消暑荷花别样鲜

菏花又名莲花，别号芙蓉、芙蕖，为睡莲科多年生水生草本莲的花蕾，花期在7-8月的夏季，花大单一，顶生，直径12-13厘米，粉红色或白色，芳香，花瓣多数，呈长圆形，椭圆形至倒卵形，菏花不仅风姿卓约，清香宜人，而且可入馔入药，菏花性味温、苦甘，有活血止血、祛湿除风之轼效，可治疗跌打哎血，天泡湿疮等。据现代研究证明，菏花含槲皮素、木犀草素、异槲皮甙、木犀草。素葡萄糖甙、山柰酚、山柰酚-3-半乳糖葡萄糖甙、山柰酚-3葡萄糖甙等多种黄酮类，菏花入馔清芬鲜香，且具美容食疗之功效，盛夏尤宜，现介绍几款以菏花为料烹制的菜式为读者消夏。

Design considerations for the improved current-doubler-rectifier ZVS PWM full-bridge converter

The improved current-doubler-rectifier zero-voltage-switching PWM full-bridge converter (CDR ZVS PWM FB converter) achieves ZVS for the switches in a wide load range with the use of the energy stored in the output filter inductances, and the rectifier diodes commute naturally, therefore no oscillation and voltage spike occurs. The transformer needs no special manufacture method to limit the leakage inductance. The ZVS achievement and the design considerations for the output filter inductances and the blocking capacitor are discussed for the improved CDR ZVS PWM FB converter. A 540 W prototype converter is built in the lab to verify the operational principle and design considerations for the improved converter, the experimental results are also included.

Microsatellite instability in gastric cancer and pre-cancerous lesions

AIM: To investigate the microsatellite instability (MSI) in cancer and pre-cancerous lesions of the stomach and its mechanisms underlying the development of gastric cancer.METHODS: Thirty-six gastric cancer samples were obtained from patients undergoing surgery. Forty-one gastric mucosa samples with dysplasia and 51 with intestinal metaplasia (IM) were obtained from patients with chronic gastritis undergoing gastro-endoscopy. Genomic DNA was extracted from the samples. Silver staining single strand conformation polymorphis-polymerize chain reaction (SSCP-PCR) was used to screen MSI markers at 5 loci (Bat-25, Bat-26, D5S346, D17S250, and D2S123)in fresh tissues and formalin-fixed, paraffin-embedded samples and their corresponding normal gastric mucosa.RESULTS: The abnormal shifting of the single-strand DNA (MSI) was identified in 21 out of 36 (58.3%) gastric cancers.Seven cases showed high-level MSI (two or more loci altered) and 14 showed low-level MSI (one locus altered).Gastric cancer with MSI had a tendency to be located in the distal stomach. MSI was also detected in 11 out of 41(26.8%) dysplasia samples and in 9 of 51 (17.6%) IM samples respectively. Three cases of dysplasia and one case of IM showed high-level MSI. Eight cases of dysplasia and 8 cases of IM displayed low-level MSI. MIS in IM was found only in moderate or severe-grade IM. No association was detected between MSI and dysplasia grade.CONCLUSION: Accumulation of MSI in dysplasia and intestinal metaplasia of gastric mucosa may be an early molecular event during gastric carcinogenesis and may contribute to the acquisition of transformed cell phenotype and the development of gastric cancer.

Concept on the pathogenesis and treatment of primary biliarycirrhosis

Primary biliary cirrhosis (PBC) is an organ-specific autoimmune disease that predominantly affects women and is characterized by chronic, progressive destruction of small intrahepatic bile ducts with portal inflammation and ultimately fibrosis, leading to liver failure in the absence of treatment. Little is known about the etiology of PBC. PBC is characterized by anti-mitochondrial antibodies and destruction of intrahepatic bile ducts. The serologic hallmark of PBC is the presence of auto-antibodies to mitochondria, especially to the E2 component of the pyruvate dehydrogenase complex (PDC). Current theories on the pathogenesis of PBC favor the hypothesis that the disease develops as a result of an inappropriate immune response following stimulation by an environmental or infectious agent. Some reports suggest that xenobiotics and viral infections may induce PBC. The pathogenetic mechanism is believed to be caused by a defect in immunologic tolerance, resulting in the activation and expansion of self-antigen specific T and B lymphocyte clones and the production of circulating autoantibodies in addition to a myriad of cytokines and other inflammatory mediators. This leads to ductulopenia and persistent cholestasis, by developing end-stage hepatic-cell failure. In this review are given our own and literary data about mechanisms of development of intrahepatic cholestasis and possible ways of its correction.

