网络口碑对网络销售农产品的作用机理——基于“天猫”某品牌茶叶销售的实证研究

以网络广泛销售的农产品———茶叶为研究对象,在收集并处理网上顾客评论数据的基础上,探究网络口碑对这类农产品线上销售的作用机理。在控制相关内生性因素的前提下,建立农产品网络口碑弹性模型EK,并对面板数据进行分位数回归分析。结果表明,在农产品网络销售中,网络口碑数量、评分及产品价格对农产品的销售都有显著影响。在不同销量分位数下,各变量对销量的影响不同:口碑数量的弹性趋势相对平稳;口碑评分弹性则呈现出不规则的U型趋势;价格的弹性值均为负,整体走势趋于缓慢上升。

Application of jet main region specification model in CFD simulation for room air movement analysis

This paper analyzes the applications of four air terminal device（ATD）models（i.e.,the basic model,the box model,the N-point momentum model,the jet main region specification model）in computational fluid dynamics（CFD）simulation and their performance in case study.A full-scale experiment is performed in an environment chamber,and the measured air velocity and temperature fields are compared with the simulation results by using four ATD models.The velocity and temperature fields are measured by an omni-directional thermo-anemometer system.It demonstrates that the basic model and the box model are not applicable to complicated air terminal devices.At the occupant area,the relative errors between simulated and measured air velocities are less than 20% based on the N-point momentum model and the jet main region specification model.Around the ATD zone,the relative error between the numerical and measured air velocity based on the jet main region specification model is less than 15%.The jet main region specification model is proved to be an applicable approach and a more accurate way to study the airflow pattern around the ATD with complicated geometry.

Composition of Model Interface--A Theorem of Model Composition

Building a model for a object through model composition is a interesting topics, this paper research the interface composit ion of models in the Zeigler’s modeling methodology DEVS.

RESEARCH OF B2B E-COMMERCE SYSTEM MODEL BASED ON WEB SERVICE

B2B E Commerce is one of the most potential electronic commerce forms at present. But since traditional B2 B E Commerce system lacks an unified standard and solution of basic architectur e a nd interface, it has many shortcomings such as poor reusability and poor extensi bility. In order to solve the problem, combined with Web Service technology, a B 2B E Commerce system model based on Web Service is proposed and analyzed. The m odel can combine relatively independent Web Service on Intranet and Internet by constructing core application program. As a part of supply chain, it can also pr ovide a standard interface for other applications such as ERP/CRM/SCM, etc. Th er efore, B2B E Commerce system with this form is easy for development, integratio n and maintenance. Finally, a solution of B2B E Commerce system based on Web Se rvice is propounded by introducing an instance.

Computer aided stitching approach for dental restoration models

According to the bio-characteristics of the lower and upper cavity surfaces of dental restoration, a stitching approach is proposed based on a virtual zipper working mechanism and a minimization of the surface total curvature energy, which is used to resolve the stitching problems existing during computer-aided design for dental restorations. First, the two boundaries corresponding to the lower and upper surfaces are triangulated based on the zipper working mechanism to generate the initial stitching surface patch, of which the edges are distributed uniformly between the boundaries. Secondly, the initial stitching surface patch is subdivided and deformed to reconstruct an optimized surface patch according to the bio-characteristics of the teeth. The optimized surface patch is minimally distinguishable from the surrounding mesh in smoothness and density, and it can stitch the upper and lower cavity surfaces naturally. The experimental results show that the dental restorations obtained by the proposed method can satisfy both the shape aesthetic and the fitting accuracy, and meet the requirements of clinical oral medicine.

Optimization method for evacuation zone with network reconfiguration based on dynamic simulation

Abstract： With a determinate danger zone and evacuation demand caused by an emergency, an optimization method for the evacuation zone with network reconfiguration based on dynamic simulation is proposed. The method contains three modules. First, the network in the evacuation zone is optimized by a model with the integrated strategy of lane reversal and intersection conflict elimination. Secondly, the dynamic evacuation simulation model based on the cell transmission model is applied to simulate the dynamic propagation process of evacuated vehicles in the network in the evacuation zone. The evacuation time for all evacuated vehicles leaving the danger zone is obtained and the setting of the current evacuation zone is fed back. Thirdly, the arrival distributions of evacuated vehicles at critical intersections of the evacuation zone are also obtained to estimate the delay at critical intersection to determine whether the intersection should be taken as the critical intersection in the next iteration. The evacuation zone is expanded gradually through iteration, and the reasonable evacuation zone and the optimal evacuation network is confirmed. Based on the survey of the parking lot and urban street network around Nanjing Olympic Sports Center, the models and the iterative algorithm were applied to obtain the optimal plan of the evacuation zone with network reconfiguration in an evacuation situation to verify the validity of the proposed method.

