对判定构成变劣技术侵权的思考

一、案情及处理结果 原告某科技有限责任公司(以下简称原告)依法取得了'颅内血肿粉碎穿刺针'实用新型专利权.该专利权利要求1表述为:一种颅内血肿粉碎穿刺针,其特征在于:针体为中空管状,后端与一带顶孔螺帽相配合;血肿粉碎器为针管状,前端封闭,靠近端部沿内壁切线方向有一个以上微孔,尾部有一固定片.

从“思变”到“变思”──论近代中国公共领域的嬗变

近代中国公共领域在挑战中应运而生。从意识到“变”的必要性到致力于变革技术,从主张变法到主张变体,从制度革新到思想文化领域的巨变,近代中国公共领域走过了曲折的历程。虽然近代中国公共领域有着某些先天不足,但它对于当代中国公共领域依然有着很强的借鉴意义。

Application of Prediction Techniques in Carbonate Karst Reservoir in Tarim Basin

Carbonate karst reservoir is the emphases of Tarim＇s carbonate exploration. However, it is buried at a large depth, which results in Weak seismic reflection signal and low S/N ratio. In addition, the karst reservoir contains great heterogeneity, so reservoir prediction is very difficult. Through many years of research and exploration, we have established a suite of comprehensive evaluation technology for carbonate karst reservoir using geophysical characteristics and a geological concept model, including a technique for reconstructing the paleogeomorphology of buried hills based on a sequence framework, seismic description of the karst reservoir, and strain variant analysis for fracture estimation. The evaluation technology has been successfully applied in the Tabei and Tazhong areas, and commercial production of oil and gas has been achieved. We show the application of this technology in the Lunguxi area in North Tarim in this paper.

In-situ Raman observation on crack tips of Vickers indent in PLZT ceramics

Vickers indentation was introduced into the originally in-plane and out-of-plane poled PLZT ceramics.The Raman spectra were in-situ recorded at selected crack tips before and after the indentations,as well as after the applications of external electric field.The results show that the changes in Raman intensities of optical modes could be sensitively related to 90° domain switching around the crack tips which are strongly dependent on the directions of original polarization and geometric locations.When the direction of electric field was perpendicular to the direction of original polarization,the 90° domain switching at crack tips of the Vickers indentation on the originally in-plane poled PLZT ceramics caused most significant change in the Raman intensity,which inhibited the crack growth.However,when the direction of electric field was parallel to the direction of original polarization,the growth of crack tips became predominantly without the 90° domain switching,which led to the crack growth.

Research and Design of an On-Chip High Efficiency Dual-Output Charge Pump

To meet the demands for different supply voltage levels on SOC required by digital modules like CPU core and analog modules,a novel dual-output charge pump is proposed. The charge pump can output a step-up and a step-down voltage simultaneously with a high driving capability. The multiple gain pair technique was introduced to enhance its efficiency. The proposed co-use technology for capacitors and switch arrays reduced its cost. The charge pump was designed and fabricated in a TSMC 0.35μm mixed-signal CMOS process. A group of analytical equations were derived to model its static characteristics. A state-space model was derived to describe its small-signal dynamic behavior. Analytical predictions were verified by Spectre simulation and testing. The consistency of simulated results as well as test results with analytical predictions demonstrated the high precision of the derived analytical equations and the developed models.

ESPRIT-Based Feature Extraction of Helicopter Acoustic Signal

Aim To extract harmonic frequencies of helicopter acoustic signal as features for hel icopter identification. Methods Estimation of signal parameters via rotational invariance techniques(ESPRIT) was selected to extract harmonic frequencies from really measured helicopter acoustic signal and an algorithm based on the SVD TLS was used. Results ESPRIT correctly extracted harmonic frequencies of helicopter using the data of limited length under the variousflight conditions. Conclusion ESPRIT is an effective method of extracting harmonic frequencies and using harmonic frequencies of helicopter acoustic signal to recognize helicopter is feasible.

