In the current studies a miniature silicon wafer fuel cell(FC) using L-ascorbic acid as fuel was developed. The cell employs L-ascorbic acid and air as reactants and a thin polymer electrolyte as a separator. Inductiv...In the current studies a miniature silicon wafer fuel cell(FC) using L-ascorbic acid as fuel was developed. The cell employs L-ascorbic acid and air as reactants and a thin polymer electrolyte as a separator. Inductively coupled plasma(ICP) silicon etching was employed to fabricate high aspect-ratio columns on the silicon substrate to increase the surface area. A thin platinum layer deposited directly on the silicon surface by the sputtering was used as the catalyst layer for L-ascorbic acid electro-oxidation. Cyclic voltammetry shows that the oxidation of L-ascorbic acid on the sputtered platinum layer is irreversible and that the onset potentials for the oxidation of L-ascorbic acid are from 0.27 V to 0.35 V versus an Ag/AgCl reference electrode. It is found that at the room temperature,with 1 mol/L L-ascorbic acid/PBS(phosphate buffered solution) solution pumped to the anode at 1 ml/min flow rate and air spontaneously diffusing to the cathode as the oxidant,the maximum output power density of the cell was 1.95 mW/cm2 at a current density of 10 mA/cm2.展开更多
In this study, the oxidation rates of sulfur dioxide (SO2) in sulphuric acid solution by ozone and oxygen were compared, and the oxidation mechanism of ozone on SO2 was investigated. The results showed that the oxid...In this study, the oxidation rates of sulfur dioxide (SO2) in sulphuric acid solution by ozone and oxygen were compared, and the oxidation mechanism of ozone on SO2 was investigated. The results showed that the oxidation-reduction potential of the acidic solution was enhanced, the transformation rate of sulfuric acid to sulphuric acid was increased and the absorption driving force was improved in the presence of ozone. By comparing the amount of sulfate ions measured in the experiments and the theoretical amount of sulfate ions calculated from the amount of ozone consumed in the reaction, it can be confirmed that oxygen free radicals from dissociation of ozone are reactive as an efficient oxidant and oxygen from ozone generator participates in the reaction with SO2. 0.602 mol of effective oxygen was introduced into the reaction by one mole of ozone in 10.15 rain at sulphuric acid concentration of 3% (by mass), SO2 concentration of 1.33% (by volume) and oxygen flow rate of 1.5 L.min^-1 from ozone generator.展开更多
Porous anodic oxide films were fabricated galvanostatically on titanium alloy Ti-10V-2Fe-3Al in ammonium tartrate solution with different anodizing time.Scanning electron microscopy(SEM) and field emission scanning el...Porous anodic oxide films were fabricated galvanostatically on titanium alloy Ti-10V-2Fe-3Al in ammonium tartrate solution with different anodizing time.Scanning electron microscopy(SEM) and field emission scanning electron microscopy(FE-SEM) were used to investigate the morphology evolution of the anodic oxide film.It is shown that above the breakdown voltage,oxygen is generated with the occurrence of drums morphology.These drums grow and extrude,which yields the compression stress.Subsequently,microcracks are generated.With continuous anodizing,porous oxides form at the microcracks.Those oxides grow and connect to each other,finally replace the microcrack morphology.The depth profile of the anodic oxide film formed at 1 800 s was examined by Auger electron spectroscopy(AES).It is found that the film is divided into three layers according to the molar fractions of elements.The outer layer is incorporated by carbon,which may come from electrolyte solution.The thickness of the outer layer is approximately 0.2-0.3 μm.The molar fractions of elements in the intermediate layer are extraordinarily stable,while those in the inner layer vary significantly with sputtering depth.The thicknesses of the intermediate layer and the inner layer are 2 μm and 1.0-1.5 μm,respectively.Moreover,the growth mechanism of porous anodic oxide films in neutral tartrate solution was proposed.展开更多
A new method for the determination of baicalin with HPLC-CL was developed. The method was based on the chemiluminescence reaction between KMnO4 and baicalin sensitized from HCHO. The linear range was 3.7?0-6~9.8?0-5...A new method for the determination of baicalin with HPLC-CL was developed. The method was based on the chemiluminescence reaction between KMnO4 and baicalin sensitized from HCHO. The linear range was 3.7?0-6~9.8?0-5 mol/L with detection limit of 1.7?0-6 mol/L and the relative standard deviation was 2.5 % (Cs=6.6?0-5 mol/L, n=5). The method has been applied to the determination of baicalin in oral administration, injection, Scutellariae radix and granules with good results.展开更多
