2015年跆拳道世界锦标赛男子运动员变线技术的运用特征分析

本文使用文献资料法、录像观察法、数理统计法和逻辑分析法等研究方法,对2015年跆拳道世界锦标赛男子运动员为男子运动员组合动作中的变线技术动作的运用进行了详细分析。

高铁桥梁施工中大型施工车辆变线技术分析

高铁桥梁建设项目增多,在施工中经常用到大型运输车辆,几十吨位甚至几百吨位的运输车辆在施工中只有通过变线操作,才能实现高铁桥梁预制梁的运输到位与安装。本文阐述了高铁桥梁施工中大型施工车辆变线技术的含义和必要性。分析了高铁桥梁施工中大型车辆变线技术在应用中存在的一些问题,并针对这些问题提出改进措施。

Mechanism of the genetic mutagenesis effects of far infrared ray laser

We have analyzed the order-disordering variance due to resonance effect and the nonlinear behavior of far infrared ray laser (FIRL)-biological system interaction.The analytic results show that the interaction between the living biological system and FIRL can produce resonance excitation effect,and so the original high ordered state of the system can be destroyed and thus the conformation variation in the system can be produced under further action of the laser.In addition,we have analyzed the nonlinear properties of the FIRL bio-molecule interaction and explained the mutagenesis effects of FIRL.The theoretic analysis is consistent with the results of FIRL mutagenesis breeding test.

Dynamic Target Wireless Network Selection Technique Using Fuzzy Linguistic Variables

Even though various wireless Net- work Access Technologies （NATs） with dif- ferent specifications and applications have been developed in the recent years, no single wireless technology alone can satisfy the any- time, anywhere, and any service wire- less-access needs of mobile users. A real seamless wireless mobile environment is only realized by considering vertical and horizontal handoffs together. One of the major design issues in heterogeneous wireless networks is the support of Vertical Handoff （VHO）. VHO occurs when a multi-interface enabled mobile terminal changes its Point of Attachment （PoA） from one type of wireless access technology to another, while maintaining an active session. In this paper we present a novel multi-criteria VHO algorithm, which chooses the target NAT based on several factors such as user preferences, system parameters, and traf- tic-types with varying Quality of Service （QoS） requirements. Two modules i.e., VHO Neces- sity Estimation （VHONE） module and target NAT selection module, are designed. Both modules utilize several ＂weighted＂ users＇ and system＇s parameters. To improve the robust- ness of the proposed algorithm, the weighting system is designed based on the concept of fuzzy linguistic variables.

AN EFFICIENT SIMULATION OF MULTIPLE CORRELATED RAYLEIGH FADING ENVELOPES

In order to better assess the performance of wireless communication systems,it is desirable to produce multiple Rayleigh fading envelopes with specified correlations.In this paper,we analyze theoretically a procedure which generates correlated Gaussian random variables from independent Gaussian random variables and give a physical explanation for the limitation of this procedure.Then,based on some uncorrelated Rayleigh fading envelopes,a simple but efficient procedure for generating an arbitrary number of cross-correlated Rayleigh fading envelopes is proposed.Simulation results and computational complexity analysis are presented,which show that the proposed method has some advantages,such as high accuracy,low computational complexity and easy implementation,over the conventional simulation method.

Statistically Downscaled Temperature Scenarios over China

Monthly mean temperatures at 562 stations in China are estimated using a statistical downscaling technique. The technique used is multiple linear regressions （MLRs） of principal components （PCs）. A stepwise screening procedure is used for selecting the skilful PCs as predictors used in the regression equation. The predictors include temperature at 850 hPa （7）, the combination of sea-level pressure and temperature at 850 hPa （P＋T） and the combination of geo-potential height and temperature at 850 hPa （H＋T）. The downscaling procedure is tested with the three predictors over three predictor domains. The optimum statistical model is obtained for each station and month by finding the predictor and predictor domain corresponding to the highest correlation. Finally, the optimum statistical downscaling models are applied to the Hadley Centre Coupled Model, version 3 （HadCM3） outputs under the Special Report on Emission Scenarios （SRES） A2 and B2 scenarios to construct local future temperature change scenarios for each station and month, The results show that （1） statistical downscaling produces less warming than the HadCM3 output itself; （2） the downscaled annual cycles of temperature differ from the HadCM3 output, but are similar to the observation; （3） the downscaled temperature scenarios show more warming in the north than in the south; （4） the downscaled temperature scenarios vary with emission scenarios, and the A2 scenario produces more warming than the B2, especially in the north of China.

