A new type strongly gain coupled (GC) DFB laser and a new type self alignment spot size converter (SA SSC) are proposed and successfully fabricated.The strongly GC DFB laser is monolithically integrated with the ...A new type strongly gain coupled (GC) DFB laser and a new type self alignment spot size converter (SA SSC) are proposed and successfully fabricated.The strongly GC DFB laser is monolithically integrated with the SA SSC with three step epitaxies.A high single mode yield and large side mode suppression ratio is obtained from the strongly GC DFB laser.A near circle far field pattern is obtained by using the SA SSC.展开更多
The analysis of fractured reservoirs is very important to hydrocarbon exploration. The quality factor Q is a parameter used to characterize the attenuation of seismic waves in subsurface media. Q not only reflects the...The analysis of fractured reservoirs is very important to hydrocarbon exploration. The quality factor Q is a parameter used to characterize the attenuation of seismic waves in subsurface media. Q not only reflects the inherent properties of the medium but also is used to make predictions regarding reservoir fractures. Compared with poststack seismic data, prestack seismic data contain detailed stratigraphic information of seismic attributes and data inversion in reservoirs. The extraction of absorption parameters from prestack data improves the accuracy of attenuation estimates. In this study, I present a new method for calculating Q based on the modified S transform （MST） using common midpoint （CMP） preprocessed gathers. First, I use the MST with adjustable time-frequency resolution to carry out a high-precision time-frequency analysis of prestack CMP gathers and derive the calculation formula for the improved S transform-based frequency spectrum ratio method. Then, I use the energy density ratio to calculate the slope of the frequency spectrum ratio instead of the conventional amplitude ratio. Thus, I establish the relation between the slope of the spectrum ratio and offset as well as eliminate the offset effect by multichannel linear fitting, obtaining accurate Q values from seismic prestack data. Finally, I use the proposed prestack Q extraction method to study the fractured reservoir in Qianjin burried hill and P-wave absorption and attenuation anisotropy with good results in the fracture characterization.展开更多
The efficiency, precision, and denoising capabilities of reconstruction algorithms are critical to seismic data processing. Based on the Fourier-domain projection onto convex sets （POCS） algorithm, we propose an inv...The efficiency, precision, and denoising capabilities of reconstruction algorithms are critical to seismic data processing. Based on the Fourier-domain projection onto convex sets （POCS） algorithm, we propose an inversely proportional threshold model that defines the optimum threshold, in which the descent rate is larger than in the exponential threshold in the large-coefficient section and slower than in the exponential threshold in the small-coefficient section. Thus, the computation efficiency of the POCS seismic reconstruction greatly improves without affecting the reconstructed precision of weak reflections. To improve the flexibility of the inversely proportional threshold, we obtain the optimal threshold by using an adjustable dependent variable in the denominator of the inversely proportional threshold model. For random noise attenuation by completing the missing traces in seismic data reconstruction, we present a weighted reinsertion strategy based on the data-driven model that can be obtained by using the percentage of the data-driven threshold in each iteration in the threshold section. We apply the proposed POCS reconstruction method to 3D synthetic and field data. The results suggest that the inversely proportional threshold model improves the computational efficiency and precision compared with the traditional threshold models; furthermore, the proposed reinserting weight strategy increases the SNR of the reconstructed data.展开更多
Seismic data contain random noise interference and are affected by irregular subsampling. Presently, most of the data reconstruction methods are carried out separately from noise suppression. Moreover, most data recon...Seismic data contain random noise interference and are affected by irregular subsampling. Presently, most of the data reconstruction methods are carried out separately from noise suppression. Moreover, most data reconstruction methods are not ideal for noisy data. In this paper, we choose the multiscale and multidirectional 2D curvelet transform to perform simultaneous data reconstruction and noise suppression of 3D seismic data. We introduce the POCS algorithm, the exponentially decreasing square root threshold, and soft threshold operator to interpolate the data at each time slice. A weighing strategy was introduced to reduce the reconstructed data noise. A 3D simultaneous data reconstruction and noise suppression method based on the curvelet transform was proposed. When compared with data reconstruction followed by denoizing and the Fourier transform, the proposed method is more robust and effective. The proposed method has important implications for data acquisition in complex areas and reconstructing missing traces.展开更多