Multiple-effect membrane distillation (MEMD) process for enriching semi-volatile organic acids from their individual aqueous solutions was performed by using a hollow fiber-based air gap membrane distillation (AGMD...Multiple-effect membrane distillation (MEMD) process for enriching semi-volatile organic acids from their individual aqueous solutions was performed by using a hollow fiber-based air gap membrane distillation (AGMD) module with the function of internal heat recovery. Aqueous solutions of glyoxylic acid, glycolic acid, lactic acid, pyrnvic acid, malonic acid and glutaric acid were used as model feed. For a feed of 1% (mass fraction), each acid could be enriched for 8--20 times, which depended on the surface tension of the concentrate. The operation performance of MEMD process was characterized by permeation flux J, performance ratio PR and acid rejection rate R. The effects of cold feed-in temperature, heated feed-in temperature, feed-in volumetric flow rate and feed-in concen- tration on MEMD performance were experimentally evaluated. Maximum values of J, PR and R were 4.8 L/(h-m2), 9.84 and 99.93%, respectively. Moreover, MEMD process demonstrated a fairly good stability in a long-term experiment lasting for 30 d when aqueous solution of 4% (mass fraction) lactic acid was used as a feed.展开更多
Cytosolic phospholipase A2α (cPLA2α) catalyzes the release of arachidonic acid (AA) and lysophosphoglyceride from membrane phospholipids. Although the roles of AA and eicosanoids in cellular viability, the proce...Cytosolic phospholipase A2α (cPLA2α) catalyzes the release of arachidonic acid (AA) and lysophosphoglyceride from membrane phospholipids. Although the roles of AA and eicosanoids in cellular viability, the processes of inflammation and cancer cell development have been extensively studied, the function of cPLA2α in the processes of inflammation and cancer cell development is not clear. This review summarizes published evidences for the biochemical properties and regulatory mechanisms of cPLA2α. The potential for use of cPLA2α as a novel diagnostic target and predictive biomarker for tumors is also discussed.展开更多
This work describes the separation and purification of lactic acid from diluted solution by HSPE (hybrid short path evaporation) and RD (reactive distillation) as coupled process. The results showed that it is pos...This work describes the separation and purification of lactic acid from diluted solution by HSPE (hybrid short path evaporation) and RD (reactive distillation) as coupled process. The results showed that it is possible to increase lactic acid concentration up to 4.7 times higher than the raw material concentration.展开更多
Fermented chile pepper mash (Capsicum annuum cv. Mesilla Cayenne) is a major industrial food product in New Mexico. The fermentation of chile pepper mash depends on temperature, acidity, salt concentration, dissolve...Fermented chile pepper mash (Capsicum annuum cv. Mesilla Cayenne) is a major industrial food product in New Mexico. The fermentation of chile pepper mash depends on temperature, acidity, salt concentration, dissolved air, available carbohydrates and enzymes. The objective of this study was to evaluate the effects of the addition of calcium chloride (CaCI2) on the microbial characteristics of the pepper mash fermentation. Nine five gallon buckets were prepared with pepper that had been washed and ground by the manufacturer, each with 15% sodium chloride added. The buckets were allotted randomly to 1 of 3 treatments. The treatments included no CaCl2, 0.2% CaCl2 and 0.4% CaCl2 added to the pepper mash. Samples were stored at room temperature and sampled over a 3 months period to examine changes in the microflora. Chile mash samples were serially diluted in butterfield's phosphate buffer for microbial enumeration. Aerobic plate counts were conducted by pour plating with an overlay. Petrifilms were used for E. coil/coliform counts and Enterobacteriaceae. Yeasts and molds were surface plated on Rose Bengal Chloramphenicol agar while streptococci and lactobacilli were plated onto M17 and acidified MRS respectively. Aerobic plate counts, coliforms, E. coli, Enterobacteriaceae, yeast, mold, lactobacilli, and streptococci were not affected by CaCl2 level. The addition of 0.4% CaCl2 was found to have no effect on the chile pepper mash fermentation.展开更多
Objective:This study was aimed to research the feasibility of ATP-bioluminescence assay(ATP-TCA) guiding the treatment on recurrent non-small cell lung cancer(NSCLC) combined with malignant pleural effusion.Methods:We...Objective:This study was aimed to research the feasibility of ATP-bioluminescence assay(ATP-TCA) guiding the treatment on recurrent non-small cell lung cancer(NSCLC) combined with malignant pleural effusion.Methods:We collected 30 pleural fluid samples which were approved to be positive by cytology from recurrent NSCLC patients.These cells were cocultured with chemotherapy medicines,single agent or drugs combination.Five drug concentrations,two parallel holes were examined in vitro for 4 days,the results were measured by adding luciferase-fluorescein working