Monitoring of coastline changes along the Red Sea,Yemen based on remote sensing technique

The coastline changes along Yemen＇s the Red Sea （Al-muka, Al-khohah, Al-tiaf, Ras Katib and Al- Urji spits） were studied using a series of landsat images （MSS, TM and ETM ＋ , 1972, 1989, 2000, 2006）, coupled with geomorphological, sedimentological and meteorological findings. Comparison of satellite images provided a viable means for establishing long-term coastal changes （accretion and erosion） as observed in the studied spits （Al-Urj, Ras Sham, Ras Maemoon, Ras Katib, Al-Mandar, Nukhaylah, Mujamilah, Ras Ashab Abu-Zahr and Mukha）. The rate of the spit accretion has the greatest value up to 89 pixel/year corresponding to 72 290 m2/year in Mukha, while the spit erosion shows greatest value up to 131 pixel/year corresponding to 106 404 m2/year in Mujamilab. The patterns of accretion and erosion along the spits depend on the spit direction, natural processes mainly of wave-induced longshore currents, the sediments supply and depth of sea.

Development of CAN-Based Distributed Control System for Variable Rate Technology in Agricultural Machinery

The number of electronic devices connected to agricultural machinery is increasing to support new agricultural practices tasks related to the Precision Agriculture such as spatial variability mapping and Variable Rate Technology （VRT）. The Distributed Control System （DCS） is a suitable solution for decentralization of the data acquisition system and the Controller Area Network （CAN） is the major trend among the embedded communications protocols for agricultural machinery and vehicles. The application of soil correctives is a typical problem in Brazil. The efficiency of this correction process is highly dependent of the inputs way at soil and the occurrence of errors affects directly the agricultural yield. To handle this problem, this paper presents the development of a CAN-based distributed control system for a VRT system of soil corrective in agricultural machinery. The VRT system is composed by a tractor-implement that applies a desired rate of inputs according to the georeferenced prescription map of the farm field to support PA （Precision Agriculture）. The performance evaluation of the CAN-based VRT system was done by experimental tests and analyzing the CAN messages transmitted in the operation of the entire system. The results of the control error according to the necessity of agricultural application allow conclude that the developed VRT system is suitable for the agricultural productions reaching an acceptable response time and application error. The CAN-Based DCS solution applied in the VRT system reduced the complexity of the control system, easing the installation and maintenance. The use of VRT system allowed applying only the required inputs, increasing the efficiency operation and minimizing the environmental impact.

Wireless environmental monitoring system for transformer substation based on acoustic sensor

In this paper, an indoor environmental monitoring solution is proposed for the transformer sub- station system by using the ZigBee technology. It mainly analyzes the principle of sulfur hexafluoride sensor based on the acoustic method and puts forward a difference data processing method of single- channel and temperature compensation point at power consumption issues for sensor detection. The method not only reduces the sensor power consumption, but also ensures the accuracy and extends the lifetime of wireless sensor nodes effectively. This paper also analyzes the design of the base sta- tion mode, and demonstrates the running processes of routers and sensors. The feasibility of the pro- posed approach has been testified and proved.

