By using the further extended tanh method [Phys. Lett. A 307 （2003） 269; Chaos, Solitons ＆ Fractals 17 （2003） 669] to the Broer-Kaup system with variable coefficients, abundant new soliton-like solutions and mult...By using the further extended tanh method [Phys. Lett. A 307 （2003） 269; Chaos, Solitons ＆ Fractals 17 （2003） 669] to the Broer-Kaup system with variable coefficients, abundant new soliton-like solutions and multl-solitonlike solutions are derived. Based on the derived multi-soliton-like solutions which contain arbitrary functions, some interesting multi-soliton structures are revealed.展开更多
A novel method of deriving the electromagnetic dyadic Green＇s functions in an unbounded, lossless, reciprocal and homogeneous chiral media described by the constitutive relations D = εE ＋ jγB and H = jγE ＋ μ^-1...A novel method of deriving the electromagnetic dyadic Green＇s functions in an unbounded, lossless, reciprocal and homogeneous chiral media described by the constitutive relations D = εE ＋ jγB and H = jγE ＋ μ^-1B - （ωε）^-1γJ is given. The divergenceless and irrotational splitting of dyadic Dirac 8 function and Fourier transformation are used to directly obtain the divergenceless and irrotational component of spectral-domain dyadic Green＇s functions in chiral media. This method avoids using the dyadic Green＇s function eigenfunction expansion technique. The method given here can be generalized to a source-free region and an achiral case.展开更多
Smart distribution grid needs data communication systems as a support to complete their important functions. The smart distribution grid of the data and information are increasingly adopting internet protocol and Ethe...Smart distribution grid needs data communication systems as a support to complete their important functions. The smart distribution grid of the data and information are increasingly adopting internet protocol and Ethernet technology. The IP addresses are more and more important for the smart distribution grid equipment. The current IPv4 protocol occupies a dominant position; therefore, the challenges of the evolution to IPv6 and network security are faced by data communication systems of the smart distribution grid. The importance of data communications network and its main bearer of business were described. The data communications network from IPv4 to IPv6 evolution of the five processes and four stages of the transition were analyzed. The smart distribution grid data communications network security and types of their offensive and defensive were discussed. And the data communications network security architecture was established. It covers three dimensions, the security level, the communications network security engineering and the communications network security management. The security architecture safeguards the evolution to IPv6 for the smart distribution grid data communication systems.展开更多
A discrete fuzzy sliding mode variable structure controller was studied and designed for a class of electro-hydraulic servo system by means of the combination of sliding mode control theory and fuzzy control theory. D...A discrete fuzzy sliding mode variable structure controller was studied and designed for a class of electro-hydraulic servo system by means of the combination of sliding mode control theory and fuzzy control theory. Designed based on the exponential reaching law, paratmter e of conventional sliding mode controller is the key factor of system chattering, and is ~onal to it as well. In view of this, fuzzy control theory was introduced into the design to ensure the real- time adjusting of parameter e. Sinmlation results show that the sys tem chattering is eliminated perfectly, and the dynamic performance of the control system is improved effectively.展开更多
Identifying when, where, and how India and Asia collided is a prerequisite to better understand the evolution of the Himalayan-Tibetan Plateau. Whereas with essentially the same published paleomagnetic data, a large r...Identifying when, where, and how India and Asia collided is a prerequisite to better understand the evolution of the Himalayan-Tibetan Plateau. Whereas with essentially the same published paleomagnetic data, a large range of different India-Asia collision models have been proposed in the literature. Based upon the premise of a northwards-moving Indian plate during the Cretaceous times, we analyze the significant variations in relative paleolatitude produced by a nearly 90° counterclockwise(CCW)rotation of the plate itself during the Cretaceous. Interestingly, recent studies proposed a dual-collision process with a Greater India basin or post-Neo-Tethyan ocean for the India-Asia collision, mainly in the light of divergent Cretaceous paleolatitude differences of the Tethyan Himalaya between the observed values and expected ones computed from the apparent polar wander path of the Indian plate. However, we find that these varied paleolatitude differences are mainly resulted from a nearly 90° CCW rotation of a rigid/quasi-rigid Greater Indian plate during the Cretaceous. On the other hand, when the Indian craton and Tethyan Himalaya moved as two individual blocks rather than a united rigid/quasi-rigid Greater Indian plate before the India-Asia collision, current available Cretaceous paleomagnetic data permit only multiple paleogeographic solutions for the tectonic relationship between the Indian plate and the Tethyan Himalayan terrane. We therefore argue that the tectonic relationship between the Indian plate and the Tethyan Himalayan terrane cannot be uniquely constrained by current paleomagnetic data in the absence of sufficient geological evidence, and the so-called Greater India basin model is just one of the ideal scenarios.展开更多