system and luminescence analyzer.We applied chemotherapy medicines according to the results in vitro of ATP-TCA.Results:There were differences among drug sensitivities of individuals.All the samples could be evaluated.Effective single drugs included cisplatinum,mitomycin C,doxorubicin,and pemetrexed disodium;sensitive drugs in the combination therapy were gemcitabine plus cisplatin,vinorelbine plus cisplatin,paclitaxel plus cisplatin,docetaxel plus cisplatin,and mitomycin C,vindesine plus cisplatin,in which gemcitabine + cisplatin(GEM + DDP) in vitro was the most efficient program.Conclusion:ATP-TCA in vitro sensitivity assay is rapid,reliable,and simple to guide the treatment of recurrent NSCLC with malignant pleural effusion,and can help clinicians to make the individual chemotherapy program.展开更多
基金the National Natural Science Foundation of China (No. 30670535)the Program for New Century Excellent Talents in University (No. NCET-07-0752), China
文摘In the current studies a miniature silicon wafer fuel cell(FC) using L-ascorbic acid as fuel was developed. The cell employs L-ascorbic acid and air as reactants and a thin polymer electrolyte as a separator. Inductively coupled plasma(ICP) silicon etching was employed to fabricate high aspect-ratio columns on the silicon substrate to increase the surface area. A thin platinum layer deposited directly on the silicon surface by the sputtering was used as the catalyst layer for L-ascorbic acid electro-oxidation. Cyclic voltammetry shows that the oxidation of L-ascorbic acid on the sputtered platinum layer is irreversible and that the onset potentials for the oxidation of L-ascorbic acid are from 0.27 V to 0.35 V versus an Ag/AgCl reference electrode. It is found that at the room temperature,with 1 mol/L L-ascorbic acid/PBS(phosphate buffered solution) solution pumped to the anode at 1 ml/min flow rate and air spontaneously diffusing to the cathode as the oxidant,the maximum output power density of the cell was 1.95 mW/cm2 at a current density of 10 mA/cm2.
文摘In this study, the oxidation rates of sulfur dioxide (SO2) in sulphuric acid solution by ozone and oxygen were compared, and the oxidation mechanism of ozone on SO2 was investigated. The results showed that the oxidation-reduction potential of the acidic solution was enhanced, the transformation rate of sulfuric acid to sulphuric acid was increased and the absorption driving force was improved in the presence of ozone. By comparing the amount of sulfate ions measured in the experiments and the theoretical amount of sulfate ions calculated from the amount of ozone consumed in the reaction, it can be confirmed that oxygen free radicals from dissociation of ozone are reactive as an efficient oxidant and oxygen from ozone generator participates in the reaction with SO2. 0.602 mol of effective oxygen was introduced into the reaction by one mole of ozone in 10.15 rain at sulphuric acid concentration of 3% (by mass), SO2 concentration of 1.33% (by volume) and oxygen flow rate of 1.5 L.min^-1 from ozone generator.
基金Project(50571003) supported by the National Natural Science Foundation of China
文摘Porous anodic oxide films were fabricated galvanostatically on titanium alloy Ti-10V-2Fe-3Al in ammonium tartrate solution with different anodizing time.Scanning electron microscopy(SEM) and field emission scanning electron microscopy(FE-SEM) were used to investigate the morphology evolution of the anodic oxide film.It is shown that above the breakdown voltage,oxygen is generated with the occurrence of drums morphology.These drums grow and extrude,which yields the compression stress.Subsequently,microcracks are generated.With continuous anodizing,porous oxides form at the microcracks.Those oxides grow and connect to each other,finally replace the microcrack morphology.The depth profile of the anodic oxide film formed at 1 800 s was examined by Auger electron spectroscopy(AES).It is found that the film is divided into three layers according to the molar fractions of elements.The outer layer is incorporated by carbon,which may come from electrolyte solution.The thickness of the outer layer is approximately 0.2-0.3 μm.The molar fractions of elements in the intermediate layer are extraordinarily stable,while those in the inner layer vary significantly with sputtering depth.The thicknesses of the intermediate layer and the inner layer are 2 μm and 1.0-1.5 μm,respectively.Moreover,the growth mechanism of porous anodic oxide films in neutral tartrate solution was proposed.
文摘A new method for the determination of baicalin with HPLC-CL was developed. The method was based on the chemiluminescence reaction between KMnO4 and baicalin sensitized from HCHO. The linear range was 3.7?0-6~9.8?0-5 mol/L with detection limit of 1.7?0-6 mol/L and the relative standard deviation was 2.5 % (Cs=6.6?0-5 mol/L, n=5). The method has been applied to the determination of baicalin in oral administration, injection, Scutellariae radix and granules with good results.
