Homogeneous oxidation using an oil-soluble oxidant, tert-amyl hydroperoxide （TAHP）, for ultra-deep desulfurization was performed under mild conditions in the presence of molybdenum oxide catalysts. Dibenzothio- phe...Homogeneous oxidation using an oil-soluble oxidant, tert-amyl hydroperoxide （TAHP）, for ultra-deep desulfurization was performed under mild conditions in the presence of molybdenum oxide catalysts. Dibenzothio- phene （DBT）, benzothiophene （BT） and 4, 6-dimethyl-dibenzothiophene （DMDBT）, which are the refractory sulfur compounds for hydrodesulfurization （HDS）, were employed as model substrates for a simulated diesel fuel. Activity of molybdenum oxide supported on a macroporous weak acidic resin was investigated. The mass conversion of DBT reached near 100% at 90℃ and a TAHP/DBT molar ratio of 3 with 1% of molybdenum oxide supported on Amberlite IRC-748 resin for 1 h. It was further found that the activities of the model substrates decreased in the or- der of DMDBT 〉DBT 〉BT. In the flow oxidation using TAHP as the oxidant, mass conversion of DBT increased remarkably from 61.3% to 98.5% when dropping the weight hourly space velocity （WHSV） from 40 h^-1 to 10 h^-1. A series of experiments dealt with selectivity of this oxidation using TAHP revealed that the model unsaturated compounds, i.e. 4, 6, 8-trimethyl-2-nonylene, and 2-methylnaphthalene did not affect the oxidation of DBT. Carbazole had nearly no effect on the conversion of DBT using TAHP, but had some influence on the one using tert-butyl hydroperoxide （TBHP）. The mass conversion of DBT decreased remarkably from 75.2% to 3.6% when the content of carbazole increased from 0 to 500μg·g^-1. In the flow oxidation using TAHP as the oxidant, the concentration of DBT in model fuels was reduced from 500 μg·g^-1 to 7.2 μg·g^-1 at WHSV of 10 h^-1, and then reduced to 3.8 μg·g^-1 by adsorntion of Al2O3.展开更多
In order to design the relief system size of di-tert-butyl peroxide(DTBP) storage tanks,the runaway re-action of DTBP was simulated by accelerating rate calorimeter(ARC).The results indicated that under adiabatic cond...In order to design the relief system size of di-tert-butyl peroxide(DTBP) storage tanks,the runaway re-action of DTBP was simulated by accelerating rate calorimeter(ARC).The results indicated that under adiabatic conditions the initial exothermic temperature was 102.6 ℃,the maximum self-heating rate was 3.095×107 ℃·min-1,the maximum self-heating temperature was 375.9 ℃,and the pressure produced by unit mass was 4.512 MPa·g-1.Judged by ARC test,the emergency relief system for DTBP was a hybrid system.Based on Design Institute for Emergency Relief System(DIERS) method,the releasing mass flow rate W was determined by Leung methods,and the mass velocity G was calculated by two modified Omega methods.The two relief sizes calculated by monograph Omega method and arithmetic Omega method are close,with only 0.63% relative error.The monograph Omega method is more convenient to apply.展开更多
The combination of relatively low-cost ionic liquids, simple copper salt, and terminal oxidant tert-butyl hydroperoxide provided an efficient and environmentally friendly approach to the preparation of ionone-like die...The combination of relatively low-cost ionic liquids, simple copper salt, and terminal oxidant tert-butyl hydroperoxide provided an efficient and environmentally friendly approach to the preparation of ionone-like dienones. Six pyridinium ionic liquids were evaluated in allylic oxidation of α-ionone and β-ionone. The 60%-70% yields of 3-oxo-α-ionone were obtained with 0.02 0.20 mmol of CuCl2·2H2O as catalyst, 3-5 mmol of tert-butyl hydroperoxide as oxidant and 1 g of [Bpy]PF6 as solvent for 4-20 h at 60℃. The facile recovery and recycle of catalyst were also achieved. More significantly, peculiar phase behaviors of [Bpy]PF6 and [Epy]PF6 offered the catalytic system advantages of homogeneous reaction and heterogeneous separation. Scanning electron microscope （SEM） images of [Bpy]PF6 provided evidences for the behaviors. Transmission electron microscope （TEM） micrographs showed copper salt nanoparticles catalyst formed and stabilized in pyridinium ionic liquids.展开更多
