油页岩灰渣制备空心陶瓷微球及机理探讨

以油页岩灰渣为实验原料,利用火焰喷枪熔射法制备了空心陶瓷微球。采用TG-DSC对油页岩灰渣进行热分析,采用SEM和XRD分别对油页岩灰渣和空心陶瓷微球的微观形貌和物相组成进行分析。研究结果表明,利用火焰喷枪熔射法制备的微球绝大多数为球状,极少部分为不规则形状,微球破碎后可发现其为空心结构;空心微球的形成机理为:油页岩灰渣粉末受热熔化、发气物质形成气泡、气泡合并、降温凝固、最终形成空心微球;油页岩灰渣自身疏松的结构、所含充足的发气物质和适宜的熔射温度是形成微球空心结构的重要因素。

Leaf Volatiles Induced by Mechanical Damage from Diverse Taxonomic Tree Species

Plant volatiles induced by wounding play key roles in plant-insect and plant-plant interactions. To deeply understand the mechanism of their induction by wounding and their functions in interplant communications, four diverse tree species: ashleaf maples ( Acer negundo L.), hankow willow (Salix matsudana Koidz.), Chinese white poplar ( Populus tomentosa Carr.) and poplar opera 8277 (P. simonii x P. pyramibalis cv.), were used as materials. The blends of volatiles collected after damage were detected with GCMS. Most of the induced compounds reach high concentrations in 5 h. They are acyclic monoterpenes, fatty acid derivatives, and aromatic compounds. To authors' knowledge, dimethyl adipate, diisobutyl succinate and benthothiazole have never been reported in previous herbivore insect-plant systems, After being damaged 2 h, green leaf volatiles were released in large amount. The repellents were detected in higher concentration after 24 h. The time of releasing is different within different species, but many kinds of volatiles widely existed in different trees. There were some difference among species. Health ashleaf maple released more terpenoids, but poplars and willow produced more aromatic compounds.

Identification and quality evaluation of Lepidium meyenii. (Maca) based on gas chromatographic analysis of its essential oils from roots

Lepidium meyeniiWalp. （Maca）, a perennial herbaceous plant with narrow distdbution in the Andean region, was cultivated by local residents as early as 1600 B.C. It has high nutritional values and multiple medicinal effects. In recent years the plant source of Maca has been greatly scarce since Maca products are increasingly becoming popular in the world. This makes the study urgent on the identification and quality evaluation of Maca materials. In present work, four Mace samples of different origins or handlings and three other natural plants, including radish, odental ginseng and American ginseng, were investigated. Their essential oils （steam distillates） of the hypogeal parts were weighed and analyzed by GC/MS. Through comparison of the characteristics of their chromatograms, it was found that the essential oil of Maca had unique GC/MS behaviors, and the characteristic peaks produced by the major essential oil components （Phenylacetonitrile, Benzaldehyde, 3-Methoxyphenylacetonitrile, etc） were distinct. Furthermore, the chromatograms of several Maca samples showed a similar qualitative pattern except for some differences in the quantitative composition, and the percentage of total essential oils in the samples varied from 0.88 % to 1.59 %. These behaviors and technologies can be applied to the identification of Maca materials in the markets and be a supplement to assess the quality of Maca matedals.

Performance evaluation of a diesel engine by using producer gas from some under-utilized biomass on dual-fuel mode of diesel cum producer gas

Producer gas through gasification of biomass can be used as an alternate fuel in rural areas due to high potential of biomass resources in India.Experiments were conducted to study the performance of a diesel engine(four stroke,single cylinder,5.25 kW) with respect to its thermal efficiency,specific fuel consumption and diesel substitution by use of diesel alone and producer gas-cum-diesel(dual fuel mode).Three types of biomass,i.e.wood chips,pigeon pea stalks and corn cobs were used for generation of producer gas.A producer gas system consisting of a downdraft gasifier,a cooling cum cleaning unit,a filtering unit and a gas air mixing device was designed,fabricated and used to power a 5.25 kW diesel engine on dual fuel mode.Performance of the engine was reported by keeping biomass moisture contents as 8%,12%,16%,and 21%,engine speed as 1 600 r/min and with variable engine loads.The average value of thermal efficiency on dual fuel mode was found slightly lower than that of diesel mode.The specific diesel consumption was found to be 60%-64% less in dual fuel mode than that in diesel mode for the same amount of energy output.The average diesel substitution of 74% was observed with wood chips followed by corn cobs(78%) and pigeon pea stalks(82%).Based on the performance studied,the producer gas may be used as a substitute or as supplementary fuel for diesel conservation,particularly for stationary engines in agricultural operations in the farm.