Can coordination variability identify performance factors and skill level in competitive sport? The case of race walking

Background:Marginal changes in the execution of competitive sports movements can represent a significant change for performance success.However,such differences may emerge only at certain execution intensities and are not easily detectable through conventional biomechanical techniques.This study aimed to investigate if and how competition standard and progression speed affect race walking kinematics from both a conventional and a coordination variability perspective.Methods:Fifteen experienced athletes divided into three groups(elite,international,and national) were studied while race walking on a treadmill at two different speeds(12.0 and 15.5 km/h).Basic gait parameters,the angular displacement of the pelvis and lower limbs,and the variability in continuous relative phase between six different joint couplings were analyzed.Results:Most of the spatio-temporal,kinematic,and coordination variability measures proved sensitive to the change in speed.Conversely,non-linear dynamics measures highlighted differences between athletes of different competition standard when conventional analytical tools were not able to discriminate between different skill levels.Continuous relative phase variability was higher for national level athletes than international and elite in two couplings(pelvis obliquity—hip flex/extension and pelvis rotation—ankle dorsi/plantarflexion) and gait phases(early stance for the first coupling,propulsive phase for the second) that are deemed fundamental for correct technique and performance.Conclusion:Measures of coordination variability showed to be a more sensitive tool for the fine detection of skill-dependent factors in competitive race walking,and showed good potential for being integrated in the assessment and monitoring of sports motor abilities.

Slope stability analysis considering joined influences of nonlinearity and dilation

The soil masses of slopes were assumed to follow a nonlinear failure criterion and a nonassociated flow rule.The stability factors of slopes were calculated using vertical slice method based on limit analysis.The potential sliding mass was divided into a series of vertical slices as well as the traditional slice technique.Equating the external work rate to the internal energy dissipation,the optimum solutions to stability factors were determined by the nonlinear programming algorithm.From the numerical results,it is found that the present solutions agree well with previous results when the nonlinear criterion reduces to the linear criterion,and the nonassociated flow rule reduces to the associated flow rule.The stability factors decrease by 39.7%with nonlinear parameter varying from 1.0 to 3.0.Dilation and nonlinearity have significant effects on the slope stability factors.

Variable Rate Technology and Cotton Yield Response in Texas

Variable Rate Technology （VRT） takes within-field variability into consideration and aims to match resource application to crop requirement. Even though Texas is the most important cotton producing state in the US, the rate of VRT adoption is very low here. Hence, analyzing the factors influencing the adoption and providing a regional estimate of the impact of VRT adoption on cotton yield is very important. This study used the 2009 Southern Cotton Precision Farming Survey to analyze the farm and farmer characteristics affecting the adoption of VRT among Texas cotton farmers and to empirically estimate the impact of adoption of VRT on cotton yield in Texas. A two-stage least square procedure with a logistic regression model in the first stage and a multiple linear regression model in the second stage was used to analyze the data. The study revealed that there are significant regional differences in adoption pattern within the state of Texas; and the farmers from the coastal region, where there is higher within-field variability, were more likely to adopt VRT compared to other regions. Younger farmers, farmers managing larger farms, and farmers who use computers for farming operations were more likely to adopt VRT. The results also showed that, on an average, the adoption of VRT does not lead to significant yield improvements for cotton in Texas. Since the impact of VRT adoption on yield is not significant, the source of economic advantage of VRT adoption in Texas may be the reduction of input cost.

Transient Power and Quality Events Analysed Using Hilbert Transforms

This work presents an advanced mathematical tool applicable to the recognition and classification of power system transients and disturbances. Disturbances without a periodic pattern or with a non-linear pattern require a more suitable tool than the Fourier series （Fast Fourier or Windowed Fourier Transforms）. To overcome these drawbacks, other tools have been broadly used, such as the wavelet transform. However, the wavelet transform also has some drawbacks such as the lack of adaptivity or interpretation of nonlinear phenomena that the Hilbert and Hilbert Huang Transform techniques could mitigate. The Hilbert techniques transform a time domain function into a space representation both in time and frequency. In the paper, the technique is applied to analyse several short-term and steady events, like a short circuit, a capacitor-switching transient, or a line energisation, showing the abilities of the Hilbert-based transforms.