In this manuscript, a series of catalyst SG n-[VVO2-PAMAM-MSA] (SG silica gel, PAMAM polyamidoamine, MSA 5-methyl salicylaldehyde, n=0, 1, 2, 3) was prepared and their structures were fully characterized by Fourier tr...In this manuscript, a series of catalyst SG n-[VVO2-PAMAM-MSA] (SG silica gel, PAMAM polyamidoamine, MSA 5-methyl salicylaldehyde, n=0, 1, 2, 3) was prepared and their structures were fully characterized by Fourier transform-infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and inductive coupled plasma emission spectrometer (ICP) etc. XPS revealed that the metal V and SG n-PAMAM-MSA combined more closely after the formation of Schiff base derivatives. Their catalytic activities for oxidation of dibenzothiophene were evaluated using tert-butyl hydroperoxide as oxidant. The results showed that the catalyst SG 2.0-[VVO2-PAMAM-MSA] presented good catalytic activity and recycling time. Meanwhile, the optimal condition for the catalytic oxidation of SG 2.0-[VVO2-PAMAM-MSA] was also investigated, which showed that when the oxidation temperature was 90 °C, time was 60 min, the O/S was 3:1, and the mass content of catalyst was 1%, the rate of desulfurization could reach 85.2%. Moreover, the catalyst can be recycled several times without significant decline in catalytic activity.展开更多
This article refers to the study on the performance of mesoporous silica used as the catalyst for oxidative desulfurization reactions. The test results revealed that under mild reaction conditions using tert-butyl hyd...This article refers to the study on the performance of mesoporous silica used as the catalyst for oxidative desulfurization reactions. The test results revealed that under mild reaction conditions using tert-butyl hydroperoxide as the oxidizing agent the content of dibenzothiophene(DBT) contained in oil samples could be reduced from 5000 ppm to less than 5 ppm. Furthermore,the mesoporous silica material can be easily regenerated and recycled.展开更多
Heterogeneous oxidation of cyclohexane by tert-butyl hydroperoxide (TBHP) was carried out over ZSM-5 catalysts with different Si/Al ratios in ionic liquids and organic molecular solvents. Higher yield and selec-tivity...Heterogeneous oxidation of cyclohexane by tert-butyl hydroperoxide (TBHP) was carried out over ZSM-5 catalysts with different Si/Al ratios in ionic liquids and organic molecular solvents. Higher yield and selec-tivity of the desired products were found in ionic liquids than in molecular solvents. The conversion of cyclohexane exhibits a decrease from 15.8% to 10.8% with the increase of Si/Al ratio of the HZSM-5 catalyst, and all the cata-lysts exhibit good selectivity of monofunctional oxidation products at around 97%. The activity of catalyst is found strongly dependent on the alkyl chain length of ionic liquid.展开更多
A convergent construction of [2,3]-fused indoline tetrahydropyridazines via an I2/tert-butyl hydroperoxide(TBHP) catalyzed three-component dearomative oxidative coupling of indoles, hydrazines and acetophenone was est...A convergent construction of [2,3]-fused indoline tetrahydropyridazines via an I2/tert-butyl hydroperoxide(TBHP) catalyzed three-component dearomative oxidative coupling of indoles, hydrazines and acetophenone was established in moderate to good yields. This protocol provides a new approach for the synthesis of these biologically interesting fused indolines.展开更多
Co-or Mn-substituted LTL zeolites were hydrothermally synthesized by a novel organic-ligand-assisted method.XRD,UVVis DRS,XPS,and EPR techniques verified that the Co and Mn ions were incorporated into the zeolite fram...Co-or Mn-substituted LTL zeolites were hydrothermally synthesized by a novel organic-ligand-assisted method.XRD,UVVis DRS,XPS,and EPR techniques verified that the Co and Mn ions were incorporated into the zeolite framework.No organic species were retained in as-synthesized Co or Mn-LTL zeolites,which resulted in porous materials without calcination.In the oxidation of cyclohexane with tert-butyl hydroperoxide(TBHP),the Co-LTL and Mn-LTL gave a 40%–48%KA oil(cyclohexanone and cyclohexanol)yield as well as nearly 100%TBHP conversion under mild reaction conditions.The reactions were confirmed to be heterogeneous and to have proceeded catalytically.No loss of catalytic activity or leaching of metal active sites ions were observed during 4 reuses.展开更多