Response of coal reservoir porosity to magma intrusion in the Shandong Qiwu Mine,China

The Qiwu Mine is located in the Ten Xian coal field of Shandong province.It experienced repeated volcanic activity,after the coal beds formed,where magma intrusion was significant The effect of coal reservoir porosity after magma intrusion was studied by analysis of regional and mine structure and magmatic activity.Experimental methods including maceral measurement under the microscope and mercury porosimetry were used for testing the pore structure.The authors believe that magma intrusion into low-rank bituminous coal causes reservoir porosity to gradually increase：the closer to the magmatic rock a sample is,the less the porosity.The pore size distribution also changes.In the natural coal bed the pore size is mainly in the transitive and middle pore range.However,the coal changes to anthracite next to the magmatic rock and larger pores dominate.Regional magma thermal evolution caused coal close to magmatic rock to be roasted,which reduced the volatile matter,developed larger holes,and destroyed plant tissue holes.The primary reason for a porosity decrease in the vicinity of magmatic rock is that Bituminite resulting from the roasting fills the holes that were present initially.

Process engineering in electrochemical energy devices innovation

This review focuses on the application of process engineering in electrochemical energy conversion and storage devices innovation. For polymer electrolyte based devices, it highlights that a strategic simple switch from proton exchange membranes(PEMs) to hydroxide exchange membranes(HEMs) may lead to a new-generation of affordable electrochemical energy devices including fuel cells, electrolyzers, and solar hydrogen generators. For lithium-ion batteries, a series of advancements in design and chemistry are required for electric vehicle and energy storage applications. Manufacturing process development and optimization of the LiF eP O_4/C cathode materials and several emerging novel anode materials are also discussed using the authors' work as examples.Design and manufacturing process of lithium-ion battery electrodes are introduced in detail, and modeling and optimization of large-scale lithium-ion batteries are also presented. Electrochemical energy materials and device innovations can be further prompted by better understanding of the fundamental transport phenomena involved in unit operations.

Extensive application of rate transient method in performance analysis for low permeability gas reservoirs

Rate transient method is a recently-developed performance analysis tool specially designed for low-permeability or tight gas reservoirs. This method, theoretically based on pressure transient analysis, integrates material balance principle and the concept of material balance pseudo-time proposed by Blansingame. With daily production data of gas well, it could be used to calculate OGIP, current formation pressure, permeability, skin factor, to identify complex geologic boundaries, to determine whether drainage boundary has been reached, to calculate drainage area and drainage radius for single well and to predict performance. It has been extensively employed in more than ten low-permeability gas fields. It proves that most problems in performance analysis for low permeability gas reservoirs could be solved by this method. Field practices show great economical benefits could be achieved by employing this method in gas field development.

Linear Generator Used in Hybrid System Solar Biomass

The aim of this paper is to present the linear generator （Stirling solar dish） in the context of a HSSB （hybrid system solar biomass）, project P ＆ D （research and development P ＆ D 0041, in cooperation and partnership with CPFL--LIght and Force Paulista Company-Campinas, Piratininga, S.P. Brazil）. The other components of the system will be the solar ORC （organic Rankine cycle）, the rotary Stifling and the biomass gasifier. The integration of the complete system will be described in the paper, and is projected to be hydraulic one.