文摘Multiple-effect membrane distillation (MEMD) process for enriching semi-volatile organic acids from their individual aqueous solutions was performed by using a hollow fiber-based air gap membrane distillation (AGMD) module with the function of internal heat recovery. Aqueous solutions of glyoxylic acid, glycolic acid, lactic acid, pyrnvic acid, malonic acid and glutaric acid were used as model feed. For a feed of 1% (mass fraction), each acid could be enriched for 8--20 times, which depended on the surface tension of the concentrate. The operation performance of MEMD process was characterized by permeation flux J, performance ratio PR and acid rejection rate R. The effects of cold feed-in temperature, heated feed-in temperature, feed-in volumetric flow rate and feed-in concen- tration on MEMD performance were experimentally evaluated. Maximum values of J, PR and R were 4.8 L/(h-m2), 9.84 and 99.93%, respectively. Moreover, MEMD process demonstrated a fairly good stability in a long-term experiment lasting for 30 d when aqueous solution of 4% (mass fraction) lactic acid was used as a feed.
文摘Cytosolic phospholipase A2α (cPLA2α) catalyzes the release of arachidonic acid (AA) and lysophosphoglyceride from membrane phospholipids. Although the roles of AA and eicosanoids in cellular viability, the processes of inflammation and cancer cell development have been extensively studied, the function of cPLA2α in the processes of inflammation and cancer cell development is not clear. This review summarizes published evidences for the biochemical properties and regulatory mechanisms of cPLA2α. The potential for use of cPLA2α as a novel diagnostic target and predictive biomarker for tumors is also discussed.
文摘This work describes the separation and purification of lactic acid from diluted solution by HSPE (hybrid short path evaporation) and RD (reactive distillation) as coupled process. The results showed that it is possible to increase lactic acid concentration up to 4.7 times higher than the raw material concentration.
文摘Fermented chile pepper mash (Capsicum annuum cv. Mesilla Cayenne) is a major industrial food product in New Mexico. The fermentation of chile pepper mash depends on temperature, acidity, salt concentration, dissolved air, available carbohydrates and enzymes. The objective of this study was to evaluate the effects of the addition of calcium chloride (CaCI2) on the microbial characteristics of the pepper mash fermentation. Nine five gallon buckets were prepared with pepper that had been washed and ground by the manufacturer, each with 15% sodium chloride added. The buckets were allotted randomly to 1 of 3 treatments. The treatments included no CaCl2, 0.2% CaCl2 and 0.4% CaCl2 added to the pepper mash. Samples were stored at room temperature and sampled over a 3 months period to examine changes in the microflora. Chile mash samples were serially diluted in butterfield's phosphate buffer for microbial enumeration. Aerobic plate counts were conducted by pour plating with an overlay. Petrifilms were used for E. coil/coliform counts and Enterobacteriaceae. Yeasts and molds were surface plated on Rose Bengal Chloramphenicol agar while streptococci and lactobacilli were plated onto M17 and acidified MRS respectively. Aerobic plate counts, coliforms, E. coli, Enterobacteriaceae, yeast, mold, lactobacilli, and streptococci were not affected by CaCl2 level. The addition of 0.4% CaCl2 was found to have no effect on the chile pepper mash fermentation.
文摘Objective:This study was aimed to research the feasibility of ATP-bioluminescence assay(ATP-TCA) guiding the treatment on recurrent non-small cell lung cancer(NSCLC) combined with malignant pleural effusion.Methods:We collected 30 pleural fluid samples which were approved to be positive by cytology from recurrent NSCLC patients.These cells were cocultured with chemotherapy medicines,single agent or drugs combination.Five drug concentrations,two parallel holes were examined in vitro for 4 days,the results were measured by adding luciferase-fluorescein working system and luminescence analyzer.We applied chemotherapy medicines according to the results in vitro of ATP-TCA.Results:There were differences among drug sensitivities of individuals.All the samples could be evaluated.Effective single drugs included cisplatinum,mitomycin C,doxorubicin,and pemetrexed disodium;sensitive drugs in the combination therapy were gemcitabine plus cisplatin,vinorelbine plus cisplatin,paclitaxel plus cisplatin,docetaxel plus cisplatin,and mitomycin C,vindesine plus cisplatin,in which gemcitabine + cisplatin(GEM + DDP) in vitro was the most efficient program.Conclusion:ATP-TCA in vitro sensitivity assay is rapid,reliable,and simple to guide the treatment of recurrent NSCLC with malignant pleural effusion,and can help clinicians to make the individual chemotherapy program.