The frequencies of sources involved m conventional blended acquisition are the same. Each source transmits the full frequency band, and in general, significant effort is required to successfully produce and operate wi...The frequencies of sources involved m conventional blended acquisition are the same. Each source transmits the full frequency band, and in general, significant effort is required to successfully produce and operate wideband sources. To solve this problem, inhomogeneous blended or decentralized blended acquisition is used, in which the dominant frequency and bandwidth of the source units in a blended array are not equal. When the inhomogeneous and conventional blending acquisitions adopt the same geometry and separation methods, the former has low signal-to-blending noise ratio. Therefore, we present a new separation method for such blended acquisition based on the synchrosqueezed wavelet transform. The proposed method offers better separation quality and decreases the computation time to approximately 1/3.展开更多
An optimized design of the monolithic switched capacitor DC-DC converter is presented.The general topologic circuit and its basic operating principles are discussed theoretically.Circuit equivalent resistance regulati...An optimized design of the monolithic switched capacitor DC-DC converter is presented.The general topologic circuit and its basic operating principles are discussed theoretically.Circuit equivalent resistance regulation method is proposed as a feasible method to design the on-chip converters.N-channel MOSFETs,instead of Schottky diodes,are used as the diodes in the converters because of their processing compatibility in monolithic fabrication.One more manufacture step,however,is expected to adjust the threshold voltage of the MOSFETs for improving output characteristics of the converters.As an example,a step-up switched-capacitor converter is fabricated in a 2μm p-well double-poly single-metal CMOS technology with breakdown voltage of 15V.Test results indicate that a single sampling cell with 0.4mm 2 of die size can deliver energy up to 0.63mW at 5V output under the condition of 3V input.Efficiency of the tested sample is 68% at 9.8MHz switching frequency...展开更多
An integrated 3.3V/1.2V SC DC-DC converter operating under 10MHz with a fixed duty radio of 0.5 is presented.To improve the output current of the converter,CMOS technology is adopted to fabricate the switching devices...An integrated 3.3V/1.2V SC DC-DC converter operating under 10MHz with a fixed duty radio of 0.5 is presented.To improve the output current of the converter,CMOS technology is adopted to fabricate the switching devices,and mutually compensatory circuitry technology is also employed to double the output current furthermore.The simulation results using Hspice simulation software,show that the output currents of a single unit circuit and two unit circuits connected in a mutually compensatory manner of the improved converter is about 12.5mA and 26mA,respectively.The power conversion efficiency of the mutually compensatory circuit can amount to 73%,while its output voltage ripple is less than 1.5%.The converter is fabricated in standard Rohm 0.35μm CMOS technology in Tokyo University of Japan.The test result indicates that the output current of 9.8mA can be obtained from a single unit circuit of the improved converter.展开更多
In low earth orbit (LEO) satellite or missile communication scenarios, signals may experience extremely large Doppler shifts and have short visual time. Thus, direct sequence spread spectrum (DSSS) systems should be a...In low earth orbit (LEO) satellite or missile communication scenarios, signals may experience extremely large Doppler shifts and have short visual time. Thus, direct sequence spread spectrum (DSSS) systems should be able to achieve acquisition in a very short time in spite of large Doppler frequencies. However, the traditional methods cannot solve it well. This work describes a new method that uses a differential decoding technique for Doppler mitigation and a batch process of FFT (fast Fourier transform) and IFFT (invert FFT) for the purpose of parallel code phase search by frequency domain correlation. After the code phase is estimated, another FFT process is carried out to search the Doppler frequency. Since both code phase and Doppler frequency domains are searched in parallel, this architecture can provide acquisition fifty times faster than conventional FFT methods. The performance in terms of the probability of detection and false alarm are also analyzed and simulated, showing that a signal-to-noise ratio (SNR) loss of 3 dB is introduced by the differential decoding. The proposed method is an efficient way to shorten the acquisition time with slightly hardware increasing.展开更多
In order to extract froth morphological feature,a bubble image adaptive segmentation method was proposed.Considering the image's low contrast and weak froth edges,froth image was coarsely segmented by using fuzzy ...In order to extract froth morphological feature,a bubble image adaptive segmentation method was proposed.Considering the image's low contrast and weak froth edges,froth image was coarsely segmented by using fuzzy c means(FCM) algorithm. Through the attributes of size and shape pattern spectrum,the optimal morphological structuring element was determined.According to the optimal parameters,some image noises were removed with an improved area opening and closing by reconstruction operation,which consist of image regional markers,and the bubbles were finely separated from each other by watershed transform.The experimental results show that the structural element can be determined adaptively by shape and size pattern spectrum,and the froth image is segmented accurately.Compared with other froth image segmentation method,the proposed method achieves much high accuracy,based on which,the bubble size and shape features are extracted effectively.展开更多