Performance and Effectiveness of Portable Air Cleaners in an Office Room： An Experimental Study

Nowadays, many people work in an office environment. Air pollutants, including particles and gases, are generated by humans and by different devices that are used in offices. Pollutants can also enter an office room with the air supplied from outdoors. It has been established that air pollutants have adverse health effects on human body. Air cleaning devices are commonly marketed as being beneficial for the health by removing air pollutants and consequently improving indoor air quality. The performance of five air cleaning technologies was tested in order to determine the generation of ozone and particles in an office room. The particle removal effectiveness of the technologies was also determined in order to clarify their ability to remove UFPs （ultrafine particles） in the office room. The tested five air cleaning technologies are non-thermal plasma, corona discharge ionizer, portable air purifier, electrostatic fibrous filter and three-dimensional fibrous filter. The interior surfaces of the office room emit low levels of volatile organic compounds, since the office room has not been refurbished for about two decades. The results showed that the particle removal effectiveness of the technologies was ranged between 0.2 and 0.45 for the office room. The three technologies using/generating ozone significantly increased the ozone level in the office room. However, no increase of the UFP concentration was detected.

Novel Air Purification System for Installation in Air Handling Units： Development, Assembly and Experimental Analysis

Nowadays, people pass 90% of their time in closed spaces, therefore, an increasing care in the creation and upkeep of healthier environments as a personal and as professional level become a major issue. The present project has as goal the verification and optimization of the implicit need of an OCRAMclima~ AHU （air handling units） in IAQ （indoor air quality） and its effectiveness in treatment and/or air purification, having as basis the legal national and European requirements for IAQ. This work was based on the study of the state of the art of the techniques in air purification and in the evaluation of their performance, culminating in the production of the prototype OCRAMclima~ NPS （nano purifying system）. The purifying phenomena involved are UVGI （ultraviolet germicidal irradiation） and catalytic ionization of air. The performance test was accomplished in a closed loop circuit, which results, obtained by an independent IAQ analyst, were satisfactory, indicating the viability of application of this system to indoor air disinfection. The outcome revealed that the conjugating of both phenomena, the air sterilizing by UV and catalytic ionization, is efficient when used for air purification, mainly for volatile organic compounds and bioaerosols.

Towards Sustainable Cellulosic Bioenergy

生物质是一种丰富易得的清洁能源,具有大幅减少温室气体排放的潜力。与以玉米及其他谷物为原料的生物质能源生产技术相比,由于纤维生物能源生产消耗的化石能源较少(化石能源与碳的比值低)而备受关注。然而,生物燃料生产系统并非简单,受到多种因素的影响,如能量供应、农村的经济发展水平、土地和生态系统的保护、温室气体减排的可能性以及社会培训等。本文简要综述生物质能源开发的经济与环境影响。根据区域气候和生态条件,不同地区具有各自的生物质种类或能源作物的优化组合。在不久的将来,生物质能源开发的生物技术所面临的挑战包括:生物质形成与细胞壁分解过程的认识与操控,生物质预处理技术,糖产量高的植物变种的选育,用于纤维素降解的酶和微生物的大规模筛选与选育等。除强调生物质能源开发的环境安全和公共健康的重要性之外,生物质能开发还需要解决生命周期评价(LCA)、可持续性的标准和指标的建立等问题。

Numerical experiments of disturbance to the solar atmosphere caused by eruptions

Despite extensive research on various global waves in solar eruptions, debate continues on the intrinsic nature of them. In this work, we performed numerical experiments of the coronal mass ejection with emphases on the associated large-scale MHD waves. A fast-mode shock forms in front of the flux rope during the eruption with a dimming region following it, and the development of a three-component structure of the ejecta is observed. At the flank of the flux rope, the slow-mode shock and the velocity vortices are also invoked. The dependence of the eruption energetics on the strength of the background field and the coronal plasma density distribution is apparent： the stronger the background field is, and/or the lower the coronal plasma density is, the more energetic the eruption is. In the lower Alfven speed environment, the slow mode shock and the large scale velocity vortices may be the source of the EIT wave. In the high Alfvdn speed environment, on the other hand, the echo due to the reflection of the fast shock on the bottom boundary could be so strong that its interaction with the slow mode shock and the velocity vortices produces the second echo propagating downward and causing the secondary disturbance to the boundary surface. We suggest that this second echo, together with the slow shock and the velocity vortices, could constitute a possible candidate of the source for the EIT wave.