高强度塑料波纹管连续成型产出工艺及装备

对高强度塑料波纹管连续成型制作工艺及相关装备进行了概述,并对生产实践中相关部位的技术条件作了初步的分析说明。

An Optimal Algorithm for the Retrieval of Chlorophyll,Suspended Sediments and Gelbstoff of Case Ⅱ Waters in the Pearl River Estuary

An optimal algorithm for the retrieval of chlorophyll, suspended sediments and gelbstoff of case Ⅱ waters in the Pearl River estuary was established with the optical parameters derived from the in-situ data obtained in Jan. 2003 in the same area. And then, the chlorophyll, suspended sediments and gelbstoff of the SeaWiFS pixels on Jan. 29, 2003 corresponding to the in-situ sites of Jan. 25 and 26, 2003 were synchronously retrieved, with average relative errors of 14.9%, 12.1% and 13.6% for chlorophyll, suspended sediments and gelbstoff, respectively. The research results indicated that the optimal retrieval algorithm established here was relatively fit for the retrieval of the chlorophyll, suspended sediments and gelbstoff of case Ⅱ waters in the Pearl River estuary, and had quite good retrieval accuracy.

Protective Effects of Oral Fructose-1, 6-diphosphate on Liver Injury in Animal Models

Aim To investigate the effects of FDP on different liver injury models to explore the possibility of FDP used as an oral liver protective agent. Methods Chronic liver injury model in rats was induced by carbon tetrachloride （ CCl4 ） ; Acute liver injury model in mice was induced by aminogalactose （GAIN） or lipopolysaccharide （LPS）. Results In CCl4-induced chronic liver injury model, FDP （1 , 4 g·kg^-1·d^-1, q.d., for 10 weeks） significantly lowered ALT, AST,γ-glutamyl transpeptidase （γ-GT）, alkaline phosphatase （ALP）, and total bilirubin （T-BIL） in serum compared with vehicle; simultaneously it evidently elevated abnormal total protein （TP）, albumin （ALB） and total cholesterol （ T-CHO ） levels in serum; it also dose-dependently reduced hydroxyproline contents in hepatic tissue. 4 g·kg^-1·d^-1 of FDP apparently decreased incidence of hepatic cirrhosis, and alleviated pathological changes of liver tissue. In GaiN-induced model, 1.0 - 4. 0 g·kg^-1·d^-1 of FDP （ bid, for 3 d ） significantly lowered alanine aminotransferase （ ALT ） and aspartate aminotransferase （ AST ） levels in serum ; it also decreased liver coefficient. 4. 0 g·kg^-1·d^-1 of FDP significantly alleviated pathological changes of cell ultra-structures. In LPS-induced model, only high dose of FDP （4. 0 g·kg^-1·d^-1, bid, for 12 d） significantly decreased ALT level in serum. Conclusion This study first demonstrated the protective effect of oral FDP on chronic liver injury caused by CCl4, and confirmed its effect on acute liver injury at the same time, suggesting that Long-term oral FDP is efficacious against liver injury induced by different factors and can be used as an oral liver protective agent in clinic.

Application of LINGO to the Solution of the Water Supply System′s Optimal Operation Model

In this research, LINGO is used successfully to solve the water supply system′s optimal operation model. Firstly, the language of LINGO and the using method were studied intensively, on the basis of which the model was transformed to LINGO form and solved successfully. Secondly, the research on the interface between LINGO and the popular office software was made. The optimization software was developed, which had Excel as the workspace and LINGO as the core of computation. Through practice, this software was found stable, easy to use and suitable for the application to the water supply corporations.