基金Supported by Program for Changjiang Scholars and Innovative Research Team in University
文摘Homogeneous oxidation using an oil-soluble oxidant, tert-amyl hydroperoxide （TAHP）, for ultra-deep desulfurization was performed under mild conditions in the presence of molybdenum oxide catalysts. Dibenzothio- phene （DBT）, benzothiophene （BT） and 4, 6-dimethyl-dibenzothiophene （DMDBT）, which are the refractory sulfur compounds for hydrodesulfurization （HDS）, were employed as model substrates for a simulated diesel fuel. Activity of molybdenum oxide supported on a macroporous weak acidic resin was investigated. The mass conversion of DBT reached near 100% at 90℃ and a TAHP/DBT molar ratio of 3 with 1% of molybdenum oxide supported on Amberlite IRC-748 resin for 1 h. It was further found that the activities of the model substrates decreased in the or- der of DMDBT 〉DBT 〉BT. In the flow oxidation using TAHP as the oxidant, mass conversion of DBT increased remarkably from 61.3% to 98.5% when dropping the weight hourly space velocity （WHSV） from 40 h^-1 to 10 h^-1. A series of experiments dealt with selectivity of this oxidation using TAHP revealed that the model unsaturated compounds, i.e. 4, 6, 8-trimethyl-2-nonylene, and 2-methylnaphthalene did not affect the oxidation of DBT. Carbazole had nearly no effect on the conversion of DBT using TAHP, but had some influence on the one using tert-butyl hydroperoxide （TBHP）. The mass conversion of DBT decreased remarkably from 75.2% to 3.6% when the content of carbazole increased from 0 to 500μg·g^-1. In the flow oxidation using TAHP as the oxidant, the concentration of DBT in model fuels was reduced from 500 μg·g^-1 to 7.2 μg·g^-1 at WHSV of 10 h^-1, and then reduced to 3.8 μg·g^-1 by adsorntion of Al2O3.
文摘In order to design the relief system size of di-tert-butyl peroxide(DTBP) storage tanks,the runaway re-action of DTBP was simulated by accelerating rate calorimeter(ARC).The results indicated that under adiabatic conditions the initial exothermic temperature was 102.6 ℃,the maximum self-heating rate was 3.095×107 ℃·min-1,the maximum self-heating temperature was 375.9 ℃,and the pressure produced by unit mass was 4.512 MPa·g-1.Judged by ARC test,the emergency relief system for DTBP was a hybrid system.Based on Design Institute for Emergency Relief System(DIERS) method,the releasing mass flow rate W was determined by Leung methods,and the mass velocity G was calculated by two modified Omega methods.The two relief sizes calculated by monograph Omega method and arithmetic Omega method are close,with only 0.63% relative error.The monograph Omega method is more convenient to apply.
基金Supported by the National Natural Science Foundation of China （20472057）
文摘The combination of relatively low-cost ionic liquids, simple copper salt, and terminal oxidant tert-butyl hydroperoxide provided an efficient and environmentally friendly approach to the preparation of ionone-like dienones. Six pyridinium ionic liquids were evaluated in allylic oxidation of α-ionone and β-ionone. The 60%-70% yields of 3-oxo-α-ionone were obtained with 0.02 0.20 mmol of CuCl2·2H2O as catalyst, 3-5 mmol of tert-butyl hydroperoxide as oxidant and 1 g of [Bpy]PF6 as solvent for 4-20 h at 60℃. The facile recovery and recycle of catalyst were also achieved. More significantly, peculiar phase behaviors of [Bpy]PF6 and [Epy]PF6 offered the catalytic system advantages of homogeneous reaction and heterogeneous separation. Scanning electron microscope （SEM） images of [Bpy]PF6 provided evidences for the behaviors. Transmission electron microscope （TEM） micrographs showed copper salt nanoparticles catalyst formed and stabilized in pyridinium ionic liquids.
