A new method of switched reluctance wind power generation position sensorless based on DFNN by FEA was proposed, Through current and magnetic linkage to get the angle of SRG rotor position, the nonlinear mapping of cu...A new method of switched reluctance wind power generation position sensorless based on DFNN by FEA was proposed, Through current and magnetic linkage to get the angle of SRG rotor position, the nonlinear mapping of cur- rent-magnetic linkage-angle was built, By training these sample data from FEA, the angle of SRG rotor position was replaced by the output of DFNN to achieve SRG position sensorless. Simulation results show that the error between actual rotor position and estimate rotor position is small; SRG can commutate with great accuracy; and the output voltage of SRG wind power system under variable wind speed is essentially constant.展开更多
We present a novel, low-cost approach to fabricate flexible piezoelectric nano- generators （NGs） consisting of ZnO nanowires （NWs） on carbon fibers and foldable Au-coated ZnO NWs on paper. By using such designed s...We present a novel, low-cost approach to fabricate flexible piezoelectric nano- generators （NGs） consisting of ZnO nanowires （NWs） on carbon fibers and foldable Au-coated ZnO NWs on paper. By using such designed structure of the NGs, the radial ZnO NWs on a cylindrical fiber can be utilized fully and the electrical output of the NG is improved. The electrical output behavior of the NGs can be optionally controlled by increasing the fiber number, adjusting the strain rate and connection modes. For the single-fiber based NGs, the output voltage is 17 mV and the current density is about 0.09 μA·cm^-2, and the electrical output is enhanced greatly compared to that of previous similar micro-fiber based NGs. Compared with the single-fiber based NGs, the output current of the multi-fiber based NGs made of 200 carbon fibers increased 100-fold. An output voltage of 18 mV and current of 35 nA are generated from the multi-fiber based NGs. The electrical energy generated by the NGs is enough to power a practical device. The developed novel NGs can be used for smart textile structures, wearable and self-powered nanodevices.展开更多
Piezoelectric nanogenerators(NGs)have been developed for converting mechanical energy into electric energy using ZnO,GaN,ZnSnO3,and PZT nanowires.Due to the unique polarity and non-central symmetry of the wurtzite str...Piezoelectric nanogenerators(NGs)have been developed for converting mechanical energy into electric energy using ZnO,GaN,ZnSnO3,and PZT nanowires.Due to the unique polarity and non-central symmetry of the wurtzite structure,a composite made of using the conical shaped nanowires are used as a simple,cost-effective,and scalable nanogenerator.Based on the finite element methods,the output voltage of the nanogenerator is modeled numerically.The key factors:the spatial location of nanowires,length and dip angle of nanowires,thickness of NG devices,and the physical properties of the polymer inside NGs,which affect the output voltage are studied.The results provide guidance for optimization the output of piezoelectric nanogenerators.展开更多
基金Supported by the National Natural Science Foundation of China （50977080） the Science ＆ Technology Department Project of Hunan Province （2010F J3116） the Education Department Project of Hunan Province （ 10A 114）
文摘A new method of switched reluctance wind power generation position sensorless based on DFNN by FEA was proposed, Through current and magnetic linkage to get the angle of SRG rotor position, the nonlinear mapping of cur- rent-magnetic linkage-angle was built, By training these sample data from FEA, the angle of SRG rotor position was replaced by the output of DFNN to achieve SRG position sensorless. Simulation results show that the error between actual rotor position and estimate rotor position is small; SRG can commutate with great accuracy; and the output voltage of SRG wind power system under variable wind speed is essentially constant.
基金AcknowledgementsThis work was supported by the National Major Research Program of China （No. 2013CB932602）,the Major Project of International Cooperation and Exchanges （No. 2012DFA50990）, the National Natural Science Foundation of China （NSFC） （Nos. 51172022, 51232001, and 51372020）, the Fundamental Research Funds for Central Universities, the Program for New Century Excellent Talents in University, Beijing Higher Education Young Elite Teacher Project, the Programme of Introducing Talents of Discipline to Universities, and Program for Changjiang Scholars and Innovative Research Teams in University.
文摘We present a novel, low-cost approach to fabricate flexible piezoelectric nano- generators （NGs） consisting of ZnO nanowires （NWs） on carbon fibers and foldable Au-coated ZnO NWs on paper. By using such designed structure of the NGs, the radial ZnO NWs on a cylindrical fiber can be utilized fully and the electrical output of the NG is improved. The electrical output behavior of the NGs can be optionally controlled by increasing the fiber number, adjusting the strain rate and connection modes. For the single-fiber based NGs, the output voltage is 17 mV and the current density is about 0.09 μA·cm^-2, and the electrical output is enhanced greatly compared to that of previous similar micro-fiber based NGs. Compared with the single-fiber based NGs, the output current of the multi-fiber based NGs made of 200 carbon fibers increased 100-fold. An output voltage of 18 mV and current of 35 nA are generated from the multi-fiber based NGs. The electrical energy generated by the NGs is enough to power a practical device. The developed novel NGs can be used for smart textile structures, wearable and self-powered nanodevices.
文摘Piezoelectric nanogenerators(NGs)have been developed for converting mechanical energy into electric energy using ZnO,GaN,ZnSnO3,and PZT nanowires.Due to the unique polarity and non-central symmetry of the wurtzite structure,a composite made of using the conical shaped nanowires are used as a simple,cost-effective,and scalable nanogenerator.Based on the finite element methods,the output voltage of the nanogenerator is modeled numerically.The key factors:the spatial location of nanowires,length and dip angle of nanowires,thickness of NG devices,and the physical properties of the polymer inside NGs,which affect the output voltage are studied.The results provide guidance for optimization the output of piezoelectric nanogenerators.