Identifying Scale-location Specific Control on Vegetation Distribution in Mountain-hill Region

vegetation continuous The scale-location specific control on distribution was investigated through wavelet transforms approaches in subtropical mountain-hill region, Fujian, China. The Normalized Difference Vegetation Index （NDVI） was calculated as an indicator of vegetation greenness using Chinese Environmental Disaster Reduction Satellite images along latitudinal and longitudinal transects. Four scales of variations were identified from the local wavelet spectrum of NDVI, with much stronger wavelet variances observed at larger scales. The characteristic scale of vegetation distribution within mountainous and hilly regions in Southeast China was around 20 km. Significantly strong wavelet coherency was generally examined in regions with very diverse topography, typically characterized as small mountains and hills fractured by rivers and residents. The continuous wavelet based approaches provided valuable insight on the hierarchical structure and its corresponding characteristic scales of ecosystems, which might be applied in defining proper levels in multilevel models and optimal bandwidths in Geographically Weighted Regression.

Variable Relation Parametric Model on Graphics Modelon for Collaboration Design

A new approach to variable relation parametric model for collaboration design based on the graphic modelon has been put forward. The paper gives a parametric description model of graphic modelon, and relating method for different graphic modelon based on variable constraint. At the same time, with the aim of engineering application in the collaboration design, the autonmous constraint in modelon and relative constraint between two modelons are given. Finally, with the tool of variable and relation dbase, the solving method of variable relating and variable-driven among different graphic modelon in a part, and double-acting variable relating parametric method among different parts for collaboration are given.

Analysis and suppression method of transformer no-load closing excitation inrush current

The primary winding of the transformer will generate large inrush current due to the saturation of iron core when an unloaded transformer is switched-on. The inrush current not only causes mechanical interaction force due to which the windings are damaged, but also induces the differential protection relays to operate incorrectly. In this paper, the mathematical model of unloaded single phase transformer in switch-on is analyzed; the computation formulas of the inrush current and its interruption angle are presented. The experiment investigation of single phase transformers with different capacities shows that the inrush current measurement result is consistent with theoretical analysis. The inrush current waveform is typically a steeple top waveform with high order harmonics and damping in one direction. In the same condition, large inrush current amplitude will be induced with smaller switching angle, larger residual flux and smaller saturation flux.

Fault diagnosis and fault-tolerant control of photovoltaic micro-inverter

An observer-based fault diagnosis method and a fault tolerant control for open-switch fault and current sensor fault are proposed for interleaved flyback converters of a micro-inverter system. First, based on the topology of a grid-connected micro-inverter, a mathematical model of the flyback converters is established. Second, a state observer is applied to estimate the currents online and generate corresponding residuals. The fault is diagnosed by comparing the residuals with the thresholds. Finally, a fault-tolerant control that consists of a fault-tolerant topology for the faulty switch and a simple software redundancy control for the faulty current sensor, is proposed to achieve a fault-tolerant operation. The feasibility and effectiveness of the proposed method has been verified by simulation and experimental results.

Hazard development mechanism and deformation estimation of water solution mining area

Based on the hazard development mechanism, a water solution area is closely related to the supporting effect of pressure-bearing water, the relaxing and collapsing effect of orebody interlayer, the collapsing effect of thawless material in orebody, filling effect caused by cubical expansibility of hydrate crystallization and uplifting effect of hard rock layer over cranny belt. The movement and deformation of ground surface caused by underground water solution mining is believed to be much weaker than that caused by well lane mining, which can be predicted by the stochastic medium theory method. On the basis of analysis on the engineering practice of water solution mining, its corresponding parameters can be obtained from the in-site data of the belt water and sand filling mining in engineering analog approach.

DEM Production/Updating Based on Environmental Variables Modeling and Conflation of Data Sources

Availability of digital elevation models （DEMs） of a high quality is becoming more and more important in spatial studies. Standard methods for DEM creation use only intentionally acquired data sources. Two approaches which employ various types of data sets for DEM production are proposed： （1） Method of weighted sum of different data sources with morphological enhancement that conflates any additional data sources to principal DEM, and （2） DEM updating methods of modeling absolute and relative temporal changes, considering landslides, earthquakes, quarries, watererosion, building and highway constructions, etc. Spatial modeling of environmental variables concerning both approaches for （a） quality control of data sources, considering regions, （b） pre-processing of data sources, and （c） processing of the final DEM, have been applied. The variables are called rate of karst, morphologic roughness （modeled from slope, profile curvature and elevation）, characteristic features, rate of forestation, hydrological network, and rate of urbanization. Only the variables evidenced as significant were used in spatial modeling to generate homogeneous regions in spatial modeling a-c. The production process uses different regions to define high quality conflation of data sources to the final DEM. The methodology had been confirmed by case studies. The result is an overall high quality DEM with various well-known parameters.

Suppression to the cross-channel interference based on the short time Fourier transform

A new cross-channel interference suppression method is proposed to decrease the cross-channel interference in beat signals based on the short time Fourier transform （STY3＂） and the inverse short time Fourier transform （ISTFT） when the dual-orthogonal polarimetric frequency-modulated continu- ous wave （FMCW） radar adopts the opposite-slope linear frequency modulation signal pair in the simultaneous measurement mode. The STFT is applied only on the signals in the cross-interference intervals in the four polarimetric channels to decrease the computation complexity. A mask matrix for suppressing the interference is constructed using the constant false alarm ratio （CFAR） detection on the spectrograms by the STFY. The simulative results show that the cross-channel interference is effi- ciently suppressed by the proposed method. The comparison between the proposed method and the rejection method verifies the improved performance of the proposed method.