The three-dimensional discontinuous deformation analysis(3D-DDA) is a promising numerical method for both static and dynamic analyses of rock systems. Lacking mature software, its popularity is far behind its ability....The three-dimensional discontinuous deformation analysis(3D-DDA) is a promising numerical method for both static and dynamic analyses of rock systems. Lacking mature software, its popularity is far behind its ability. To address this problem, this paper presents a new software architecture from a software engineering viewpoint. Based on 3D-DDA characteristics, the implementation of the proposed architecture has the following merits. Firstly, the software architecture separates data, computing, visualization, and signal control into individual modules. Secondly, data storage and parallel access are fully considered for different conditions. Thirdly, an open computing framework is provided which supports most numerical computing methods; common tools for equation solving and parallel computing are provided for further development. Fourthly, efficient visualization functions are provided by integrating a variety of visualization algorithms. A user-friendly graphical user interface is designed to improve the user experience. Finally, through a set of examples, the software is verified against both analytical solutions and the original code by Dr. Shi Gen Hua.展开更多
If L is a link with two components and S1,S2…, Sn a switching sequence such that SnSn-1…S1L is unlinked, it is proved that lk（L） =∑i=1^nεi（L） and any link L can be transformed a n-twisting L~ by switching s...If L is a link with two components and S1,S2…, Sn a switching sequence such that SnSn-1…S1L is unlinked, it is proved that lk（L） =∑i=1^nεi（L） and any link L can be transformed a n-twisting L~ by switching some crossings with the linking number：lk（L）=∑i=1^mεiC（EiL）＋n展开更多
A mechanical metamaterial that has a tailorable coefficient of thermal expansion(CTE)is promising for guaranteeing the reliability of electrical and optical instruments under thermal fluctuations.Despite growing resea...A mechanical metamaterial that has a tailorable coefficient of thermal expansion(CTE)is promising for guaranteeing the reliability of electrical and optical instruments under thermal fluctuations.Despite growing research on the design and manufacturing of metamaterials with extraordinary CTEs,it remains challenging to achieve a nearly isotropic tailorable CTE while ensuring a sufficient load bearing capacity for applications,such as mechanical supporting frames.In this research,we propose a type of bi-metallic lattice whose CTE is artificially programmed from positive(75 ppm/K)to negative(−45 ppm/K),and whose equivalent modulus can be as high as 80 MPa.The bi-metallic lattice with a tailorable CTE in two orthogonal directions can be readily assembled without special modifications to construct large-scale planar structures with desired isotropic CTEs.A theoretical model that considers the actual configuration of the bi-metallic joint is developed;the model precisely captures the thermal deformations of lattice structures with varied geometries and material compositions.Guided by our theoretical design method,planar metallic structures that were manufactured using Al,Ti,and Invar alloy were experimentally characterized;the structures exhibited outstanding performance when compared with typical engineering materials.展开更多
基金中国博士后科学基金，National Key Basic Research Project of China
文摘By using the further extended tanh method [Phys. Lett. A 307 （2003） 269; Chaos, Solitons ＆ Fractals 17 （2003） 669] to the Broer-Kaup system with variable coefficients, abundant new soliton-like solutions and multl-solitonlike solutions are derived. Based on the derived multi-soliton-like solutions which contain arbitrary functions, some interesting multi-soliton structures are revealed.
基金Sponsored by the Natural Science Foundation of Liaoning Province (Grant No.20092146)
文摘A novel method of deriving the electromagnetic dyadic Green＇s functions in an unbounded, lossless, reciprocal and homogeneous chiral media described by the constitutive relations D = εE ＋ jγB and H = jγE ＋ μ^-1B - （ωε）^-1γJ is given. The divergenceless and irrotational splitting of dyadic Dirac 8 function and Fourier transformation are used to directly obtain the divergenceless and irrotational component of spectral-domain dyadic Green＇s functions in chiral media. This method avoids using the dyadic Green＇s function eigenfunction expansion technique. The method given here can be generalized to a source-free region and an achiral case.
文摘Smart distribution grid needs data communication systems as a support to complete their important functions. The smart distribution grid of the data and information are increasingly adopting internet protocol and Ethernet technology. The IP addresses are more and more important for the smart distribution grid equipment. The current IPv4 protocol occupies a dominant position; therefore, the challenges of the evolution to IPv6 and network security are faced by data communication systems of the smart distribution grid. The importance of data communications network and its main bearer of business were described. The data communications network from IPv4 to IPv6 evolution of the five processes and four stages of the transition were analyzed. The smart distribution grid data communications network security and types of their offensive and defensive were discussed. And the data communications network security architecture was established. It covers three dimensions, the security level, the communications network security engineering and the communications network security management. The security architecture safeguards the evolution to IPv6 for the smart distribution grid data communication systems.
