Effect of processing route on grain refinement in pure copper processed by equal channel angular extrusion

An experimental study of the microstructures in pure copper billets processed by 8 passes of equal channel angular extrusion （ECAE） via an extended range of processing routes with a 90° die is carried out. Each processing route is defined according to the inter-pass billet rotation angle （χ）, which varies from 0° to 180°. According to the generation of high-angle boundaries and reduction of grain size by electron backscatter diffraction （EBSD） measurements, the grain refinement is found to be most efficient for route with χ=90°and least efficient with χ=180°, among the seven routes studied. This trend is supported by supplementary transmission electron microscopy （TEM） measurements. Comparison of the EBSD and TEM data reveals the importance of considering the non-equiaxity of grain structures in quantitative assessment of microstructural differences in ECAE-processed materials.

Hybrid particle filtering algorithm for GPS multipath mitigation

An altemative algorithm for mitigating GPS multipath was presented by integrating unscented Kalman filter （UKF） and wavelet transform with particle filter. Within consideration of particle degeneracy, UKF was taken for drawing particle. To remove the noise from raw data and data processing error, adaptive wavelet filtering with threshold was adopted while data preprocessing and drawing particle. Three algorithms, named EKF-PF, UKF-PF and WM-UKF-PF, were performed for comparison. The proposed WM-UKF-PF algorithm gives better error minimization, and significantly improves performance of multipath mitigation in terms of SNR and coefficient even though it has computation complexity. It is of significance for high-accuracy positioning and non-stationary deformation analysis.

Energy conversion of rocks in process of unloading confining pressure under different unloading paths

Based on energy theory and tests of rocks with initial confining pressures of 10, 20 and 30 MPa under different unloading paths, the processes of strain energy conversion were investigated. The absorbing strain energy for axial compression, the dissipating strain energy for plastic deformation and cracks propagation, the expending strain energy for circumferential deformation, and the storing and releasing elastic strain energy were considered. Unloading paths included the condition of fixing axial pressure and unloading axial pressure, increasing axial pressure and unloading confining pressure, as well as unloading axial pressure and confining pressure simultaneously. Results show that expending strain energy for circumferential deformation has mainly evolved from absorbing strain energy for axial compression in three unloading paths during unloading processes. Dissipating strain energy is significantly increased only near the peak point. The effect of initial confining pressure on strain energy is significantly higher than that of unloading path. The strain energy is linearly increased with increasing initial confining pressure. The unloading path and initial confining pressure also have great influence on the energy dissipation. The conversion rate of strain energy in three paths is increased with increasing initial confining pressure, and the effect of initial confining pressure on conversion rate of strain energy is related with the unloading paths.

EFFECT OF TOOL-PATH ON MILLING ACCURACY UNDER CLAMPING

To resolve the deformation problem for thin-walled aero-parts in the actual production, this paper simulates the effect of the tool-path on the machining accuracy of the thin-walled frame. The frame is shaped in the part milling under a given clamping condition by using the three-dimensional finite element method （FEM）. Result shows that the sidewall deformation has a big difference if only the tool-path changes. When the tool-path from the outside to the inside is used, the machining deformation is smaller than another three kinds of toolpaths. Simulation results are compared with experimental data, and the correctness of the simulation is verified.Reasonable processing paths can be found by FEM.

Application of crystal plasticity modeling in equal channel angular extrusion

Some applications of crystal plasticity modeling in equal channel angular extrusion（ECAE） of face-centered cubic metals were highlighted.The results show that such simulations can elucidate the dependency of grain refinement efficiency on processing route and the directionality of substructure development,which cannot be explained by theories that consider only the macroscopic deformation behavior.They can also capture satisfactorily the orientation stability and texture evolution under various processing conditions.It is demonstrated that crystal plasticity models are useful tools in exploring the crystallographic nature of grain deformation and associated behavior that are overlooked or sometimes erroneously interpreted by existing phenomenological theories.

