This work aims at selecting optimal operating variables to obtain the minimum specific energy(SE) in sawing of rocks.A particular granite was sampled and sawn by a fully automated circular diamond sawblades.The periph...This work aims at selecting optimal operating variables to obtain the minimum specific energy(SE) in sawing of rocks.A particular granite was sampled and sawn by a fully automated circular diamond sawblades.The peripheral speed,the traverse speed,the cut depth and the flow rate of cooling fluid were selected as the operating variables.Taguchi approach was adopted as a statistical design of experimental technique for optimization studies.The results were evaluated based on the analysis of variance and signal-to-noise ratio(S/N ratio).Statistically significant operating variables and their percentage contribution to the process were also determined.Additionally,a statistical model was developed to demonstrate the relationship between SE and operating variables using regression analysis and the model was then verified.It was found that the optimal combination of operating variables for minimum SE is the peripheral speed of 25 m/s,the traverse speed of 70 cm/min,the cut depth of 2 cm and the flow rate of cooling fluid of 100 mL/s.The cut depth and traverse speed were statistically determined as the significant operating variables affecting the SE,respectively.Furthermore,the regression model results reveal that the predictive model has a high applicability for practical applications.展开更多
A new digital transmitter based on delta sigma modulator( DSM) with bus-splitting is presented in this paper. The second order low pass error-feedback delta sigma modulator( EF-DSM) is focused. The signal to noise rat...A new digital transmitter based on delta sigma modulator( DSM) with bus-splitting is presented in this paper. The second order low pass error-feedback delta sigma modulator( EF-DSM) is focused. The signal to noise ratio( SNR) of the EF-DSM is derived for different bus-splitting bits.Following the EF-DSM,a multi-bit digital up mixer is used for carrier frequency transform. In order to validate the theory of bus-splitting,two types of transmitters are implemented on FPGA for comparison,in which one is with non-bus-splitting and the other is with bus-splitting. The FPGA implemented transmitter with bus-splitting promotes the maximum operation speed by 39%,and reduces hardware consumptions more than 16%. Both single tone and orthogonal frequency division multiplexing( OFDM) signal source are used to evaluate the proposed transmitter.展开更多
This paper analyzes a DFIG （doubly fed induction generator） WT （wind turbine） fault current after a symmetrical network voltage dip. The goal is to identify the factors determining how fast the first zero crossing...This paper analyzes a DFIG （doubly fed induction generator） WT （wind turbine） fault current after a symmetrical network voltage dip. The goal is to identify the factors determining how fast the first zero crossings of the fault current occur. This is an important subject because the ftmdamental property of the CB （circuit breaker） is that it breaks the current when the current is very near zero. The study was conducted using a hardware-in-the-loop test environment constructed using two real time simulators （dSPACE and RTDS） and a commercial protection relay. It is found that the reactive current injection during a voltage dip demanded by the grid codes enhances the operation of the WT protection because the zero crossings of the currents through CB are attained earlier. In addition, the size of the crowbar resistance has a significant influence on the zero crossings.展开更多
In many ways, digital practices have precipitated remarkable changes in the global accessibility of art. However, the digital revolution has also radically influenced the conservation processes surrounding art, includ...In many ways, digital practices have precipitated remarkable changes in the global accessibility of art. However, the digital revolution has also radically influenced the conservation processes surrounding art, including archiving, preserving, and remembering. This paper explores the conservation of digital （or ＂variable media＂） artworks for the future benefit of culture, with particular reference to creators and viewers of art, as well as participants in interactive artworks. More specifically, this paper focuses on the philosophical and technical approaches adopted by creators, conservators, and philosophers involved in the preservation of variable media artworks. Issues of programming, interoperability between archival systems, and enhanced public access increasingly inform the design of digital archives. Indeed, the continuously shifting technological landscape-marked by the centrality of digital technologies to everyday life-problematizes the preservation of digital art through mainstream museological paradigms. Part of this analysis of digital art conservation will be drawn from the archival philosophies of Boris Groys and Rick Prelinger.展开更多
文摘This work aims at selecting optimal operating variables to obtain the minimum specific energy(SE) in sawing of rocks.A particular granite was sampled and sawn by a fully automated circular diamond sawblades.The peripheral speed,the traverse speed,the cut depth and the flow rate of cooling fluid were selected as the operating variables.Taguchi approach was adopted as a statistical design of experimental technique for optimization studies.The results were evaluated based on the analysis of variance and signal-to-noise ratio(S/N ratio).Statistically significant operating variables and their percentage contribution to the process were also determined.Additionally,a statistical model was developed to demonstrate the relationship between SE and operating variables using regression analysis and the model was then verified.It was found that the optimal combination of operating variables for minimum SE is the peripheral speed of 25 m/s,the traverse speed of 70 cm/min,the cut depth of 2 cm and the flow rate of cooling fluid of 100 mL/s.The cut depth and traverse speed were statistically determined as the significant operating variables affecting the SE,respectively.Furthermore,the regression model results reveal that the predictive model has a high applicability for practical applications.
基金Supported by the National Natural Science Foundation of China(No.61674037)National Key Research and Development Program of China(No.2016YFC0800400)+1 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe National Power Grid Corp Science and Technology Project(No.SGTYHT/16-JS-198)
文摘A new digital transmitter based on delta sigma modulator( DSM) with bus-splitting is presented in this paper. The second order low pass error-feedback delta sigma modulator( EF-DSM) is focused. The signal to noise ratio( SNR) of the EF-DSM is derived for different bus-splitting bits.Following the EF-DSM,a multi-bit digital up mixer is used for carrier frequency transform. In order to validate the theory of bus-splitting,two types of transmitters are implemented on FPGA for comparison,in which one is with non-bus-splitting and the other is with bus-splitting. The FPGA implemented transmitter with bus-splitting promotes the maximum operation speed by 39%,and reduces hardware consumptions more than 16%. Both single tone and orthogonal frequency division multiplexing( OFDM) signal source are used to evaluate the proposed transmitter.
文摘This paper analyzes a DFIG （doubly fed induction generator） WT （wind turbine） fault current after a symmetrical network voltage dip. The goal is to identify the factors determining how fast the first zero crossings of the fault current occur. This is an important subject because the ftmdamental property of the CB （circuit breaker） is that it breaks the current when the current is very near zero. The study was conducted using a hardware-in-the-loop test environment constructed using two real time simulators （dSPACE and RTDS） and a commercial protection relay. It is found that the reactive current injection during a voltage dip demanded by the grid codes enhances the operation of the WT protection because the zero crossings of the currents through CB are attained earlier. In addition, the size of the crowbar resistance has a significant influence on the zero crossings.
文摘In many ways, digital practices have precipitated remarkable changes in the global accessibility of art. However, the digital revolution has also radically influenced the conservation processes surrounding art, including archiving, preserving, and remembering. This paper explores the conservation of digital （or ＂variable media＂） artworks for the future benefit of culture, with particular reference to creators and viewers of art, as well as participants in interactive artworks. More specifically, this paper focuses on the philosophical and technical approaches adopted by creators, conservators, and philosophers involved in the preservation of variable media artworks. Issues of programming, interoperability between archival systems, and enhanced public access increasingly inform the design of digital archives. Indeed, the continuously shifting technological landscape-marked by the centrality of digital technologies to everyday life-problematizes the preservation of digital art through mainstream museological paradigms. Part of this analysis of digital art conservation will be drawn from the archival philosophies of Boris Groys and Rick Prelinger.
