6 ,亦是香菇菌丝生长最适pH值。新配方... 在国内香菇栽培料常规配方基础上 ,设计了添加 1 2 %盐酸取代常规配方中 1%蔗糖的新工艺。经测定 ,2种栽培料灭菌后还原糖与蔗糖浓度、发菌周期与子实体产量基本一致。新配方栽培料灭菌后pH为 5 6 ,亦是香菇菌丝生长最适pH值。新配方工艺在山东淄博市石马等生产单位应用 ,可降低生产成本 10 展开更多
关键词 香菇 栽培 配料新工艺 周期 子实体产量
下载PDF
Life cycle assessment in the environmental impact evaluation of urbandevelopment--a case study of land readjustment project,Hyogo District, Japan 被引量:5
19
作者 葛坚 陆江 HOKAOKazunori 《Journal of Zhejiang University Science》 EI CSCD 2003年第6期702-708,共7页
In this paper, the Life Cycle of Urban Development was firstly analyzed, and the phases of Life Cycle Assessment applied to Urban Development (ULCA) were described. As a case study, ULCA was applied in the environment... In this paper, the Life Cycle of Urban Development was firstly analyzed, and the phases of Life Cycle Assessment applied to Urban Development (ULCA) were described. As a case study, ULCA was applied in the environmental impact assessment of the land readjustment project of Hyogo District of Saga, Japan. In addition, mitigation proposals for reducing CO2 were also presented and the relevant environmental ef-fects were simulated. 展开更多
关键词 Life Cycle Assessment (LCA) Urban development Environmental impact
下载PDF
Development and Application of Hydrocracking Catalysts RHC-1/RHC-5 for Maximizing High Quality Chemical Raw Materials Yield 被引量:6
20
作者 Mao Yichao Nie Hong +3 位作者 Li Mingfeng Hu Zhihai Zhao Guangle Zhao Yang 《China Petroleum Processing & Petrochemical Technology》 SCIE CAS 2018年第2期41-47,共7页
To adapt to the change in the demand of the oil refining market,two hydrocracking catalysts,RHC-1 and RHC-5,were developed to improve the quality of tail oil.The catalysts were designed based on the theory of selectiv... To adapt to the change in the demand of the oil refining market,two hydrocracking catalysts,RHC-1 and RHC-5,were developed to improve the quality of tail oil.The catalysts were designed based on the theory of selective ring-opening.By selecting more acidic molecular sieves,the problem of poor selectivity of conventional materials can be solved to properly match up to the hydrogenation performance of catalysts.Compared with the performance of previous catalysts,the quality of the tail oil achieved by the said catalysts is better,and the BMCI is reduced by 1—2 units.In the long cycle operation of the petroleum industry,the good quality of the tail oil has been verified and the adaptability of the process conditions is good.When the RHC-1 catalyst is used to process heavy feed under medium pressure,a BMCI value of about12 can be obtained along with a nearly 60%yield of tail oil.The total yield of chemical raw material(steaming cracking feed+catalytic reforming feed)can exceed 80%,and the hydrogen consumption has dropped by nearly 50%as compared to the conventional hydrocracking conversion rate.When processing a mixed CGO and VGO feed with the full conversion mode under a hydrogen pressure of 13.0 MPa,the RHC-5 catalyst can yield about 68.4%of heavy naphtha with a potential aromatic content of up to 50.6,while the total yield of chemical raw materials can reach more than 98%.The results of industrial application of these catalysts show that more than 30%of high quality tail oil can be obtained via processing of inferior quality feed,and its BMCI value can reach 10.7.The total yield of chemical raw materials can reach more than65%.The industrial operation process has implemented two operating cycles totaling 8 years. 展开更多
关键词 HYDROCRACKING CATALYST chemical raw material tail oil
下载PDF
上一页 1 2 4 下一页 到第
使用帮助 返回顶部