SPATIALIZATION MODEL OF POPULATION BASED ON DATASET OF LAND USE AND LAND COVER CHANGE IN CHINA

The spatialization of population of counties in China is significant. Firstly, we can gain the estimated values of population density adaptive to different kinds of regions. Secondly, we can integrate effectively population data with other data including natural resources, environment, society and economy, build 1km GRIDs of natural resources reserves per person, population density and other economic and environmental data, which are necessary to the national management and macro adjustment and control of natural resources and dynamic monitoring of population. In order to establish population information system serving national decision making, three steps ought to be followed:1) establishing complete geographical spatial data foundation infrastructure including the establishment of electric map of residence with high resolution using topographical map with large scale and high resolution satellite remote sensing data, the determination of attribute information of housing and office buildings, and creating complete set of attribute database and rapid data updating; 2) establishing complete census systems including improving the transformation efficiency from census data to digital database and strengthening the link of census database and geographical spatial database, meanwhile, the government should attach great importance to the establishment and integration of population migration database; 3) considering there is no GIS software specially serving the analysis and management of population data, a practical approach is to add special modules to present software system, which works as a bridge actualizing the digitization and spatialization of population geography research.

A plasticity model for sand-structure interfaces

The predictive capacity of numerical analyses in geotechnical engineering depends strongly on the efficiency of constitutive models used for modeling of interfaces behavior.Interfaces are considered as thin layers of the soil adjacent to structures boundary whose major role is transferring loads from structures to soil masses.An interface model within the bounding surface plasticity framework and the critical state soil mechanics is presented.To this aim,general formulation of the interface model according to the bounding surface plasticity theory is described first.Similar to granular soils,it has been shown that the mechanical behavior of sand-structure interfaces is highly affected by the interface state that is the combined influences of density and applied normal stress.Therefore,several ingredients of the model are directly related to the interface state.As a result of this feature,the model is enabled to distinguish interfaces in dense state from those in loose state and to provide realistic predictions over wide ranges of density and normal stress values.In evaluation of the model,a reasonable correspondence between the model predictions and the experimental data of various research teams is found.

FEM simulation of aluminum extrusion process in porthole die with pockets

In order to investigate the effects of pockets in the porthole die on the metal flow,temperature at the die bearing exit and the extrusion load were contrasted with the traditional die design without the pockets in the lower die.Two different multi-hole porthole dies with and without pockets in lower die were designed.And the extrusion process was simulated based on the commercial software DEFORM-3D.The simulation results show that the pockets could be used to effectively adjust the metal flow and especially benefit to the metal flow under the legs.In addition,the maximum temperature at the die bearing and the peak extrusion load decrease,which indicates the possibility of increasing the extrusion speed and productivity.

Simulated circulations off the Changjiang (Yangtze) River mouth in spring and autumn

The circulations off the Changjiang mouth in May and November were simulated by a three dimension numerical model with monthly averaged parameters of dynamic factors in this paper. The area covers the East China Sea (ECS), Yellow Sea and Bohai Sea. Simulated results show that the circulation off the Changjiang mouth in spring and autumn is mainly the Changjiang runoff and Taiwan Warm Current (TWC). The Changjiang discharge is much larger in May than in November, and the wind is westward in May, and southward in November off the Changjiang mouth. The runoff in May branches in three parts, one eastward flows, the other two flow northward and southward along the Subei and Zhejiang coast respectively. The Changjiang diluted water expands eastward off the mouth, and forms a strong salinity front near the mouth. Surface circulation in autumn is similar to that in winter, the runoff southward flows along the coast, and the northward flowing TWC becomes weaker compared to that in spring and summer. The bottom circulations in May and November are mainly the runoffnear the mouth and the TWC offthe mouth, and the runoff and TWC are greater in May than in November.

Vehicle actuation based short-term traffic flow prediction model for signalized intersections

Traffic flow prediction is an important component for real-time traffic-adaptive signal control in urban arterial networks.By exploring available detector and signal controller information from neighboring intersections,a dynamic data-driven flow prediction model was developed.The model consists of two prediction components based on the signal states(red or green) for each movement at an upstream intersection.The characteristics of each signal state were carefully examined and the corresponding travel time from the upstream intersection to the approach in question at the downstream intersection was predicted.With an online turning proportion estimation method,along with the predicted travel times,the anticipated vehicle arrivals can be forecasted at the downstream intersection.The model performance was tested at a set of two signalized intersections located in the city of Gainesville,Florida,USA,using the CORSIM microscopic simulation package.Analysis results show that the model agrees well with empirical arrival data measured at 10 s intervals within an acceptable range of 10%-20%,and show a normal distribution.It is reasonably believed that the model has potential applicability for use in truly proactive real-time traffic adaptive signal control systems.

