CrN coatings were deposited using cathodic arc evaporation in stationary system on the substrate surface faced to the plasma source and on the back surface.The effect of nitrogen pressure on the structure and phase co...CrN coatings were deposited using cathodic arc evaporation in stationary system on the substrate surface faced to the plasma source and on the back surface.The effect of nitrogen pressure on the structure and phase composition,mechanical and tribological properties of the coatings was investigated.The coating morphology and structure were characterized using SEM and contact profilometry and X-ray diffractometry,respectively.Mechanical properties were studied by nanoindentation.The friction and wear properties of the coatings were investigated by ball-on-disk tribometer.An increase in nitrogen pressure during coating deposition results in phase transformation according to the relation Cr2N→Cr2N+CrN→CrN.The roughness of the coatings deposited on the front side of the substrate is higher than that on the back side,mainly due to larger number of macroparticles.The hardness and elastic modulus are also higher on the front side of the substrate.The adhesion and wear rate of the coatings have an inverse relationship.展开更多
CrAlYN coatings with different Y contents(0,5 and 12 at.%)were deposited by cathodic arc evaporation to investigate the influence of Y-addition on the structure,mechanical and thermal properties of CrAlN coatings by u...CrAlYN coatings with different Y contents(0,5 and 12 at.%)were deposited by cathodic arc evaporation to investigate the influence of Y-addition on the structure,mechanical and thermal properties of CrAlN coatings by using X-ray diffraction,scanning electron microscopy,differential scanning calorimetry,thermal gravimetric analysis and nanoindentation.The structural transformation of single phase cubic Cr_(0.42)Al_(0.58)N and Cr_(0.39)Al_(0.56)Y_(0.05)N coatings to cubic−wurtzite mixed Cr_(0.32)Al_(0.56)Y_(0.12)N coating leads to a drop in hardness from(30.2±0.7)GPa of Cr_(0.42)Al_(0.58)N and(32.0±1.0)GPa of Cr_(0.39)Al_(0.56)Y_(0.05)N to(25.2±0.7)GPa of Cr_(0.32)Al_(0.56)Y_(0.12)N.The incorporation of 5 at.%Y retards the thermal decomposition of CrAlN,verified by the postponed precipitation of w-AlN and N-loss upon annealing.Correspondingly,Cr_(0.39)Al_(0.56)Y_(0.05)N coating consistently exhibits the highest hardness value during thermal annealing.Nevertheless,alloying with Y exerts an adverse effect on the oxidation resistance of CrAlN.展开更多
A novel arc-shaped piezoelectric generator based on flexible PVDF thin film is presented and systemically studied.With a periodical external force,the generator can produce peak voltage of 45.6 V and peak power of 30....A novel arc-shaped piezoelectric generator based on flexible PVDF thin film is presented and systemically studied.With a periodical external force,the generator can produce peak voltage of 45.6 V and peak power of 30.7μW.The maximum power density reaches 38.4μW/cm3with a 4 cm×2 cm×100μm device,at the optimum load resistance of 33.33 MOhm.The influence of frequency,size dimension and load resistance are investigated through experimental measurements.With this high output arc-shaped generator,capacitors can be effectively charged and three commercial LEDs have been directly lighted without any energy storage unit.展开更多
文摘CrN coatings were deposited using cathodic arc evaporation in stationary system on the substrate surface faced to the plasma source and on the back surface.The effect of nitrogen pressure on the structure and phase composition,mechanical and tribological properties of the coatings was investigated.The coating morphology and structure were characterized using SEM and contact profilometry and X-ray diffractometry,respectively.Mechanical properties were studied by nanoindentation.The friction and wear properties of the coatings were investigated by ball-on-disk tribometer.An increase in nitrogen pressure during coating deposition results in phase transformation according to the relation Cr2N→Cr2N+CrN→CrN.The roughness of the coatings deposited on the front side of the substrate is higher than that on the back side,mainly due to larger number of macroparticles.The hardness and elastic modulus are also higher on the front side of the substrate.The adhesion and wear rate of the coatings have an inverse relationship.
基金The authors are grateful for the financial supports from the National Natural Science Foundation of China(No.51775560).
文摘CrAlYN coatings with different Y contents(0,5 and 12 at.%)were deposited by cathodic arc evaporation to investigate the influence of Y-addition on the structure,mechanical and thermal properties of CrAlN coatings by using X-ray diffraction,scanning electron microscopy,differential scanning calorimetry,thermal gravimetric analysis and nanoindentation.The structural transformation of single phase cubic Cr_(0.42)Al_(0.58)N and Cr_(0.39)Al_(0.56)Y_(0.05)N coatings to cubic−wurtzite mixed Cr_(0.32)Al_(0.56)Y_(0.12)N coating leads to a drop in hardness from(30.2±0.7)GPa of Cr_(0.42)Al_(0.58)N and(32.0±1.0)GPa of Cr_(0.39)Al_(0.56)Y_(0.05)N to(25.2±0.7)GPa of Cr_(0.32)Al_(0.56)Y_(0.12)N.The incorporation of 5 at.%Y retards the thermal decomposition of CrAlN,verified by the postponed precipitation of w-AlN and N-loss upon annealing.Correspondingly,Cr_(0.39)Al_(0.56)Y_(0.05)N coating consistently exhibits the highest hardness value during thermal annealing.Nevertheless,alloying with Y exerts an adverse effect on the oxidation resistance of CrAlN.
基金supported by the National Natural Science Foundation of China(Grant Nos.61176103,91023045)the National Hi-Tech Research and Development Program("863" Project)(Grant No.2013AA041102)the National Ph.D.Foundation Project(Grant No.20110001110103)
文摘A novel arc-shaped piezoelectric generator based on flexible PVDF thin film is presented and systemically studied.With a periodical external force,the generator can produce peak voltage of 45.6 V and peak power of 30.7μW.The maximum power density reaches 38.4μW/cm3with a 4 cm×2 cm×100μm device,at the optimum load resistance of 33.33 MOhm.The influence of frequency,size dimension and load resistance are investigated through experimental measurements.With this high output arc-shaped generator,capacitors can be effectively charged and three commercial LEDs have been directly lighted without any energy storage unit.