基金Supported by the National Natural Science Foundation of China （20901063） the Natural Science Foundation of Hubei Province （2011CDB221）
文摘In this manuscript, a series of catalyst SG n-[VVO2-PAMAM-MSA] (SG silica gel, PAMAM polyamidoamine, MSA 5-methyl salicylaldehyde, n=0, 1, 2, 3) was prepared and their structures were fully characterized by Fourier transform-infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and inductive coupled plasma emission spectrometer (ICP) etc. XPS revealed that the metal V and SG n-PAMAM-MSA combined more closely after the formation of Schiff base derivatives. Their catalytic activities for oxidation of dibenzothiophene were evaluated using tert-butyl hydroperoxide as oxidant. The results showed that the catalyst SG 2.0-[VVO2-PAMAM-MSA] presented good catalytic activity and recycling time. Meanwhile, the optimal condition for the catalytic oxidation of SG 2.0-[VVO2-PAMAM-MSA] was also investigated, which showed that when the oxidation temperature was 90 °C, time was 60 min, the O/S was 3:1, and the mass content of catalyst was 1%, the rate of desulfurization could reach 85.2%. Moreover, the catalyst can be recycled several times without significant decline in catalytic activity.
文摘This article refers to the study on the performance of mesoporous silica used as the catalyst for oxidative desulfurization reactions. The test results revealed that under mild reaction conditions using tert-butyl hydroperoxide as the oxidizing agent the content of dibenzothiophene(DBT) contained in oil samples could be reduced from 5000 ppm to less than 5 ppm. Furthermore,the mesoporous silica material can be easily regenerated and recycled.
基金Supported by the National Natural Science Foundation of China (20776037, 20425619)the Program for Changjiang Scholars and Innovative Research Teams in Universities (IRT0641)the Research Foundation of Hebei University of Science and Technology (XL200716)
文摘Heterogeneous oxidation of cyclohexane by tert-butyl hydroperoxide (TBHP) was carried out over ZSM-5 catalysts with different Si/Al ratios in ionic liquids and organic molecular solvents. Higher yield and selec-tivity of the desired products were found in ionic liquids than in molecular solvents. The conversion of cyclohexane exhibits a decrease from 15.8% to 10.8% with the increase of Si/Al ratio of the HZSM-5 catalyst, and all the cata-lysts exhibit good selectivity of monofunctional oxidation products at around 97%. The activity of catalyst is found strongly dependent on the alkyl chain length of ionic liquid.
基金supported by the Ministry of Science and Technology(2016YFA0602900)the National Natural Science Foundation of China(21372224,21232008,21420102003,21521002)+1 种基金Shandong Province Independent Innovation and Achievements Transformation of Special(2014XGC06001)the Chinese Academy of Sciences
文摘A convergent construction of [2,3]-fused indoline tetrahydropyridazines via an I2/tert-butyl hydroperoxide(TBHP) catalyzed three-component dearomative oxidative coupling of indoles, hydrazines and acetophenone was established in moderate to good yields. This protocol provides a new approach for the synthesis of these biologically interesting fused indolines.
基金supported by the National Natural Science Foundation of China(21373089,U1162102)the PhD Programs Foundation of the Ministry of Education(2012007613000)+1 种基金the National Key Technology R&D Program(2012BAE05B02)the Shanghai Leading Academic Discipline Project(B409)
文摘Co-or Mn-substituted LTL zeolites were hydrothermally synthesized by a novel organic-ligand-assisted method.XRD,UVVis DRS,XPS,and EPR techniques verified that the Co and Mn ions were incorporated into the zeolite framework.No organic species were retained in as-synthesized Co or Mn-LTL zeolites,which resulted in porous materials without calcination.In the oxidation of cyclohexane with tert-butyl hydroperoxide(TBHP),the Co-LTL and Mn-LTL gave a 40%–48%KA oil(cyclohexanone and cyclohexanol)yield as well as nearly 100%TBHP conversion under mild reaction conditions.The reactions were confirmed to be heterogeneous and to have proceeded catalytically.No loss of catalytic activity or leaching of metal active sites ions were observed during 4 reuses.