Calcium carbonate （CaCO3） crystals in their preferred orientation were obtained in BG11 culture media inoculated with Synechocystis sp. PCC6803 （inoculated BG11）. In this study, the features of calcium carbonate d...Calcium carbonate （CaCO3） crystals in their preferred orientation were obtained in BG11 culture media inoculated with Synechocystis sp. PCC6803 （inoculated BG11）. In this study, the features of calcium carbonate deposition were investigated. Inoculated BGll in different calcium ion concentrations was used for the experimental group, while the BGll culture medium was used for the control group. The surface morphologies of the calcium carbonate deposits in the experimental and control groups were determined by scanning and transmission electron microscopy. The deposits were analyzed by electronic probe micro-analysis, Fourier transform infrared spectrum, X-ray diffraction, thermal gravimetric analysis and differential scanning calorimetry. The results show that the surfaces of the crystals in the experimental group were hexahedral in a scaly pattern. The particle sizes were micrometer-sized and larger than those in the control group. The deposits of the control group contained calcium （Ca）, carbon （C）, oxygen （O）, phosphorus （P）, iron （Fe）, copper （Cu）, zinc （Zn）, and other elements. The deposits in the experimental group contained Ca, C, and O only. The deposits of both groups contained calcite. The thermal decomposition temperature of the deposits in the control group was lower than those in the experimental group. It showed that the CaCO3 deposits of the experimental group had higher thermal stability than those of the control group. This may be due to the secondary metabolites produced by the algae cells, which affect the carbonate crystal structure and result in a close-packed structure. The algae cells that remained after thermal weight loss were heavier in higher calcium concentrations in BGll culture media. There may be more calcium- containing crystals inside and outside of these cells. These results shall be beneficial for understanding the formation mechanism of carbonate minerals.展开更多
For a physics system which exhibits memory,if memory is preserved only at points of random self-similar fractals,we define random memory functions and give the connection between the expectation of flux and the fracti...For a physics system which exhibits memory,if memory is preserved only at points of random self-similar fractals,we define random memory functions and give the connection between the expectation of flux and the fractional integral.In particular,when memory sets degenerate to Cantor type fractals or non-random self-similar fractals our results coincide with that of Nigmatullin and Ren et al.展开更多
文摘A new type strongly gain coupled (GC) DFB laser and a new type self alignment spot size converter (SA SSC) are proposed and successfully fabricated.The strongly GC DFB laser is monolithically integrated with the SA SSC with three step epitaxies.A high single mode yield and large side mode suppression ratio is obtained from the strongly GC DFB laser.A near circle far field pattern is obtained by using the SA SSC.
基金supported in part by National Science&Technology Major Project(Grant No.2011ZX05019-008)the National Basic Research Program of China(973 Program)(Granted No.2013CB228600)Science Foundation of China University of Petroleum,Beijing(Granted No.KYJJ2012-05-10)
文摘The analysis of fractured reservoirs is very important to hydrocarbon exploration. The quality factor Q is a parameter used to characterize the attenuation of seismic waves in subsurface media. Q not only reflects the inherent properties of the medium but also is used to make predictions regarding reservoir fractures. Compared with poststack seismic data, prestack seismic data contain detailed stratigraphic information of seismic attributes and data inversion in reservoirs. The extraction of absorption parameters from prestack data improves the accuracy of attenuation estimates. In this study, I present a new method for calculating Q based on the modified S transform （MST） using common midpoint （CMP） preprocessed gathers. First, I use the MST with adjustable time-frequency resolution to carry out a high-precision time-frequency analysis of prestack CMP gathers and derive the calculation formula for the improved S transform-based frequency spectrum ratio method. Then, I use the energy density ratio to calculate the slope of the frequency spectrum ratio instead of the conventional amplitude ratio. Thus, I establish the relation between the slope of the spectrum ratio and offset as well as eliminate the offset effect by multichannel linear fitting, obtaining accurate Q values from seismic prestack data. Finally, I use the proposed prestack Q extraction method to study the fractured reservoir in Qianjin burried hill and P-wave absorption and attenuation anisotropy with good results in the fracture characterization.