柳州站接发列车工作状况及优化措施

为提高车站接发列车的能力，柳州车站针对接发列车工作出现的一些问题，采取正确使用新设备、合理运用股道、人员、时间等方面的措施，使车站接发列车出现的梗阻、不畅通问题得到基本解决。

Some Trials of Typical Typhoon Tracks Using the Adjoint Method

In this paper, the adjoint method is applied to the statistical-dynamic model （SD-90） for the prediction of typhoon tracks along with the regularization thinking and optimal control techniques. The adjoint model and the gradient of objective function are deduced with the continual model respectively. For 4 typical typhoons, the forces and the initial velocity can be retrieved well, and the tracks of these typhoons are accurately fitted for an appropriate regularization parameter and optimal control parameter.

Primary and recency effects based on loading path in classical plasticity

We have established an elastoplastic analysis model to explore the effect of loading path in an incompressible thin-walled tube under the combined action of axial force and torque based on Mises yield condition and isotropic linear hardening assumption.Further,four stress areas(σx,τx)are divided according to the characteristics of the final stress,and the plastic stress-strain relationship of twelve stress paths in different stress areas is derived.The"primary effect"of the stress path on plastic strain is demonstrated,namely,the plastic strain caused by the pre-loaded stress in path A(tensile stress is initially applied,followed by shear stress)is always greater than that caused by the post-loaded stress in path C(shear stress is initially applied,followed by tensile stress)irrespective of the value of final stress.The"recency effect"of the strain path on the stress is also established,which indicates that the stress caused by the post-loaded strain in path A is always greater than that caused by the pre-loaded strain in path C irrespective of the value of final strain.From the perspective of deformation,the"primary effect"of the stress path on the plastic strain and the"recency effect"of the strain path on the stress are unified.These effects are succinct and universal,and they provide useful insights on the plastic stress-strain relationship under different loading paths.Furthermore,they can serve as a useful reference for optimizing the processing technologies and construction procedures.

Fission and Fusion of Localized Coherent Structures for a Higher-Order Broer-Kaup System

Starting from a Backlund transformation and taking a special ansatz for the function f, we can obtain a much more generalexpression of solution that includes some variable separated functions for the higher-order Broer-Kaup system. From this expression, we investigate the interactions of localized coherent structures such as the multi-solitonic excitations and find the novel phenomenon that their interactions have non-elastic behavior because the fission/fusion may occur after the interaction of each localized coherent structure.

Effects of annealing treatments on forming performance of zirconium alloys

The effects of annealing treatments(ATs)on the microstructure of Zr-Sn-Nb alloy strips were studied.Based on the characteristics of strips for nuclear fuel assemblies,punching experiments were carried out and the formability of zirconium alloy strips was quantitatively evaluated.The results indicate that the proportions of small-angle grain boundaries of the zirconium alloy under conditions of annealing treatment at 580°C(ATⅠ)and annealing treatment at 620°C(ATⅡ)are 14.3%and 23.2%,respectively,while that of the as-received material is 12.4%.And the forming limit margin fields of the zirconium alloy under ATⅠcan reach 0.43%,while the values of the as-received material and the ATⅡare-0.35%and-2.8%,respectively.The annealing process affects the evolution process of the strip recrystallization texture and the grain size.Moreover,the total texture and pole density are closely related to the degree of anisotropy of the strip.Besides,the small-angle grain boundary affects the strain path and crack expansion of the necking unit during the strip punching process,while the grain size affects the hardening exponent of the material.

A self-regulating pairwise swapping algorithm to search reliability-based user equilibrium

The violation of monotonicity on reliability measures(RMs)usually makes the mathematical programming algorithms less efficient in solving the reliability-based user equilibrium(RUE)problem.The swapping algorithms provide a simple and convenient alternative to search traffic equilibrium since they are derivative-free and require weaker monotonicity.However,the existing swapping algorithms are usually based on linear swapping processes which cannot naturally avoid overswapping,and the step-size parameter update methods do not take the swapping feature into account.In this paper,we suggest a self-regulating pairwise swapping algorithm(SRPSA)to search RUE.SRPSA comprises an RM-based pairwise swapping process(RMPSP),a parameter self-diminishing operator and a termination criterion.SRPSA does not need to check the feasibility of either solutions or step-size parameter.It is suggested from the numerical analyses that SRPSA is effective and can swap to the quasi-RUE very fast.Therefore,SRPSA offers a good approach to generate initial points for those superior local search algorithms.

New Exact Solution of （N＋1）-Dimensional Burgers System

In this letter, using a Baecklund transformation and the new variableseparation approach, we find a new general solution of the (N+1)-dimensional Burgers system. Theform of the universal formula obtained from many (2+1)-dimensional system is extended.

