基于变值法的船型优化层次分析法模型研究

采用层次分析法理论和变值法,提出船舶船型技术经济性层次分析方法,建立起船舶船型经济评价的层次分析数学模型。通过对珠江干线3 000吨级散货船的船型进行实例研究分析,得出了船型优化综合评价指标的排序,得出综合最优船型。在此基础上,对影响船型方案的参数进行敏感性分析。本文提出的船型方案层次分析的经济评价方法,对优化船型的优化设计具有理论研究和实用价值。

基于模糊决策理论的船型主尺度优化

采用变量法和模糊决策理论建立船型主尺度系列方案,确定船型主尺度方案技术和经济评价指标,进行评价指标的模糊决策。通过对珠江干线3 000 t级散货船船型进行实例研究分析,计算出该船型优化综合评价指标排序,获得最优船型,对影响船型方案的参数进行敏感性分析。结果表明,船型优化方案模糊决策方法可行。

连续级配碎砾石粗细颗粒区分粒径分析

粗细颗粒区分粒径是连续级配碎砾石细粒含量判别法判别渗透变形类型重要指标,但目前为止,粗细颗粒区分粒径确定方法和量值均不一致,为验证2个典型方法及量值的适宜性和符合性,统计分析了45个工程179个试样的渗透变形试验结果,结果表明,定值法中以2 mm作为粗细颗粒区分粒径时,其渗透变形类型判断结果与试验结果符合率达80.7%,远高于变值法中以(d_(70)d_(10))^(1/2)为区分粒径时的符合率54.2%。推荐以2 mm作为不均匀连续级配碎砾石粗细颗粒区分粒径。

An iterative curvelet thresholding algorithm for seismic random noise attenuation

In this paper,we explore the use of iterative curvelet thresholding for seismic random noise attenuation.A new method for combining the curvelet transform with iterative thresholding to suppress random noise is demonstrated and the issue is described as a linear inverse optimal problem using the L1 norm.Random noise suppression in seismic data is transformed into an L1 norm optimization problem based on the curvelet sparsity transform. Compared to the conventional methods such as median filter algorithm,FX deconvolution, and wavelet thresholding,the results of synthetic and field data processing show that the iterative curvelet thresholding proposed in this paper can sufficiently improve signal to noise radio（SNR） and give higher signal fidelity at the same time.Furthermore,to make better use of the curvelet transform such as multiple scales and multiple directions,we control the curvelet direction of the result after iterative curvelet thresholding to further improve the SNR.

The analysis on IP signals in TEM response based on SVD

During transient electromagnetic method （TEM） exploration of a copper mine, we detected the late-channel TEM signal reversal phenomenon （a voltage change from positive to negative） caused by the influence of the induced polarization （IP） effect, which affects the depth and precision of the TEM detection. The conventional inversion method is inefficient because it is difficult to process the data. In this paper, the Cole-Cole model is adopted to analyze the effect of Dc resistivity, chargeability, time constant, and frequency exponent on the TEM response in an homogeneous half space model. Singular Value Decomposition （SVD） is used to invert the measured TEM data, and the Dc resistivity, chargeability, time constant and frequency exponent were extracted from the measured TEM data in the mine area. The extracted parameters are used for interpreting the detection result as a supplement. This reveals why the TEM data acquired in the area has a low resolution. It was found that the DC resistivity and time constant do not significantly change the results, however, the chargeability and frequency exponent have a significant effect. Because of these influences, the SVD method is more accurate than the conventional method in the apparent resistivity profile. The area of the copper mine is confined accurately based on the SVD inverted data. The conclusion has been verified by drill and is identical to the practical geological situation.

Application of Image Fusion Methods to Cell Imaging Processing

Aim To fuse the fluorescence image and transmission image of a cell into a single image containing more information than any of the individual image. Methods Image fusion technology was applied to biological cell imaging processing. It could match the images and improve the confidence and spatial resolution of the images. Using two algorithms, double thresholds algorithm and denoising algorithm based on wavelet transform,the fluorescence image and transmission image of a Cell were merged into a composite image. Results and Conclusion The position of fluorescence and the structure of cell can be displyed in the composite image. The signal-to-noise ratio of the exultant image is improved to a large extent. The algorithms are not only useful to investigate the fluorescence and transmission images, but also suitable to observing two or more fluoascent label proes in a single cell.