Standing,Periodic and Solitary Waves in (1+1)-Dimensional Caudry-Dodd-Gibbon-Sawada-Kortera System

In the paper, the variable separation approach, homoclinic test technique and bilinear method are successfullyextended to a (1+1)-dimensional Caudry-Dodd-Gibbon-Sawada-Kortera (CDGSK) system, respectively.Basedon the derived exact solutions, some significant types of localized excitations such as standing waves, periodic waves,solitary waves are simultaneously derived from the (1+1)-dimensional Caudry-Dodd-Gibbon-Sawada-Kortera systemby entrancing appropriate parameters.

A new technique for deriving the quiet day curve from imaging riometer data at Zhongshan Station, Antarctic

A new technique for estimating quiet day curve(QDC)was suggested.To validate the new approach,QDCs were derived from data acquired by the imaging riometer installed at the Chinese Zhongshan Station in Antarctic.The evaluation was performed by comparing the difference between QDC derived by the new technique and those derived by Tanaka’s technique.The results were discussed in terms of the diurnal variation and discrepancy.Also,cosmic noise absorption(CNA)images were built using both techniques in order to evaluate the implications of the changes when obtaining them using different methods of the QDC determination.The influence of the multiplicative factor value on the QDC determination in Tanaka’s technique was evaluated.

Correlation between ^(29)Si polymerization and cementitious activity of coal gangue

A new method for estimating the degree of [SiO4]4-polymerization of coal gangue is presented. The method uses the relative bridging oxygen number (RBO) based on nuclear magnetic resonance (NMR) techniques. X-ray diffraction (XRD) and 29Si NMR techniques have been used to study phase transitions and silicate polymerization of coal gangue calcined at different temperatures or co-calcined. It has been found that phase transition of clay minerals causes silicate polymerization to change with temperature. In this study, cementing activity and RBO were determined to be inversely related. Generally, activated coal gangue with lower RBO had better cementitious activity.

Calculation model of AC loss for CICC(cable-in-conduit conductor) based on strain

The CICC (cable-in-conduit conductor) in ITER (International Thermal-nuclear Experimental Reactor) will run in high-current, fast transient magnet field and complex environment. In response to the impact of magnet fields above 10 T, the Nb3Sn conductor has been introduced. However, the AC (alternating current) loss mechanism of Nb3Sn conductor on strain has not been explored. So, it is necessary to study the AC loss calculation method with transient electromagnetic field and wide range of strain, the coupling current in complex field and current signal of field is simplified to the spectrum effects of coil excitation, and calculation technology of AC loss, which contains the frequency, magnet field, coil characteristics and other parameters, is constructed to meet the discrete Fourier transform (DFT). By comparative analysis of simulation, it is found that the AC loss calculation of the conductor with spectrum algorithm is closer to the actual project value than the traditional algorithm. For the rapid excitation, in particular plasma discharge and burst, spectrum algorithm and the traditional algorithm are consistent. For the relative error calculation of hysteresis loss and coupling loss, it is found that the coupling loss is cumulative linearly, where the hysteresis loss is not so. As a function of the amplitude, frequency and phase angle, the relative error is less than 40%. The results showed that the method of Fourier restructuring is satisfactory.

Transformer Partial Discharge Monitoring Based on Optical Fiber Sensing

The power transformer is the most important equipment of the high voltage power grid, however, some traditional methods of online partial discharge monitoring have some limitations. Based on many advantages of the optical fiber sensing technology, we have done some research on fiber optics Fabry-Perot （FP） sensing which can be useful for the transformer on online partial discharge monitoring. This research aimed at improving the reliability of power system safety monitoring. We have done some work as follows： designing a set for fiber optics FP sensor preparation, according to the fabrication procedure strictly making out the sensors, building a reasonable signal demodulation system for fiber optics FP sensing, doing a preliminary analysis about online partial discharge signal monitoring, including the research on different discharge intensities with the same measuring distance and different measuring distances with the same discharge intensity, and then making a detailed analysis of the experimental results.