All of the Rho GTPase seems to form a special sub-family,because such a sub-family has so far only found in plants,and then named Rop GTPase,which directly involved in and regulated of muscle actin cytoskeletal reorga...All of the Rho GTPase seems to form a special sub-family,because such a sub-family has so far only found in plants,and then named Rop GTPase,which directly involved in and regulated of muscle actin cytoskeletal reorganization,such as a series of signal transductions.The efficient purification technology and the means of ROP GTPase in wheat are the key basis of the studies on its functions and prosperities.And it has a very important theoretical and practical significance in the signal transduction and F-act...展开更多
Cold plasma techniques were used to treat the surface of Kevlar-49 fibers. The dynamic parameters of wetting, contact-angles and surface energy of the fiber before and alter the treatment were compared to see the chan...Cold plasma techniques were used to treat the surface of Kevlar-49 fibers. The dynamic parameters of wetting, contact-angles and surface energy of the fiber before and alter the treatment were compared to see the changes in the wetting property. ESCA and electron spin resonance were utilized to examine the chemical composition and the attached free radicals of the fiber surface. The results, together with changes in the magnitude of the contact-angle and the number of free radicals with time after the plasma treatment do not show any ageing effect. Single filament test revealed that the tensile strength was not impaired but even improved somewhat after the plasma treatment. The experiment shows that the interlaminar shear strength of Kevlar fiber reinforced epoxy resin compo- site is increased for more than 60％% after the treatment.展开更多
AIM： To investigate if iron deposition and fat accumulation in the liver play a pathogenetic role in dimethylnitrosamine （DMN）-induced liver fibrosis in rat.METHODS： Thirty rats were treated with DMN at does conse...AIM： To investigate if iron deposition and fat accumulation in the liver play a pathogenetic role in dimethylnitrosamine （DMN）-induced liver fibrosis in rat.METHODS： Thirty rats were treated with DMN at does consecutive days of 10 μL/kg daily, i.p., for 3 consecutive day each week for 4 wk. Rats （n = 30） were sacrificed on the first day （model group A） and 21st d （model group B） after cessation of DMN injection. The control group （n = 10） received an equivalent amount of saline. Liver tissues were stained with hematoxylin ＆ eosin （HE） and Masson and Prussian blue assay and oberserved under electron microscopy. Serum alanine aminotransferase （ALT）and liver tissue hydroxyproline （Hyp） content were tested.RESULTS： The liver fibrosis did not automaticallyreverse, which was similar to previous reports, the perilobular deposition of iron accompanied with collagen showed marked characteristics at both the first and 21st d after cessation of DMN injection. However, fat accumulation in hepatocytes occurred only at the 21^st d after cessation of DMN injection.CONCLUSION： Iron deposition and fat accumulation may play important roles in pathological changes in DMN-induced rat liver fibrosis. The detailed mechanisms of these characteristics need further research.展开更多
Stable aqueous carbon inks,with graphene sheets(GSs)and carbon black(CB)as conductive fillers,are prepared by a simple one-pot ball-milling method.The asprepared composite ink with 10 wt%GSs shows optimized rheologica...Stable aqueous carbon inks,with graphene sheets(GSs)and carbon black(CB)as conductive fillers,are prepared by a simple one-pot ball-milling method.The asprepared composite ink with 10 wt%GSs shows optimized rheological properties(viscosity and thixotropy)for screen printing.The as-printed coatings based on the above ink are uniform and dense on a polyimide substrate,and exhibit a sandwich-type conductive three dimensional network at the microscale.The resistivity of the typical composite coating is as low as 0.23±0.01Ωcm(92±4Ωsq^-1,25μm),which is 30%as that of a pure CB coating(0.77±0.01Ωcm).It is noteworthy that the resistivity decreases to 0.18±0.01Ωcm(72±4Ωsq^-1,25μm)after a further rolling compression.The coating exhibits good mechanical flexibility,and the resistance slightly increases by 12%after 3000 bending cycles.With the CB/GSs composite coatings as a flexible conductor,fascinating luminescent bookmarks and membrane switches were fabricated,demonstrating the tremendous potential of these coatings in the commercial production of flexible electronics and devices.展开更多
基金Supported by National Natural Science Foundation(30671061)Shanxi Province Natural Science Foundation(2008011059-1)~~
文摘All of the Rho GTPase seems to form a special sub-family,because such a sub-family has so far only found in plants,and then named Rop GTPase,which directly involved in and regulated of muscle actin cytoskeletal reorganization,such as a series of signal transductions.The efficient purification technology and the means of ROP GTPase in wheat are the key basis of the studies on its functions and prosperities.And it has a very important theoretical and practical significance in the signal transduction and F-act...