Interaction of major genes predisposing to hepatocellular carcinoma with genes encoding signal transduction pathways influences tumor phenotype and prognosis

Studies on rodents and humans demonstrate an inherited predisposition to hepatocellular carcinoma （HCC）. Analysis of the molecular alterations involved in the acquisition of a phenotype resistant or susceptible to hepatocarcinogenesis showed a deregulation of G1 and S phases in HCC of genetically susceptible F344 rats and a G1-S block in lesions of resistant Brown norway （BN） rats. Unrestrained extracellular signal-regulated kinase （ERK） activity linked to proteasomal degradation of dual-specificity phosphatase 1 （DUSP1）, a specific ERK inhibitor, by the CKS1-SKP2 ubiquitin ligase complex occurs in more aggressive HCC of F344 rats and humans. This mechanism is less active in HCC of BN rats and human HCC with better prognosis. Upregulation of iNos cross-talk with IKK/NF-KB and RAS/ERK pathways occurs in rodent liver lesions at higher levels in the most aggressive models represented by HCC of F344 rats and c-Myc-TGF-α transgenic mice. iNOS, IKK/NF-κB, and RAS/ERK upregulation is highest in human HCC with a poorer prognosis and positively correlates with tumor proliferation, genomic instability and microvascularization, and negatively with apoptosis. Thus, cell cycle regulation and the activity of signal transduction pathways seem to be modulated by HCC modifier genes, and differences in their efficiency influence the susceptibility to hepatocarcinogenesis and probably the prognosis of human HCC.

Characterization of a novel developmentally retarded mutant (drm1) associated with the autonomous flowering pathway in Arabidopsis

A developmentally retarded mutant (drm1) was identified from ethyl methanesulfonate (EMS)-mutagenized M2 seedsin Columbia (Col-0) genetic background. The drm1 flowers 109 d after sowing, with a whole life cycle of about 160 d.It also shows a pleiotropic phenotype, e.g., slow germination and lower germination rate, lower growth rate, curlingleaves and abnormal floral organs. The drm1 mutation was a single recessive nuclear mutation, which was mapped tothe bottom of chromosome 5 and located within a region of 20-30 kb around MXK3.1. There have been no mutantswith similar phenotypes reported in the literature, suggesting that DRM1 is a novel flowering promoting locus. Thefindings that the drm1 flowered lately under all photoperiod conditions and its late flowering phenotype was significantlyrestored by vernalization treatment suggest that the drm1 is a typical late flowering mutant and most likely associatedwith the autonomous flowering pathway. The conclusion was further confirmed by the revelation that the transcriptlevel of FLC was constantly upregulated in the drm1 at all the developmental phases examined, except for a very earlystage. Moreover, the transcript levels of two other important repressors, EMF and TFL1, were also upregulated in thedrm1, implying that the two repressors, along with FLC, seems to act in parallel pathways in the drm1 to regulateflowering as well as other aspects of floral development in a negatively additive way. This helps to explain why the drm1exhibits a much more severe late-flowering phenotype than most late-flowering mutants reported. It also implies that theDRM1 might act upstream of these repressors.

Multi-linear Variable Separation Approach to Solve a (2+1)-DimensionalGeneralization of Nonlinear Schroedinger System

By using a Baecklund transformation and the multi-linear variable separationapproach, we find a new general solution of a (2+1)-dimensional generalization of the nonlinearSchroedinger system. The new 'universal' formula is defined, and then, rich coherent structures canbe found by selecting corresponding functions appropriately.

Adaptive Region Boosting method with biased entropy for path planning in changing environment

Path planning in changing environments with difficult regions, such as narrow passages and obstacle boundaries, creates significant chal- lenges. As the obstacles in W-space move frequently, the crowd degree of C-space changes accordingly. Therefore, in order to dynamically improve the sampling quality, it is appreciated for a planner to rapidly approximate the crowd degree of different parts of the C-space, and boost sample densities with them based on their difficulty levels. In this paper, a novel approach called Adaptive Region Boosting （ARB） is proposed to increase the sampling density for difficult areas with different strategies. What＇s more, a new criterion, called biased entropy, is proposed to evaluate the difficult degree of a region. The new criterion takes into account both temporal and spatial information of a specific C-space region, in order to make a thorough assessment to a local area. Three groups of experiments are conducted based on a dual-manipulator system with 12 DoFs. Experimental results indicate that ARB effectively improves the success rate and outperforms all the other related methods in various dynamical scenarios.