Application of stiffness matrix of a beam element considering section distortion effect

According to the stationary principle of potential energy and the generalized coordinate method, a stiffness matrix of a beam element considering distortion effects is derived. Using the stiffness matrix of the beam element, a finite element program for computing thin-walled box steel beams is developed. And the program can take the section distortion and warping effects into account. The influences of diaphragm spacing on the mechanical behavior of thin-walled box beams are analyzed by the program. The numerical analysis shows that setting diaphragms have the greatest influence on the distortion normal stress, while there is very little influence on the bending normal stress. Only when the distance of adjacent diaphragms decreases to a certain value, will the distortion normal stress in the thin-walled box beam obviously reduce under the distortion load. Finally, a distortion-warping coefficient γ is introduced for simplifying the calculation of the longitudinal normal stress of thin-walled box beams. When the ratio of diaphragms adjacent space L to the maximum section dimension H is less than 2, the distortion-warping coefficient γ tends to one, which means that the distortion normal stress of the thin-walled box beam tends to zero, and the effect of the section distortion can be ignored.

铝修饰改性对SBA-15分子筛性质及催化剂性能的影响

分别采用调变pH值合成法和后处理嫁接法制备了铝修饰改性的SBA-15分子筛,通过XRD、Al核磁、N2吸附脱附、NH3-TPD等方法对改性分子筛的理化性质进行了分析表征,考察了不同的Al修饰改性方法对分子筛性质和加氢裂化催化剂性能的影响。结果表明,调变pH值合成法能够有效地对SBA-15进行Al改性,得到的Al-SBA-15分子筛具有高度有序的六方孔道结构,较好的水热稳定性。Al的引入提高了SBA-15的表面酸性,并使其在加氢裂化反应中表现出较好的中油选择性。

铁铝金属间化合物及其涂层制备的研究进展

铁铝金属间化合物凭借其较高的高温抗蠕变能力、良好的耐磨性、抗高温氧化和硫化等优点得到了广泛关注,但其具有B2、DO_(3)和A2三种晶体结构,晶型难以准确控制,且DO_(3)结构在室温下脆性高,给制备和加工带来困难。这些缺点极大地限制了铁铝金属间化合物在工业中的应用。本文总结了包括传统熔铸法和粉末冶金法等常见的铁铝金属间化合物块体材料的制备方法,并重点介绍了近年来发展起来的增材制造法和冷喷涂、热喷涂等涂层制备方法。同时,针对涂层材料中铁铝两相的反应控制这一关键问题,本文聚焦如何预判铁铝涂层界面反应中原位生成的铁铝金属间化合物的化合反应发生顺序的研究现状,分析对比了两种预判方法——相图法和焓变值计算法。其中,相图只能表征热平衡状态下的相分布,各相区域代表该温度、成分条件下所能获得的最终产物,局限性大,较难准确预测实际热处理过程中铁铝金属间化合物的出现顺序和种类。通过从热力学角度进行焓变值计算,结合Kirchhoff公式,可计算并绘制常见铁铝金属间化合物的焓变值-温度曲线,进而分析铁铝金属间化合物的反应发生顺序。焓变值计算法的理论结果与已报道的实验结果具有较高的一致性,弥补了相图法的不足,对制备特定的铁铝金属间化合物具有十分重要的指导意义。

MRO线上销售联盟及收益分配问题研究

以制造企业、网络平台和中间商作为工业品线上销售模式的构成主体,对其不同组合形成的3类销售联盟:单方联盟、两方联盟和三方联盟进行分析描述。运用Shapley值法及考虑实际收益权重的改进方法计算MRO线上销售联盟的收益分配问题。研究结果表明,三方联盟的附加收益大于等于任意两方联盟附加收益之和的一半,即可保证三方联盟中各方收益都达到最大值;任意两方联盟的附加收益增加都会使得第三方成员的边际收益减少。且基于实际责任、风险、成本及损失权益4个综合因素的变权计算方法,可使得线上销售联盟成员之间的收益分配更加公平合理,更加有利于工业品领域线上销售发展。

Numerical simulation of the effect of coupling support of bolt-mesh-anchor in deep tunnel