Variable Universe Fuzzy Control for Battery Equalization

In order to avoid the overcharge and overdischarge damages, and to improve the lifetime of the lithium-ion batteries, it is essential to keep the cell voltages in a battery pack at the same level,i.e., battery equalization. Based on the bi-directional modified Cuk converter, variable universe fuzzy controllers are proposed to adaptively maintain equalizing currents between cells of a serially connected battery pack in varying conditions. The inputs to the fuzzy controller are the voltage differences and the average voltages of adjacent cell pairs. A large voltage difference requires large equalizing current while adjacent cells both with low/high voltages can only stand small discharge/charge currents. Compared with the conventional fuzzy control method, the proposed method differs in that the universe can shrink or expand as the effects of the input changes. This is important as the input may change in a small range. Simulation results demonstrate that the proposed variable universe fuzzy control method has fast equalization speed and good adaptiveness for varying conditions.

Control Method of Three-level Neutral-point-clamped Inverter Based on Voltage Vector Diagram Partition

A new modulation approach was presented for the control of neutral-point （NP） voltage variation in the three-level NP-clamped voltage source inverter, and the average NP current model was established based on vector diagram partition. Thus, theory base was built for balancing control of NP potential. Theoretical analysis and experimental results indicate that the proposed method for NP balancing control vector synthe- sizing concept based can make the average NP current zero, and do not influence NP potential within every sample period. The effectiveness of proposed research approach was verified by simulative and experimental results.

Understanding the evolution of learning by explicitly modeling learning mechanisms

Models of the evolution of learning often assume that learning leads to the best solution to any task, and disregard the details of the learning and decision-making process along with its potential pitfalls. These models therefore do not explain in- stances in the animal behavior literature in which learning leads to maladaptive behaviors. In recent years a growing number of theoretical studies use explicit models of learning mechanisms, offering a fresh perspective on the issue by revealing the dynam- ics of information acquisition and biases arising from it. These models have pointed out possible learning rules and their adaptive value, and shown that the value of learning may crucially depend on such factors as the layout of the physical environment to be learned, the structure of the payoffs offered by different alternatives, the risk of failure, characteristics of the learner and social interactions. This review considers the merits of explicit modeling in studying the evolution of learning, describes the kinds of results that can only be obtained from this modeling approach, and outlines directions for future research .

Passive vibration control of truss-cored sandwich plate with planar Kagome truss as one face plane

Kagome based high authority shape morphing structure is a kind of truss-cored sandwich metal plate with a planar Kagome truss as one of its face plane. The planar Kagome truss can achieve arbitrary in-plane nodal displacements with minimal internal resistance when its rods are deformed. Moreover, the in-plane deflection of the planar Kagome truss may induce the lateral deflection of the whole sandwich plate. In this paper, the feasibility to enhance the damping of the truss-cored sandwich plate through the replacement of a very small portion of rods in the planar Kagome truss by cylindrical viscoelastic dampers is exploited. The Biot model is chosen to simulate the behavior of the viscoelastic material in the dampers, and the fraction of axial modal strain energy of the rods in the planar Kagome truss is adopted as the index to decide the positions of the dampers. Through complex modal analysis and time-domain simulation, it is shown that the passive vibration control approach is very effective for the vibration reduction of this kind of truss-cored sandwich plates.

Fixture Variation Diagnosis of Compliant Assembly Using Sensitivity Matrix

An automotive body is composed of compliant sheet metal parts.Fast and exactly diagnosing variation sources is very important when assembly variations happen.This paper proposes a diagnosis method of multi fixture variations based on the variation model of compliant sheet metal assembly.The assembly variation model is obtained by using the method of influence coefficients(MIC) and considering the manufacturing variations of compliant parts and multi fixture variations.The measurement point variations induced by part manufacturing variations are firstly removed from the measurement data.The variation patterns of multi fixture variations are constructed by column vectors of fixture variation sensitivity matrix.This method is proved to be feasible for exactly diagnosing the fixture variations and has higher diagnosis efficiency than designated component analysis(DCA).

Transfer efficiency optimal control of magnetic resonance coupled system of wireless power transfer based on frequency control

In order to suppress the fast decrease of the transfer efficiency of magnetic resonance coupled wireless power transfer system(MRCWPTS) with distance increase,this paper investigates the impact factors of the system transfer efficiency and is,then formulates a new efficiency optimal control method based on frequency control.Based upon this control method two optimal control schemes are designed to achieve transfer efficiency control of the system.Simulations and experiments show that the proposed efficiency optimal control method can effectively stabilize the system transfer efficiency in a certain range so as to successfully solve the subtle issue of transfer efficiency variation with distance.