基金supported by the Natural Science Foundation of Shandong Province(No.ZR2009GQ012)
文摘A discrete fuzzy sliding mode variable structure controller was studied and designed for a class of electro-hydraulic servo system by means of the combination of sliding mode control theory and fuzzy control theory. Designed based on the exponential reaching law, paratmter e of conventional sliding mode controller is the key factor of system chattering, and is ~onal to it as well. In view of this, fuzzy control theory was introduced into the design to ensure the real- time adjusting of parameter e. Sinmlation results show that the sys tem chattering is eliminated perfectly, and the dynamic performance of the control system is improved effectively.
基金financially supported by the Strategic Priority Research Program (B type) of the Chinese Academy of Sciences (Grant No. XDB03010404)
文摘Identifying when, where, and how India and Asia collided is a prerequisite to better understand the evolution of the Himalayan-Tibetan Plateau. Whereas with essentially the same published paleomagnetic data, a large range of different India-Asia collision models have been proposed in the literature. Based upon the premise of a northwards-moving Indian plate during the Cretaceous times, we analyze the significant variations in relative paleolatitude produced by a nearly 90° counterclockwise(CCW)rotation of the plate itself during the Cretaceous. Interestingly, recent studies proposed a dual-collision process with a Greater India basin or post-Neo-Tethyan ocean for the India-Asia collision, mainly in the light of divergent Cretaceous paleolatitude differences of the Tethyan Himalaya between the observed values and expected ones computed from the apparent polar wander path of the Indian plate. However, we find that these varied paleolatitude differences are mainly resulted from a nearly 90° CCW rotation of a rigid/quasi-rigid Greater Indian plate during the Cretaceous. On the other hand, when the Indian craton and Tethyan Himalaya moved as two individual blocks rather than a united rigid/quasi-rigid Greater Indian plate before the India-Asia collision, current available Cretaceous paleomagnetic data permit only multiple paleogeographic solutions for the tectonic relationship between the Indian plate and the Tethyan Himalayan terrane. We therefore argue that the tectonic relationship between the Indian plate and the Tethyan Himalayan terrane cannot be uniquely constrained by current paleomagnetic data in the absence of sufficient geological evidence, and the so-called Greater India basin model is just one of the ideal scenarios.
基金supported by the National Natural Science Foundation of China(Grant No.61471338)the Knowledge Innovation Program of the Chinese Academy of Sciences,Youth Innovation Promotion Association CAS,President Fund of UCASCRSRI Open Research Program(Grant No.CKWV2015217/KY)
文摘The three-dimensional discontinuous deformation analysis(3D-DDA) is a promising numerical method for both static and dynamic analyses of rock systems. Lacking mature software, its popularity is far behind its ability. To address this problem, this paper presents a new software architecture from a software engineering viewpoint. Based on 3D-DDA characteristics, the implementation of the proposed architecture has the following merits. Firstly, the software architecture separates data, computing, visualization, and signal control into individual modules. Secondly, data storage and parallel access are fully considered for different conditions. Thirdly, an open computing framework is provided which supports most numerical computing methods; common tools for equation solving and parallel computing are provided for further development. Fourthly, efficient visualization functions are provided by integrating a variety of visualization algorithms. A user-friendly graphical user interface is designed to improve the user experience. Finally, through a set of examples, the software is verified against both analytical solutions and the original code by Dr. Shi Gen Hua.
文摘If L is a link with two components and S1,S2…, Sn a switching sequence such that SnSn-1…S1L is unlinked, it is proved that lk（L） =∑i=1^nεi（L） and any link L can be transformed a n-twisting L~ by switching some crossings with the linking number：lk（L）=∑i=1^mεiC（EiL）＋n
基金supported by the National Natural Science Foundation of China(Grant Nos.12122202,12002032,and 12002031).
文摘A mechanical metamaterial that has a tailorable coefficient of thermal expansion(CTE)is promising for guaranteeing the reliability of electrical and optical instruments under thermal fluctuations.Despite growing research on the design and manufacturing of metamaterials with extraordinary CTEs,it remains challenging to achieve a nearly isotropic tailorable CTE while ensuring a sufficient load bearing capacity for applications,such as mechanical supporting frames.In this research,we propose a type of bi-metallic lattice whose CTE is artificially programmed from positive(75 ppm/K)to negative(−45 ppm/K),and whose equivalent modulus can be as high as 80 MPa.The bi-metallic lattice with a tailorable CTE in two orthogonal directions can be readily assembled without special modifications to construct large-scale planar structures with desired isotropic CTEs.A theoretical model that considers the actual configuration of the bi-metallic joint is developed;the model precisely captures the thermal deformations of lattice structures with varied geometries and material compositions.Guided by our theoretical design method,planar metallic structures that were manufactured using Al,Ti,and Invar alloy were experimentally characterized;the structures exhibited outstanding performance when compared with typical engineering materials.