文摘Cold plasma techniques were used to treat the surface of Kevlar-49 fibers. The dynamic parameters of wetting, contact-angles and surface energy of the fiber before and alter the treatment were compared to see the changes in the wetting property. ESCA and electron spin resonance were utilized to examine the chemical composition and the attached free radicals of the fiber surface. The results, together with changes in the magnitude of the contact-angle and the number of free radicals with time after the plasma treatment do not show any ageing effect. Single filament test revealed that the tensile strength was not impaired but even improved somewhat after the plasma treatment. The experiment shows that the interlaminar shear strength of Kevlar fiber reinforced epoxy resin compo- site is increased for more than 60％% after the treatment.
文摘AIM： To investigate if iron deposition and fat accumulation in the liver play a pathogenetic role in dimethylnitrosamine （DMN）-induced liver fibrosis in rat.METHODS： Thirty rats were treated with DMN at does consecutive days of 10 μL/kg daily, i.p., for 3 consecutive day each week for 4 wk. Rats （n = 30） were sacrificed on the first day （model group A） and 21st d （model group B） after cessation of DMN injection. The control group （n = 10） received an equivalent amount of saline. Liver tissues were stained with hematoxylin ＆ eosin （HE） and Masson and Prussian blue assay and oberserved under electron microscopy. Serum alanine aminotransferase （ALT）and liver tissue hydroxyproline （Hyp） content were tested.RESULTS： The liver fibrosis did not automaticallyreverse, which was similar to previous reports, the perilobular deposition of iron accompanied with collagen showed marked characteristics at both the first and 21st d after cessation of DMN injection. However, fat accumulation in hepatocytes occurred only at the 21^st d after cessation of DMN injection.CONCLUSION： Iron deposition and fat accumulation may play important roles in pathological changes in DMN-induced rat liver fibrosis. The detailed mechanisms of these characteristics need further research.
基金supported by the Scientific and Technological Key Project of Shanxi Province (MC2016-04 and MC2016-08)Natural Science Foundation of Shanxi Province (201801D221156)+2 种基金DNL Cooperation Fund of CAS (DNL180308)Science and Technology Service Network Initiative of CAS (KFJ-STS-ZDTP-068)Youth Innovation Promotion Association of CAS
文摘Stable aqueous carbon inks,with graphene sheets(GSs)and carbon black(CB)as conductive fillers,are prepared by a simple one-pot ball-milling method.The asprepared composite ink with 10 wt%GSs shows optimized rheological properties(viscosity and thixotropy)for screen printing.The as-printed coatings based on the above ink are uniform and dense on a polyimide substrate,and exhibit a sandwich-type conductive three dimensional network at the microscale.The resistivity of the typical composite coating is as low as 0.23±0.01Ωcm(92±4Ωsq^-1,25μm),which is 30%as that of a pure CB coating(0.77±0.01Ωcm).It is noteworthy that the resistivity decreases to 0.18±0.01Ωcm(72±4Ωsq^-1,25μm)after a further rolling compression.The coating exhibits good mechanical flexibility,and the resistance slightly increases by 12%after 3000 bending cycles.With the CB/GSs composite coatings as a flexible conductor,fascinating luminescent bookmarks and membrane switches were fabricated,demonstrating the tremendous potential of these coatings in the commercial production of flexible electronics and devices.