基金supported by the National Natural Science Foundation of China(Nos.U1262207 and 41204101)the National Science and Technology Major Project of China(No.2011ZX05019-006)
文摘The efficiency, precision, and denoising capabilities of reconstruction algorithms are critical to seismic data processing. Based on the Fourier-domain projection onto convex sets （POCS） algorithm, we propose an inversely proportional threshold model that defines the optimum threshold, in which the descent rate is larger than in the exponential threshold in the large-coefficient section and slower than in the exponential threshold in the small-coefficient section. Thus, the computation efficiency of the POCS seismic reconstruction greatly improves without affecting the reconstructed precision of weak reflections. To improve the flexibility of the inversely proportional threshold, we obtain the optimal threshold by using an adjustable dependent variable in the denominator of the inversely proportional threshold model. For random noise attenuation by completing the missing traces in seismic data reconstruction, we present a weighted reinsertion strategy based on the data-driven model that can be obtained by using the percentage of the data-driven threshold in each iteration in the threshold section. We apply the proposed POCS reconstruction method to 3D synthetic and field data. The results suggest that the inversely proportional threshold model improves the computational efficiency and precision compared with the traditional threshold models; furthermore, the proposed reinserting weight strategy increases the SNR of the reconstructed data.
基金sponsored by the National Natural Science Foundation of China(Nos.41304097 and 41664006)the Natural Science Foundation of Jiangxi Province(No.20151BAB203044)+1 种基金the China Scholarship Council(No.201508360061)Distinguished Young Talent Foundation of Jiangxi Province(2017)
文摘Seismic data contain random noise interference and are affected by irregular subsampling. Presently, most of the data reconstruction methods are carried out separately from noise suppression. Moreover, most data reconstruction methods are not ideal for noisy data. In this paper, we choose the multiscale and multidirectional 2D curvelet transform to perform simultaneous data reconstruction and noise suppression of 3D seismic data. We introduce the POCS algorithm, the exponentially decreasing square root threshold, and soft threshold operator to interpolate the data at each time slice. A weighing strategy was introduced to reduce the reconstructed data noise. A 3D simultaneous data reconstruction and noise suppression method based on the curvelet transform was proposed. When compared with data reconstruction followed by denoizing and the Fourier transform, the proposed method is more robust and effective. The proposed method has important implications for data acquisition in complex areas and reconstructing missing traces.
基金financially supported by the Major Program National 863 Program of China(No.2014AA06A605)National Nature Science Foundation of China(No.41374115)
文摘The frequencies of sources involved m conventional blended acquisition are the same. Each source transmits the full frequency band, and in general, significant effort is required to successfully produce and operate wideband sources. To solve this problem, inhomogeneous blended or decentralized blended acquisition is used, in which the dominant frequency and bandwidth of the source units in a blended array are not equal. When the inhomogeneous and conventional blending acquisitions adopt the same geometry and separation methods, the former has low signal-to-blending noise ratio. Therefore, we present a new separation method for such blended acquisition based on the synchrosqueezed wavelet transform. The proposed method offers better separation quality and decreases the computation time to approximately 1/3.
文摘An optimized design of the monolithic switched capacitor DC-DC converter is presented.The general topologic circuit and its basic operating principles are discussed theoretically.Circuit equivalent resistance regulation method is proposed as a feasible method to design the on-chip converters.N-channel MOSFETs,instead of Schottky diodes,are used as the diodes in the converters because of their processing compatibility in monolithic fabrication.One more manufacture step,however,is expected to adjust the threshold voltage of the MOSFETs for improving output characteristics of the converters.As an example,a step-up switched-capacitor converter is fabricated in a 2μm p-well double-poly single-metal CMOS technology with breakdown voltage of 15V.Test results indicate that a single sampling cell with 0.4mm 2 of die size can deliver energy up to 0.63mW at 5V output under the condition of 3V input.Efficiency of the tested sample is 68% at 9.8MHz switching frequency...
文摘An integrated 3.3V/1.2V SC DC-DC converter operating under 10MHz with a fixed duty radio of 0.5 is presented.To improve the output current of the converter,CMOS technology is adopted to fabricate the switching devices,and mutually compensatory circuitry technology is also employed to double the output current furthermore.The simulation results using Hspice simulation software,show that the output currents of a single unit circuit and two unit circuits connected in a mutually compensatory manner of the improved converter is about 12.5mA and 26mA,respectively.The power conversion efficiency of the mutually compensatory circuit can amount to 73%,while its output voltage ripple is less than 1.5%.The converter is fabricated in standard Rohm 0.35μm CMOS technology in Tokyo University of Japan.The test result indicates that the output current of 9.8mA can be obtained from a single unit circuit of the improved converter.
