This paper introduces present state of industrialization development in flue gas desulfuration, including technological selection, state of design and contracting capability, localization of equipment, etc. in China. ...This paper introduces present state of industrialization development in flue gas desulfuration, including technological selection, state of design and contracting capability, localization of equipment, etc. in China. It points out main problems currently existed and presents proposals on promotion of desulfuration technology with selfowned intellectual property right, perfection of demonstrative projects and pushing forward localization of desulfuration equipment.展开更多
This paper briefs the current clean production and consumption levels of coal in China and the pollution harmbrought to the atmospheric environment, present status and orientation of clean coal technology development ...This paper briefs the current clean production and consumption levels of coal in China and the pollution harmbrought to the atmospheric environment, present status and orientation of clean coal technology development in Chinacoal industry, progress and perspective of clean coal power generation technology in China, as well as application andmarket of flue gas desulphurization technology in coal-fired power plants.[展开更多
In this paper, a detailed thermodynamic analysis of the pure low-temperature waste heat recovery generation system is presented. The parameters affecting the system performance are compared to obtain the most signific...In this paper, a detailed thermodynamic analysis of the pure low-temperature waste heat recovery generation system is presented. The parameters affecting the system performance are compared to obtain the most significant ones; furthermore, parameter values are optimized for the largest power generating capability of the system. It is found that the most important parameters are inlet flue gas temperature, steam pressure and the pinch point temperature difference. There is an optimal superheated steam pressure value for giving the maximum generation power per unit flue gas. With the increase of inlet flue gas temperature, the generating power increases and the optimized steam pressure rises as well. However, with increase in pinch point temperature difference, the generating power decreases and the optimized steam pressure decreases as well. The theoretical calculation provides a theoretical basis for the parameters optimization in the design of the pure low-temperature waste heat recovery eeneration swtem展开更多
For Finland, carbon dioxide mineralisation was identified as the only option for CCS （carbon capture and storage） application. Unfortunately it has not been embraced by the power sector. One interesting source-sink ...For Finland, carbon dioxide mineralisation was identified as the only option for CCS （carbon capture and storage） application. Unfortunately it has not been embraced by the power sector. One interesting source-sink combination, however, is formed by magnesium silicate resources at Vammala, located -85 km east of the 565 MWe coal-fired Meri-Pori Power Plant on the country＇s southwest coast. This paper assesses mineral sequestration of Meri-Pori power plant CO2, using Vammala mineral resources and the mineralisation process under development at Abo Akademi University. That process implies Mg（OH）E production from magnesium silicate-based rock, followed by gas/solid carbonation of the Mg（OH）2 in a pressurised fluidised bed. Reported are results on experimental work, i.e., Mg（OH）2 production, with rock from locations close to Meri-Pori. Results suggest a total CO2 fixation capacity -50 Mt CO2 for the Vammala site, although production of Mg（OH）2 from rock from the site is challenging. Finally, as mineralisation could be directly applied to flue gases without CO2 pre-capture, we report from experimental work on carbonation of Mg（OH）2 with CO2 and CO2-SO2-O2 gas mixtures. Results show that SO2 readily reacts with Mg（OH）2, providing an opportunity to simultaneously capture SO2 and CO2, which could make separate flue gas desulphurisation redundant.展开更多
文摘This paper introduces present state of industrialization development in flue gas desulfuration, including technological selection, state of design and contracting capability, localization of equipment, etc. in China. It points out main problems currently existed and presents proposals on promotion of desulfuration technology with selfowned intellectual property right, perfection of demonstrative projects and pushing forward localization of desulfuration equipment.
文摘This paper briefs the current clean production and consumption levels of coal in China and the pollution harmbrought to the atmospheric environment, present status and orientation of clean coal technology development in Chinacoal industry, progress and perspective of clean coal power generation technology in China, as well as application andmarket of flue gas desulphurization technology in coal-fired power plants.[
文摘In this paper, a detailed thermodynamic analysis of the pure low-temperature waste heat recovery generation system is presented. The parameters affecting the system performance are compared to obtain the most significant ones; furthermore, parameter values are optimized for the largest power generating capability of the system. It is found that the most important parameters are inlet flue gas temperature, steam pressure and the pinch point temperature difference. There is an optimal superheated steam pressure value for giving the maximum generation power per unit flue gas. With the increase of inlet flue gas temperature, the generating power increases and the optimized steam pressure rises as well. However, with increase in pinch point temperature difference, the generating power decreases and the optimized steam pressure decreases as well. The theoretical calculation provides a theoretical basis for the parameters optimization in the design of the pure low-temperature waste heat recovery eeneration swtem
文摘For Finland, carbon dioxide mineralisation was identified as the only option for CCS （carbon capture and storage） application. Unfortunately it has not been embraced by the power sector. One interesting source-sink combination, however, is formed by magnesium silicate resources at Vammala, located -85 km east of the 565 MWe coal-fired Meri-Pori Power Plant on the country＇s southwest coast. This paper assesses mineral sequestration of Meri-Pori power plant CO2, using Vammala mineral resources and the mineralisation process under development at Abo Akademi University. That process implies Mg（OH）E production from magnesium silicate-based rock, followed by gas/solid carbonation of the Mg（OH）2 in a pressurised fluidised bed. Reported are results on experimental work, i.e., Mg（OH）2 production, with rock from locations close to Meri-Pori. Results suggest a total CO2 fixation capacity -50 Mt CO2 for the Vammala site, although production of Mg（OH）2 from rock from the site is challenging. Finally, as mineralisation could be directly applied to flue gases without CO2 pre-capture, we report from experimental work on carbonation of Mg（OH）2 with CO2 and CO2-SO2-O2 gas mixtures. Results show that SO2 readily reacts with Mg（OH）2, providing an opportunity to simultaneously capture SO2 and CO2, which could make separate flue gas desulphurisation redundant.