The mechanical effects of bolt-mesh-anchor coupling support in deep tunnels were studied by using a numerical method, based on deep tunnel coupling supporting techniques and non-linear deformation mechanical theory of rock mass at great depths.It is shown that the potential of a rigid bolt support can be efficiently activated through the coupling effect between a bolt-net support and the surrounding rock.It is found that the accumulated plastic energy in the surrounding rock can be sufficiently transformed by the coupling effect of a bolt-mesh-tray support.The strength of the surrounding rock mass can be mobilized to control the deforma-tion of the surrounding rock by a pre-stress and time-space effect of the anchor support.The high stress transformation effect can be realized by the mechanical coupling effect of the bolt-mesh-anchor support, whereby the force of the support and deformation of the surrounding rock tends to become uniform, leading to a sustained stability of the tunnel.

Effects of liquefaction-induced large lateral ground deformation on pile foundations

The pile-soil system interaction computational model in liquefaction-induced lateral spreading ground was established by the finite difference numerical method.Considering an elastic-plastic subgrade reaction method,numerical methods involving finite difference approach of pile in liquefaction-induced lateral spreading ground were derived and implemented into a finite difference program.Based on the monotonic loading tests on saturated sand after liquefaction,the liquefaction lateral deformation of the site where group piles are located was predicted.The effects of lateral ground deformation after liquefaction on a group of pile foundations were studied using the fmite difference program mentioned above,and the failure mechanism of group piles in liquefaction-induced lateral spreading ground was obtained.The applicability of the program was preliminarily verified.The results show that the bending moments at the interfaces between liquefied and non-liquefied soil layers are larger than those at the pile＇s top when the pile＇s top is embedded.The value of the additional static bending moment is larger than the peak dynamic bending moment during the earthquake,so in the pile foundation design,more than the superstructure＇s dynamics should be considered and the effect of lateral ground deformation on pile foundations cannot be neglected.

Three-dimensional numerical modeling of fullspace transient electromagnetic responses of water in goaf

The full-space transient electromagnetic response of water-filled goaves in coal mines were numerically modeled. Traditional numerical modeling methods cannot be used to simulate the underground full-space transient electromagnetic field. We used multiple transmitting loops instead of the traditional single transmitting loop to load the transmitting loop into Cartesian grids. We improved the method for calculating the z-component of the magnetic field based on the characteristics of full space. Then, we established the full- space 3D geoelectrical model using geological data for coalmines. In addition, the transient electromagnetic responses of water-filled goaves of variable shape at different locations were simulated by using the finite-difference time-domain （FDTD） method. Moreover, we evaluated the apparent resistivity results. The numerical modeling results suggested that the resistivity differences between the coal seam and its roof and floor greatly affect the distribution of apparent resistivity, resulting in nearly circular contours with the roadway head at the center. The actual distribution of apparent resistivity for different geoelectrical models of water in goaves was consistent with the models. However, when the goal water was located in one side, a false low-resistivity anomaly would appear on the other side owing to the full-space effect but the response was much weaker. Finally, the modeling results were subsequently confirmed by drilling, suggesting that the proposed method was effective.

Inverse log polar transformation algorithm based on sub-pixel interpolation

Log polar transformation is an important algorithm of space-variant vision theory.It well depicts the retino-cortical mapping.Due to the logarithmic and the arctangent operation in the transformation,the log polar coordinate of an image is mostly a decimal fraction and the range is quite narrow.Aiming at solving these problems,this paper puts forward an inverse log polar transformation based on sub-pixel interpolation.The acquired log polar image of the new algorithm has no mosaic phenomenon,meanwhile it is a better simulation of retina-cortical mapping.

Numerical method and model for calculating thermal storage time for an annular tube with phase change material

For calculating the thermal storage time for an annular tube with phase change material （PCM）, a novel method is proposed. The method is suitable for either low-temperature PCM or high-temperature PCM whose initial temperature is near the melting point. The deviation fit is smaller than 8% when the time is below 2x104 s. Comparison between the predictions and the reported experimental data of thermal storage time at same conditions is investigated and good agreements have been got. Based on this method, the performance of the thermal storage unit and the role of natural convection are also investigated. Results show a linear relation between the maximum amount of stored heat and thermal storage time, and their ratio increases with the height of the thermal storage unit. As the thickness of the cavity increases, natural convection plays an increasingly important role in promoting the melting behavior of paraffin. When the thickness of the cavity is small, natural convection restrains the melting behavior of paraffin.