基金Project(60904090) supported by the National Natural Science Foundation of China
文摘In low earth orbit (LEO) satellite or missile communication scenarios, signals may experience extremely large Doppler shifts and have short visual time. Thus, direct sequence spread spectrum (DSSS) systems should be able to achieve acquisition in a very short time in spite of large Doppler frequencies. However, the traditional methods cannot solve it well. This work describes a new method that uses a differential decoding technique for Doppler mitigation and a batch process of FFT (fast Fourier transform) and IFFT (invert FFT) for the purpose of parallel code phase search by frequency domain correlation. After the code phase is estimated, another FFT process is carried out to search the Doppler frequency. Since both code phase and Doppler frequency domains are searched in parallel, this architecture can provide acquisition fifty times faster than conventional FFT methods. The performance in terms of the probability of detection and false alarm are also analyzed and simulated, showing that a signal-to-noise ratio (SNR) loss of 3 dB is introduced by the differential decoding. The proposed method is an efficient way to shorten the acquisition time with slightly hardware increasing.
基金Projects(60634020,60874069) supported by the National Natural Science Foundation of ChinaProject(2009AA04Z137) supported by the National High-Tech Research and Development Program of China
文摘In order to extract froth morphological feature,a bubble image adaptive segmentation method was proposed.Considering the image's low contrast and weak froth edges,froth image was coarsely segmented by using fuzzy c means(FCM) algorithm. Through the attributes of size and shape pattern spectrum,the optimal morphological structuring element was determined.According to the optimal parameters,some image noises were removed with an improved area opening and closing by reconstruction operation,which consist of image regional markers,and the bubbles were finely separated from each other by watershed transform.The experimental results show that the structural element can be determined adaptively by shape and size pattern spectrum,and the froth image is segmented accurately.Compared with other froth image segmentation method,the proposed method achieves much high accuracy,based on which,the bubble size and shape features are extracted effectively.
基金Supported by the National Natural Science Foundation of China(Nos.40972043,41040018,41210104058,21176145,41372108,41302079)the Higher Educational Science and Technology Program of Shandong Province(No.J10LC15)+4 种基金the China Postdoctoral Science Foundation(No.2013M540560)the Program for Scientific Research Innovation Team in Colleges and Universities of Shandong Province,and SDUST Research Fund(No.2010KYTD103)the Open Project of Key Lab of Marine Bioactive Substance and Modern Analytical Technique,State Oceanic Administration,China(No.MBSMAT-2012-03)the Scientific and Technological Program of Qingdao(No.13-1-4-232-jch)the Domestic Visiting Scholar Program for Young Core Teachers in Shandong Universities,Shandong Province,China
文摘Calcium carbonate （CaCO3） crystals in their preferred orientation were obtained in BG11 culture media inoculated with Synechocystis sp. PCC6803 （inoculated BG11）. In this study, the features of calcium carbonate deposition were investigated. Inoculated BGll in different calcium ion concentrations was used for the experimental group, while the BGll culture medium was used for the control group. The surface morphologies of the calcium carbonate deposits in the experimental and control groups were determined by scanning and transmission electron microscopy. The deposits were analyzed by electronic probe micro-analysis, Fourier transform infrared spectrum, X-ray diffraction, thermal gravimetric analysis and differential scanning calorimetry. The results show that the surfaces of the crystals in the experimental group were hexahedral in a scaly pattern. The particle sizes were micrometer-sized and larger than those in the control group. The deposits of the control group contained calcium （Ca）, carbon （C）, oxygen （O）, phosphorus （P）, iron （Fe）, copper （Cu）, zinc （Zn）, and other elements. The deposits in the experimental group contained Ca, C, and O only. The deposits of both groups contained calcite. The thermal decomposition temperature of the deposits in the control group was lower than those in the experimental group. It showed that the CaCO3 deposits of the experimental group had higher thermal stability than those of the control group. This may be due to the secondary metabolites produced by the algae cells, which affect the carbonate crystal structure and result in a close-packed structure. The algae cells that remained after thermal weight loss were heavier in higher calcium concentrations in BGll culture media. There may be more calcium- containing crystals inside and outside of these cells. These results shall be beneficial for understanding the formation mechanism of carbonate minerals.
文摘For a physics system which exhibits memory,if memory is preserved only at points of random self-similar fractals,we define random memory functions and give the connection between the expectation of flux and the fractional integral.In particular,when memory sets degenerate to Cantor type fractals or non-random self-similar fractals our results coincide with that of Nigmatullin and Ren et al.