Fluid identification based on frequency-dependent AVO attribute inversion in multi-scale fracture media

A key problem in seismic inversion is the identification of the reservoir fluids. Elastic parameters, such as seismic wave velocity and formation density, do not have sufficient sensitivity, thus, the conventional amplitude-versus-offset（AVO） method is not applicable. The frequency-dependent AVO method considers the dependency of the seismic amplitude to frequency and uses this dependency to obtain information regarding the fluids in the reservoir fractures. We propose an improved Bayesian inversion method based on the parameterization of the Chapman model. The proposed method is based on 1） inelastic attribute inversion by the FDAVO method and 2） Bayesian statistics for fluid identification. First, we invert the inelastic fracture parameters by formulating an error function, which is used to match observations and model data. Second, we identify fluid types by using a Markov random field a priori model considering data from various sources, such as prestack inversion and well logs. We consider the inelastic parameters to take advantage of the viscosity differences among the different fluids possible. Finally, we use the maximum posteriori probability for obtaining the best lithology/fluid identification results.

Site-directed Mutagenesis Based on Overlap Extension PCR

[Objective] To establish an efficient, convenient and economical method for site-directed mutagenesis. [Method] The target mutation was introduced into primers designed by DNAMAN5.0 software. Through overlap extension PCR for twice obtained the mutation gene which of the full length of the recombinant Human Tissue type plasminogen activator （Reteplase）. The mutation gene cloned it into pEASY- blunt simple cloning vector for sequencing. [Result] The sequencing results showed that three site mutations were fully consistent with the expected results （10~ site had been added a base-pair of A, C had been changed into G at 137~ site, G had been changed into A at 686~ site）.Three site mutations were introduced by using overlap extension PCR on one-step. The overall rate of obtaining the mutant sites was 100%. Site-directed mutagenesis will clone the recombinant Human Tissue type plas- minogen activator and laid the basis for the functional study. [Conclusion] Site-directed mutagenesis was successfully implemented based on the overlap extension PCR which is an efficient, convenient and economical DNA-directed mutagenesis method.

Characteristics analysis of rocket projectile based on intelligent morphing technology

Nose deflection control is a new concept of fast response control model.The partial nose of projectile deflects a certain angle relative to the axis of projectile body and then pressure difference emerges on the windward and leeward sides of warhead.Consequently,aerodynamic control force is generated.This control way has high control efficiency and very good application prospects in the ammunition system.Nose deflection actuator based on smart material and structure enables projectile body morphing to obtain additional aerodynamic force and moment,changes the aerodynamic characteristics in the projectile flight process,produces the corresponding balance angle and sideslip angle resulting in motor overload,adjusts flight moving posture to control the ballistics,finally changes shooting range and improves firing accuracy.In order to study characteristics of self-adaptive control projectile,numerical simulations are conducted by using fluid dynamics software ANSYS FLUENT for stabilized rocket projectile.The aerodynamic characteristics at different nose delectation angles,different Mach numbers and different angles of attack are obtained and compared.The results show that the nose deflection control has great influence on the head of rocket projectile,and it causes the asymmetry of the flow field structure and the increase of pressure differences of the warhead on the windward and leeward surface,which results in a larger lift.Finally,ballistics experiments are done for verification.The results can offer theoretical basis for self-adaptive rocket projectile design and optimization and also provide new ideas and methods for field smart ammunition research.

Volume change of macropores of titanium foams during sintering

The porosity of titanium foams obtained from the space holder technique was theoretically analyzed in the cases of volume shrinking, retaining and expanding during sintering. The relationship between porosity and spacer content was compared under different conditions. The kind of volume change of macropores during sintering was discussed. The results indicate that the relationship between porosity and spacer content depends on the decreased volume of macropores and the volume of micropores in cell-walls in the first case, while the porosity will be greater than the spacer content for the other two cases. It proves that the volume change of macropores during sintering decreases based on theory and practice.