Spatiotemporal interpolation of precipitation across Xinjiang, China using space-time CoKriging

In various environmental studies, geoscience variables not only have the characteristics of time and space, but also are influenced by other variables. Multivariate spatiotemporal variables can improve the accuracy of spatiotemporal estimation. Taking the monthly mean ground observation data of the period 1960–2013 precipitation in the Xinjiang Uygur Autonomous Region, China, the spatiotemporal distribution from January to December in 2013 was respectively estimated by space-time Kriging and space-time CoKriging. Modeling spatiotemporal direct variograms and a cross variogram was a key step in space-time CoKriging. Taking the monthly mean air relative humidity of the same site at the same time as the covariates, the spatiotemporal direct variograms and the spatiotemporal cross variogram of the monthly mean precipitation for the period 1960–2013 were modeled. The experimental results show that the space-time CoKriging reduces the mean square error by 31.46% compared with the space-time ordinary Kriging. The correlation coefficient between the estimated values and the observed values of the space-time CoKriging is 5.07% higher than the one of the space-time ordinary Kriging. Therefore, a space-time CoKriging interpolation with air humidity as a covariate improves the interpolation accuracy.

Folded Solitary Wave Excitations for(2+1)-Dimensional Nizhnik-Novikov-Veselov System

With the help of an improved mapping approach and a linear-variable-separation approach, a new family of exact solutions with arbitrary functions of the （2＋1）-dimensional Nizhnik-Novikov-Veselov system （NNV） is derived. Based on the derived solutions and using some multi-valued functions, we find a few new folded solitary wave excitations for the （2＋1）-dimensional NNV system.

A blind watermarking algorithm based on DWT and SVD

This paper presents a new digital image blind watermarking algorithm based on combination of discrete wavelet transform （DWT） and singular value decomposition （SVD）. First of all, we make wavelet decomposition for the original image and divide the acquired low frequency sub-band into blocks. Then we make singular value decomposition for each block and embed the watermark information in the largest singular value by quantitative method. The watermark can be extracted without the original image. The experimental results show that the algorithm has a good imperceptibility and robustness.

Translation-invariant wavelet denoising of full-tensor gravity-gradiometer data

Denoising of full-tensor gravity-gradiometer data involves detailed information from field sources, especially the data mixed with high-frequency random noise. We present a denoising method based on the translation-invariant wavelet with mixed thresholding and adaptive threshold to remove the random noise and retain the data details. The novel mixed thresholding approach is devised to filter the random noise based on the energy distribution of the wavelet coefficients corresponding to the signal and random noise. The translation- invariant wavelet suppresses pseudo-Gibbs phenomena, and the mixed thresholding better separates the wavelet coefficients than traditional thresholding. Adaptive Bayesian threshold is used to process the wavelet coefficients according to the specific characteristics of the wavelet coefficients at each decomposition scale. A two-dimensional discrete wavelet transform is used to denoise gridded data for better computational efficiency. The results of denoising model and real data suggest that compared with Gaussian regional filter, the proposed method suppresses the white Gaussian noise and preserves the high-frequency information in gravity-gradiometer data. Satisfactory denoising is achieved with the translation-invariant wavelet.

A stability study of goaf based on mechanical properties degradation of rock caused by rheological and disturbing loads

Based on the classical static theory and static numerical simulation,the static method could not accurately reflect the stability of goaf where the rocks on the pillar and roof are influenced by Theological and blasting disturbance for a long time.According to the test from the site,an experimental study was made in Theological and dynamic disturbance.After that,on the basis of variable rock mechanics parameters from the experimental data,numerical simulation was used to analyze the vertical stress distribution of goaf,vertical displacement and plastic area of roof in the "deterioration" caused by Theological and blasting,which shows that the mechanics properties of the rock were greatly influenced by Theological,and dynamic disturbance.The results of the experimental study and numerical simulation show that the mechanics properties of rock are greatly influenced by Theological and dynamic disturbance.As a result,the stability of goaf is greatly reduced.Finally,by comparing golf monitoring results with the analysis of theoretical calculation,it was found that the results were approximately the same,which testifies the reliability of the method.This method provides a new way of studying the stability of goaf as well as laying a basic foundation for future safety management.