Water Quality Evaluation in Tidal River Reaches of Liaohe River Estuary, China Using a Revised QUAL2K Model

Rivers in the Liaohe River Estuary area have been seriously polluted by discharges of wastewater containing petroleum pol- lutants and nutrients. In this paper, The Enhanced Stream Water Quality Model （QUAL2K） and its revised model as well as One-dimensional Tide Mean Model （1D model） were applied to predict and assess the water quality of the tidal fiver reach of the Liaohe River Estuary. Dissolved oxygen （DO）, biochemical oxygen demand （BODs）, ammonia nitrogen （NH3-N） and total phosphorus （TP） were chosen as water quality indices in the two model simulations. The modelled results show that the major reasons for degraded rivers remain petroleum and non-point source pollution. Tidal water also has a critical effect on the variation of water quality. The sensitivity analysis identifies that flow rate, point load and diffuse load are the most sensitive parameters for the four water quality indices in the revised QUAL2K simulation. Uncertainty analysis based on a Monte Carlo simulation gives the probability distribution of the four wa- ter quality indices at two locations （6.50 km and 44.84 km from the river mouth）. The statistical outcomes indicate that the observed data fall within the 90% confidence intervals at all sites measured, and show that the revised QUAL2K gives better results in simulating the water quality of a tidal fiver.

Modelling Impact of Dredging and Dumping in Ebb-Flood Channel Systems

For a channel-shoal system in a funnel-shaped basin the impact of dredging and dumping is investigated using a complex process-based model. First, the residual flow and sediment transport circulations are analysed for the channel-shoal pattern, which has emerged after a longterm model simulation. Results are compared to the Western Scheldt estuary, which forms the inspiration for this study. Subsequently, different dredge and dump scenarios are modelled, according to a conceptual model, in which ebb- and flood-channels and enclosed shoals form morphodynamic units (cells) with their own sediment circulation. Model results show that dumping sediment in a channel further reduces the channel depth and induces erosion in the opposite channel, which enhances tilting of the cross-section of the cell and eventually can lead to the degeneration of a multiple channel system into a single channel. The impact of different dredging and dumping cases agrees with results from a stability analysis. This means that this type of model applied to a realistic geometry can potentially be used for better prediction of the impact of human interventions.

Selection model of trip time for rural population

Referring to the 1 248 survey data of rural population in 14 provinces of China, the influencing factors of trip time choice were analyzed. Based on the basic theory of disaggregate model and its modelling method, nine grades were selected as the alternatives of trip time, the variables affecting time choice and the method getting their values were determined, and a multinomial logit (MNL) model was developed. Another 1 200 trip data of rural population were selected to testify the model's validity. The result shows that the maximum absolute error of each period between calculated value and statistic is 3.6%, so MNL model has high calculation accuracy.

Delamination analysis of woven fabrication laminates using cohesive zone model

A new test method was proposed to evaluate the cohesive strength of composite laminates. Cohesive strength and the critical strain energy for Mode-II interlamiar fracture of E-glass/epoxy woven fabrication were determined from the single lap joint(SLJ) and end notch flexure(ENF) test, respectively. In order to verify their adequacy, a cohesive zone model simulation based on interface finite elements was performed. A closed form solution for determination of the penalty stiffness parameter was proposed. Modified form of Park-Paulino-Roesler traction-separation law was provided and conducted altogether with trapezoidal and bilinear mixed-mode damage models to simulate damage using Abaqus cohesive elements. It was observed that accurate damage prediction and numerical convergence were obtained using the proposed penalty stiffness. Comparison between three damage models reveals that good simulation of fracture process zone and delamination prediction were obtained using the modified PPR model as damage model. Cohesive zone length as a material property was determined. To ensure the sufficient dissipation of energy, it was recommended that at least 4 elements should span cohesive zone length.

A Model for Analyzing the Transshipment Competition Relationship Between the Port of Hong Kong and the Port of Kaohsiung

The transshipment is an important issue in the current marine transportation. This paper constructed a mathematical programming model to elaborate the transshipment port selection for the shipping company. This model is tested by the data collected from the ports of Hong Kong and Kaohsiung. The results show that this model can be used to explain the transshipment competition relationship between the ports of Hong Kong and Kaohsiung well. A sensitivity analysis was also executed. The sensitivity analysis results showed that both the port of Hong Kong and Kaohsiung should decrease the charges of port and increase the effi- ciency of loading and discharging. Based on the sensitivity analysis results, some interesting conclusions and helpful suggestions were obtained for the managers of the ports of Hong Kong and Kaohsiung to improve their port management.