New criterion for delay-dependent absolute stability of Lurie system with interval time-varying delay

The delay-dependent absolute stability for a class of Lurie systems with interval time-varying delay is studied. By employing an augmented Lyapunov functional and combining a free-weighting matrix approach and the reciprocal convex technique, an improved stability condition is derived in terms of linear matrix inequalities （LMIs）. By retaining some useful terms that are usually ignored in the derivative of the Lyapunov function, the proposed sufficient condition depends not only on the lower and upper bounds of both the delay and its derivative, but it also depends on their differences, which has wider application fields than those of present results. Moreover, a new type of equality expression is developed to handle the sector bounds of the nonlinear function, which achieves fewer LMIs in the derived condition, compared with those based on the convex representation. Therefore, the proposed method is less conservative than the existing ones. Simulation examples are given to demonstrate the validity of the approach.

Physiological Analysis of Two Arabidopsis thaliana Mutants in Response to CO2

[Objective] The 15urpose was to seek for the different phenotypes between wild type and Arabidopsis Mutants in response to CO2. [Method] The epidermis bioassays and seed germination test were carried out to analyze the physiological characteristics of two Arabidopsis mu- tants and their wild type. [Result] There existed distinct differences in stomata apertures, water loss and leaf temperature compared with wild type except for stomata density. In addition, seed germination test on the medium indicated that cdfl was insensitive to ABA, mannitol and NaCI, but cdsl performed contrary to cdil. [ Conclusion] There are some different physiological characteristics between wild type and mutants.

Enhancing mechanical properties and corrosion performance of AA6063 aluminum alloys through constrained groove pressing technique

The use of a constrained groove pressing(CGP) method to plastically deform AA6063 aluminum alloy led to the improved surface properties. It was found that hardness magnitude is dramatically improved and its uniformity is considerably decreased after the first pass, while subsequent passes result in better hardness behavior for the processed material. Also, the elongated grains formed in the first pass of the CGP are gradually converted to the equiaxed counterparts by adding pass numbers. Eventually, higher corrosion resistance of the sample by imposing the CGP process is related to the quick formation of passivation film and the change in the morphology of the second phase and precipitates which hinder their electrochemical reactions and decrease the potential localized attack sites.

A Distributed Monthly Water Balance Model for Analyzing Impacts of Land Cover Change on Flow Regimes

The Miyun Reservoir is the most important water source for Beijing Municipality, the capital of China with a population of more than 12 million. In recent decades, the inflow to the reservoir has shown a decreasing trend, which has seriously threatened water use in Beijing. In order to analyze the influents of land use and cover change (LUCC) upon inflow to Miyun Reservoir, terrain and land use information from remote sensing were utilized with a revised evapotranspiration estimation formula; a water loss model under conditions of human impacts was introduced; and a distributed monthly water balance model was established and applied to the Chaobai River Basin controlled by the Miyun Reservoir. The model simulation suggested that not only the impact of land cover change on evapotranspiration, but also the extra water loss caused by human activities, such as the water and soil conservation development projects should be considered. Although these development projects were of great benefit to human and ecological protection, they could reallocate water resources in time and space, and in a sense thereby influence the stream flow.

Statistically Downscaled Temperature Scenarios over China

Monthly mean temperatures at 562 stations in China are estimated using a statistical downscaling technique. The technique used is multiple linear regressions （MLRs） of principal components （PCs）. A stepwise screening procedure is used for selecting the skilful PCs as predictors used in the regression equation. The predictors include temperature at 850 hPa （7）, the combination of sea-level pressure and temperature at 850 hPa （P＋T） and the combination of geo-potential height and temperature at 850 hPa （H＋T）. The downscaling procedure is tested with the three predictors over three predictor domains. The optimum statistical model is obtained for each station and month by finding the predictor and predictor domain corresponding to the highest correlation. Finally, the optimum statistical downscaling models are applied to the Hadley Centre Coupled Model, version 3 （HadCM3） outputs under the Special Report on Emission Scenarios （SRES） A2 and B2 scenarios to construct local future temperature change scenarios for each station and month, The results show that （1） statistical downscaling produces less warming than the HadCM3 output itself; （2） the downscaled annual cycles of temperature differ from the HadCM3 output, but are similar to the observation; （3） the downscaled temperature scenarios show more warming in the north than in the south; （4） the downscaled temperature scenarios vary with emission scenarios, and the A2 scenario produces more warming than the B2, especially in the north of China.