Pathways of intraseasonal Kelvin waves in the Indonesian Throughflow regions derived from satellite altimeter observation

The gridded sea level anomaly（SLA） data-set provided by AVISO is used to track the propagation of intraseasonal Kelvin waves in the Indonesian Throughflow（ITF） region. The large root mean square of intraseasonal SLA along the Sumatra and Java coast is closely related to the propagation of intraseasonal Kelvin waves that derive from the equatorial Indian Ocean. These Kelvin waves are further found to propagate following different pathways at the Lombok Strait. Pathway A propagates eastward throughout the Sumba Strait and Savu Sea to reach the Ombai Strait. Pathway B penetrates into Lombok and propagates northward to reach the Makassar Strait. Pathway C propagates southeastward along the southwest coast of the Sumba Island. The equatorial Kelvin waves take around 15 days to travel from the equatorial Indian Ocean to Lombok Strait, and around 5 days to penetrate into the Makassar and Ombai straits. The Kelvin wave-induced SLA persists in the ITF region for an additional 5 days and then diminishes subsequently. The phase speeds of these intraseasonal Kelvin waves along Pathways A, B, and C are 1.91–2.86, 1.69, and 1.96 m s^-1,respectively—in agreement with the first two baroclinic modes of Kelvin waves.

Pyrolysis Mechanisms of Quinoline and Isoquinoline with Density Functional Theory

The pyrolysis mechanisms of quinoline and isoquinoline were investigated using the density functional theory of quantum chemistry,including eight reaction paths and a common tautomeric intermediate 1-indene imine.It is concluded that the conformational tautomerism of the intermediate decides the pyrolysis products(C6H6,HC≡C—C≡N,C6H5C≡N and HC≡CH)to be the same,and also decides the total disappearance rates of the reactants to be the same,for both original reactants quinoline and isoquinoline during the pyrolysis reaction.The results indicate that the intramolecular hydrogen migration is an important reaction step,which often appears in the paths of the pyrolysis mechanism.The activation energies of the rate determining steps are obtained.The calculated results are in good agreement with the experimental results.

A Novel Algorithm Based on 3D-MUSIC Algorithm for Localizing Near-Field Source

A novel 3-D MUSIC algorithm based on the classical 3D-MUSIC algorithm for the location of near-field source was presented. Under the far-field assumption of actual near-field, two algebraic relations of the location parameters between the actual near-field sources and the far-field ones were derived. With Fourier transformation and polynomial-root methods, the elevation and the azimuth of the far-field were obtained, the tracking paths can be developed, and the location parameters of the near-field source can be determined, then the more accurate results can be estimated using an optimization method. The computer simulation results prove that the algorithm for the location of the near-fields is more accurate, effective and suitable for real-time applications.

A path analysis of the cultivated land change in Hubei Province,China

Hubei Province is one of the critical grain production regions in China with the quantitative cultivated landand good natural condition; it plays an important role in grain security in China. However, owing to rapid economicgrowth, population pressures, anthropogenic activities, and natural disasters, the quality of the cultivated land hassignificantly decreased in recent years and environmental resources are under increasing stress. In order to research onthe mechanism of the change of the cultivated land, this paper analyzes qualitatively the influencing factors of thecultivated land change in Hubei Province from 1978 to 2004, and distinguishes the direct factors from indirect influentones by means of the approach of the path analysis. The result shows that the area of the rent land in the total non-agricultural land, the total population growth and the fixed asset investment are the main factors deciding the change ofthe cultivated land. Meanwhile, the density of the transportation network, the proportion of per capita income of ruralcitizens to that of urban citizens, non-agricultural gross domestic production’s share of the total GDP has a less directeffect but a more indirect influence on the decrease of the cultivated land in Hubei Province. The result means that whilesome factors have less direct influence on the change of the cultivated land, its indirect influence are significant, viceversa. Thus it’s necessary to adopt a comprehensive measurement to protect the cultivated land.