In order to evaluate the feasibility of safe mining close to the contact zone under reduced security coal pillar conditions at a coal mine in eastern China, the interaction mechanism of the interface between deep buri...In order to evaluate the feasibility of safe mining close to the contact zone under reduced security coal pillar conditions at a coal mine in eastern China, the interaction mechanism of the interface between deep buried sand and a paleo-weathered rock mass was investigated in the laboratory by direct shear testing. A DRS-1 high pressure soil shear testing machine and orthogonal design method were used in the direct shear tests. Variance and range methods were applied to analyze the sensitivity of each factor that has an influence on the mechanical characters of the interface. The test results show that the normal pressure is the main influencing factor for mechanical characteristics of the interface, while the lithological characters and roughness are minor factors; the shear stress against shear displacement curve for the interface shows an overall hyperbola relationship, no obvious peak stress and dilatancy was observed.When the normal pressure is 6 MPa, the shear strengths of interfaces with different roughness are basically the same, and when the normal pressure is more than 8 MPa, the larger the roughness of the interface, the larger will be the shear strength; the shear strength has a better linear relationship with the normal pressure, which can be described by a linear Mohr–Coulomb criterion.展开更多
Here we present six key parameters that have been applied to evaluate the Silurian Longmaxi shale gas accumulations of southern Sichuan Province.These parameters include richness of organic matter,single layer shale t...Here we present six key parameters that have been applied to evaluate the Silurian Longmaxi shale gas accumulations of southern Sichuan Province.These parameters include richness of organic matter,single layer shale thickness,burial depth of the shale,maturity,shale properties,and brittle mineral content.In combination with drilling data,the lower limits of these six parameters for marine shale gas have been evaluated and the following conclusions are drawn:(1)Organic carbon recovery, gas content inversion,and production tests have been applied for the first time to measure the lower limit of TOC,which is determined to be 1.0%.(2)Based on the hydrocarbon generation and expulsion theory for source rocks and the characteristics of Longmaxi shale,the lower limit of the single-layer thickness is estimated to be 30 m,of which a thickness of at least 15 m should contain high-quality shale.(3)Based on the correlation of TOC and porosity,the lower limit of gas-filled porosity is 1.2%.(4)Other parameters,such as maturity,burial depth,and brittle mineral content have also been studied with regard to the geologic conditions of southern Sichuan.Based on the study results,an evaluation index system has been established for highly evolved marine shale gas,and the system has been applied successfully to geologically screened shale gas occurrences in southern Sichuan Province.展开更多
基金the National Natural Science Foundation of China(Nos.41172290 and40572160)
文摘In order to evaluate the feasibility of safe mining close to the contact zone under reduced security coal pillar conditions at a coal mine in eastern China, the interaction mechanism of the interface between deep buried sand and a paleo-weathered rock mass was investigated in the laboratory by direct shear testing. A DRS-1 high pressure soil shear testing machine and orthogonal design method were used in the direct shear tests. Variance and range methods were applied to analyze the sensitivity of each factor that has an influence on the mechanical characters of the interface. The test results show that the normal pressure is the main influencing factor for mechanical characteristics of the interface, while the lithological characters and roughness are minor factors; the shear stress against shear displacement curve for the interface shows an overall hyperbola relationship, no obvious peak stress and dilatancy was observed.When the normal pressure is 6 MPa, the shear strengths of interfaces with different roughness are basically the same, and when the normal pressure is more than 8 MPa, the larger the roughness of the interface, the larger will be the shear strength; the shear strength has a better linear relationship with the normal pressure, which can be described by a linear Mohr–Coulomb criterion.
基金supported by National Science Foundation for Distinguished Young Scholars of China(Grant No.51125019)
文摘Here we present six key parameters that have been applied to evaluate the Silurian Longmaxi shale gas accumulations of southern Sichuan Province.These parameters include richness of organic matter,single layer shale thickness,burial depth of the shale,maturity,shale properties,and brittle mineral content.In combination with drilling data,the lower limits of these six parameters for marine shale gas have been evaluated and the following conclusions are drawn:(1)Organic carbon recovery, gas content inversion,and production tests have been applied for the first time to measure the lower limit of TOC,which is determined to be 1.0%.(2)Based on the hydrocarbon generation and expulsion theory for source rocks and the characteristics of Longmaxi shale,the lower limit of the single-layer thickness is estimated to be 30 m,of which a thickness of at least 15 m should contain high-quality shale.(3)Based on the correlation of TOC and porosity,the lower limit of gas-filled porosity is 1.2%.(4)Other parameters,such as maturity,burial depth,and brittle mineral content have also been studied with regard to the geologic conditions of southern Sichuan.Based on the study results,an evaluation index system has been established for highly evolved marine shale gas,and the system has been applied successfully to geologically screened shale gas occurrences in southern Sichuan Province.