Retrieval of the Change of Precipitable Water Vapor by GPS Technique

The feasibility of GPS precipitable water vapor （PWV） is discussed based on the comparison of Radiosonde and GPS PWV where the correlation coefficient is 0.94 and the RMS is 4.0 mm. PWV change in the Chinese mainland in 2004 is graphed with the gridding method of splines in tension, according to the GPS data of the crust monitor observation network in China, combined with relevant meteorology information. According to the distribution of the annual amount of rainfall in the country, it can be concluded that the total trend of the PWV is diminishing from the south-east coastland to the north-west inland. The PWV reaches its maximum during July and August, and the minimum is reached during January and February. According to the PWV, from high to low, all districts can be ranked as south-east coastland, the inland and the tableland.

Application of a combined supporting technology with U-shaped steel support and anchor-grouting to surrounding soft rock reinforcement in roadway

Soft rock surrounding deep roadway has poor stability and long-term rheological effect. More and larger deformation problems of surrounding rock occur due to adverse supporting measures for such roadways, which not only affects the engineering safety critically but also improves the maintenance costs. This paper takes the main rail roadway with severely deformation in China＇s Zaoquan coal mine as an example to study the long-term deformation tendency and damage zone by means of in-situ deformation monitoring and acoustic wave testing technique. A three-dimensional finite element model reflecting the engineering geological condition and initial design scheme is established by ABAQUS. Then, on the basis of field monitoring deformation data, the surrounding rock geotechnical and theological parameters of the roadway are obtained by back analysis. A combined supporting technology with U-shaped steel support and anchor-grouting is proposed for the surrounding soft rock. The numerical simulation of the combined supporting technology and in-situ deformation monitoring results show that the soft rock surrounding the roadway has been held effectively.

Investigation on Zener-Hollomon Parameter in the Warm-Hot Deformation Behavior of CF53

The warm-hot deformation behavior of CF53 steel was studied with hot compression tests at temperature of 1 123-1 273 K and strain rate of 0. 1-20 s^-l. The activation energy for warm-hot deformation is 274. 816 kJ/mol. The influences of Zener-Hollomon parameter, strain and grain size imposing on the flow stress were ana- lyzed in the temperature range of warm-hot forging. Based on the creep theory and mathematic theory of statistics, mathematical models of flow stress were obtained. The results provide a scientific basis for controlling microstruc- ture of forging process through Zener-Hollomon parameter.

Visual Prostheses: Technological and Socioeconomic Challenges

Visual prostheses are now entering the clinical marketplace. Such prostheses were originally targeted for patients suff ering from blindness through retinitis pigmentosa(RP). However, in late July of this year, for the first time a patient was given a retinal implant in order to treat dry agerelated macular degeneration. Retinal implants are suitable solutions for diseases that attack photoreceptors but spare most of the remaining retinal neurons. For eye diseases that result in loss of retinal output, implants that interface with more central structures in the visual system are needed. The standard site for central visual prostheses under development is the visual cortex. This perspective discusses the technical and socioeconomic challenges faced by visual prostheses.

Quantum Mechanics Version of Wavelet Transform Studied by Virtue of IWOPTechnique

Using the technique of integral within an ordered product (IWOP) of operators we show that the wavelet transform can be recasted to a matrix element of squeezing-displacing operator between the mother wavelet state vector and the state vector to be transformed in the context of quantum mechanics. In this way many quantum optical states'wavelet transform can be easily derived.