期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
连续可变能容双泵轮液力变矩器的设计及分析 被引量:1
1
作者 马文星 冀龙飞 +1 位作者 许文 刘春宝 《华南理工大学学报(自然科学版)》 EI CAS CSCD 北大核心 2016年第3期36-43,共8页
以某高性能普通三元件向心涡轮液力变矩器为参考样机,确定循环圆有效直径为425 mm,采用相似设计法得到同性能液力变矩器,并将其作为基准型,通过合理分割基准型泵轮叶片得到双泵轮液力变矩器的循环圆和叶片.设计了滑差离合器结构,给出了... 以某高性能普通三元件向心涡轮液力变矩器为参考样机,确定循环圆有效直径为425 mm,采用相似设计法得到同性能液力变矩器,并将其作为基准型,通过合理分割基准型泵轮叶片得到双泵轮液力变矩器的循环圆和叶片.设计了滑差离合器结构,给出了滑差离合器及摩擦片的主要技术参数.运用计算流体动力学(CFD)方法对所设计的双泵轮液力变矩器进行数值模拟,分别获得双泵轮状态、单泵轮状态及滑差状态3种状态下的能容特性和原始特性.通过对比分析可知,所设计的双泵轮液力变矩器能够通过滑差控制实现能容的连续可控性,可应用于装载机发动机与变矩器的变能容匹配. 展开更多
关键词 双泵轮液力矩器 滑差控制 性能预测 滑差离合器 变能容
下载PDF
新型轴流导叶可调液力变矩器设计与分析 被引量:4
2
作者 马文星 王文博 刘春宝 《液压与气动》 北大核心 2015年第12期1-6,共6页
采用"两圆弧+直线"的设计方法设计了有效直径370 mm的新型轴流导叶可调液力变矩器循环圆;运用等倾角射影法设计了新型轴流导叶可调液力变矩器各叶轮叶片的叶形,并给出了其总体结构。为了实现导轮叶片的转动,设计了导叶调节机... 采用"两圆弧+直线"的设计方法设计了有效直径370 mm的新型轴流导叶可调液力变矩器循环圆;运用等倾角射影法设计了新型轴流导叶可调液力变矩器各叶轮叶片的叶形,并给出了其总体结构。为了实现导轮叶片的转动,设计了导叶调节机构和导轮内外环结构,阐述了实现导轮叶片转动的过程,并定义了导叶开度的变化范围。运用CFD方法对所设计的新型轴流导叶可调液力变矩器进行数值模拟计算,获得了其原始特性,并对其特性进行了分析。由分析可知,通过调节导叶开度的变化能够实现轴流导叶可调液力变矩器能容的连续可控。由于其连续可控的能容特性,在与发动机共同工作时能够实现动态匹配,进而提高整机性能。 展开更多
关键词 液力矩器 导叶开度 性能预测 变能容 轴流导叶可调
下载PDF
Influence of Zeotropic Mixtures' Temperature Gliding on the Performance of Heat Transfer in Condenser or Evaporator 被引量:4
3
作者 赵力 高攀 《Transactions of Tianjin University》 EI CAS 2005年第6期400-406,共7页
Many zeotropic refrigerant mixtures are proposed as alternatives to some chlorofluorocar-bons (CFCs) and hydrochlorofluorocarbons ( HCFCs). An advantage of zeotropic mixtures is the possibility of reduction in entropy... Many zeotropic refrigerant mixtures are proposed as alternatives to some chlorofluorocar-bons (CFCs) and hydrochlorofluorocarbons ( HCFCs). An advantage of zeotropic mixtures is the possibility of reduction in entropy generation by matching the temperature glidings of refrigerant and heat-transfer fluid in both condenser and evaporator. Zeotropic mixtures are compared with pure re-frigerants to evaluate their exergetic losses. On the other hand, the special phenomena which result from temperature gliding are proved by experiments. A simple equation is obtained, to evaluate dif-ferent zeotropic mixtures' exergetic losses. The maximum flow rate of heat-transfer fluids is found in order that refrigerants phase change can be completed. Lastly, some examples of zeotropic mix-tures ( R407C, R405A and R414B) are given, and their exergetic losses and maximum flow rate of heat-transfer fluids in condenser are forecasted. 展开更多
关键词 zeotropic mixtures temperature gliding exergetic loss maximum flow rate
下载PDF
A new capacitive borehole tiltmeter for crustal deformation measurement and its performance analysis
4
作者 Wu Liheng Li Tao +1 位作者 Chen Zheng Li Hong 《International Journal of Mining Science and Technology》 SCIE EI CSCD 2015年第2期285-290,共6页
Borehole inclinometers are important observation instruments used to measure ground tilt movement and monitor crustal deformation of solid tides and geological landslide disasters.They are widely used in oil explorati... Borehole inclinometers are important observation instruments used to measure ground tilt movement and monitor crustal deformation of solid tides and geological landslide disasters.They are widely used in oil exploration,mineral resource drilling,well logging,exploration and other fields.There is potential for development of rock stress strain monitoring tools.Many types of tiltmeters have been installed,such as SQ-7,FSQ,VS and JB.However,these tiltmeters are generally installed in a deep cave to avoid the interference of temperature,humidity,and human activities.With the urbanization of human society,suitable installation locations are difficult to find.To solve the problem,a two-component borehole tiltmeter,named the CBT-type tiltmeter,is proposed in this paper.It can be installed in a borehole less than500 m deep to eliminate environmental influences.The tiltmeter is composed of two sophisticated gravitational swing and two capacitive transducers.From preliminary theory and experiment analysis,its linear correlation coefficient is higher than 0.99,its co-seismic response is rapid and its noise level is up to 10 4arc seconds in practice. 展开更多
关键词 Tiltmeter Solid tide Crustal deformation High precision
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部