骤发干旱前期气象驱动条件及可模拟性分析

骤发干旱(简称骤旱)是一种以短历时、高强度、快速度为特征的极端事件,其形成速度已超出现有干旱监测工具的能力范围,监测模拟难度大。基于欧洲中心再分析产品(ERA)土壤含水量数据,构建考虑旱情开始速度的骤旱识别方法,提取中国1979—2018年骤旱事件,剖析旱情初期气象要素异常值的变化规律,探讨利用气象条件模拟骤旱的可行性。结果表明:①开始速度在空间上呈现显著的南北差异,长江以南地区较快,西北地区较慢;②骤旱比缓慢干旱具有更强的气象驱动力,骤旱各气象要素异常值的均值、峰值及变化幅度比缓慢干旱变化更为显著,尤其是峰值,约超过缓慢干旱0.5个标准差;③综合考虑骤旱爆发前后不同时段多个气象要素异常,能够较好地模拟开始速度,可用于监测与模拟骤旱。

无双线性对的基于身份的在线/离线门限签名方案

为了减少公钥密码体制中证书管理带来的开销和提高在线/离线门限签名方案的性能,利用分布式密钥生成协议和可验证秘密共享协议,提出了一种基于身份的在线/离线门限签名方案,并在离散对数假设下证明了新方案满足顽健性和不可伪造性。分析结果表明,新方案避免了传统公钥证书的管理问题和复杂的双线性对运算,大大降低了离线门限签名算法和签名验证算法的计算复杂度,在效率上优于已有的在线/离线门限签名方案。

基于双线性映射的门限短签名方案

提出了一种基于双线性映射的可证明安全的门限短签名体制,该方案可以容忍任意t-1<n/3个成员被恶意敌手破坏,并且签名密钥可以由参与者交互协商来生成,不需要可信中心来分发密钥。由于使用了双线性映射,所以该方案具有简单以及签名长度短等良好性质。最后证明了该方案在随机预言模型下对适应性选择明文攻击是存在性不可伪造的。

Visualization and simulation of plastic material flow in friction stir welding of 2024 aluminium alloy plates

Thin copper sheets as marker material were embedded into weld path of 2024 aluminium alloy plates and their final position after friction stir welding was examined by metallographic techniques. Referring to the visualized material flow patterns, a three-dimensional model was developed to conduct the numerical simulation of the temperature profile and plastic material flow in friction stir welding. The calculated velocity contour of plastic flow in close proximity of the tool is generally consistent with the visualized results. As the tool rotation speed increases at a constant tool travel speed, the material flow near the pin gets stronger. The predicted shape and size of the weld nugget zone match with the experimentally measured ones.

基于DIMINE软件的露天矿山爆破设计

根据矿山实测地形地貌现状图,利用DIMINE软件建立直观的三维地表模型,在模型上进行爆破设计。这种爆破设计较传统爆破设计而言,可视化效果更强,爆破过程可模拟,设计延时更精确。解决了传统爆破设计在可视化、模拟、分析与优化等方面的局限性问题,提高了爆破设计的安全性。

Visualization of Explosive Field

Aim To visualize the explosive field and design a useful and practicable software tool to analyze explosive field. Methods An ideal model of the explosive field with a protective wall, which was simulated by another program MMIC(multi material in cell), was brought forward. The physical data output by MMIC were changed into image data represented by DIB bitmaps through the following steps: normalizing, coding, mapping and displaying. The object oriented method was applied in programming. Results and Conclusion With the tool, the explosive field with a protective wall is visualized. The overview of explosive field and some details about the transmission of shock wave in the field, such as reflection, flow over an obstacle and Mach reflection, are shown.

Material driven workability simulation by FEM including 3D processing maps for magnesium alloy

The three-dimensional （3D） processing maps considering strain based on the two-dimensional （2D） processing maps proposed by PRASAD can describe the distribution of the efficiency of power dissipation and flow instability regions at various temperatures, strain rates and strains, which exhibit intrinsic workability related to material itself. Finite element （FE） simulation can obtain the distribution of strain, strain rate, temperature and die filling status, which indicates state-of-stress （SOS） workability decided by die shape and different processing conditions. On the basis of this, a new material driven analysis method for hot deformation was put forward by the combination of FE simulation with 3D processing maps, which can demonstrate material workability of the entire hot deformation process including SOS workability and intrinsic workability. The hot forging process for hard-to-work metal magnesium alloy was studied, and the 3D thermomechanical FE simulation including 3D processing maps of complex hot forging spur bevel gear was first conducted. The hot forging experiments were carried out. The results show that the new method is reasonable and suitable to determine the aoorooriate nrocess narameters.

基于无线信道的密钥生成机制

为了验证能在无线信道中生成密钥,利用信息论的知识对信道的保密容量和密钥速率进行了推理。为了保证生成密钥的安全性和秘密性,介绍了一种利用力学知识判别主动敌手能否攻击成功的方法,判断密钥协商是否可行;叙述了一种基于提取器的"私密增强"协议,增强协商密钥的秘密性。

HYBRID SCHEME FOR COMPRESSIBLE TURBULENT FLOW AROUND CURVED SURFACE BODY

A hybrid central-upwind scheme is proposed. Two sub-schemes, the central difference scheme and the Roets flux difference splitting scheme, are hybridized by means of a binary sensor function. In order to examine the capability of the proposed hybrid scheme in computing compressible turbulent flow around a curved surface body, especially the flow involving shock wave, three typical eases are investigated by using detached-eddy simulation technique. Numerical results show good agreements with the experimental measurements. The present hybrid scheme can be applied to simulating the compressible flow around a curved surface body involving shock wave and turbulence.

1-D Controlled source electromagnetic forward modeling for marine gas hydrates studies

We discuss the feasibility of using controlled-source electromagnetic （CSEM） in the frequency domain for prospecting marine gas hydrates. Based on the Ocean Drilling Program （ODP） Leg 164 log data, we have established several 1-D resistivity models which have different gas hydrate concentrations. Meanwhile, we analyzed the electromagnetic response of marine gas hydrates in the frequency domain based on these models. We also studied the relationship between electrical field magnitude or phase and parameters such as receiver-transmitter distance and frequency. Our numerical modeling results provide us with a quantitative reference for exploration and resource evaluation of marine gas hydrates.

Automatic target tracking on multi-resolution terrain

We propose a high-performance path planning algorithm for automatic target tracking in the applications of real-time simulation and visualization of large-scale terrain datasets, with a large number of moving objects （such as vehicles） tracking multiple moving targets. By using a modified Dijkstra＇s algorithm, an optimal path between each vehicle-target pair over a weighted grid-presented terrain is computed and updated to eliminate the problem of local minima and losing of tracking. Then, a dynamic path re-planning strategy using multi-resolution representation of a dynamic updating region is proposed to achieve high-performance by trading-off precision for efficiency, while guaranteeing accuracy. Primary experimental results showed that our algorithm successfully achieved l0 to 96 frames per second interactive path-replanning rates during a terrain simulation scenario with 10 to 100 vehicles and multiple moving targets.

Visual Dynamic Simulation and Optimization of Zhangjiuhe Diversion Project

With the aim of visualizing the real-time simulation calculation of water delivery system (WDS), a structural drawing-oriented (SDO) simulation technique was presented, and applied to Zhangjiuhe Diversion Project, which is a long-distance water delivery system constructed for draw- ing water from the Zhangjiuhe River to Kunming city. Taking SIMULINK software as simulating plat-form, the technique established a visual dynamic simulation model for the system. The simulation procedure of the system was simplified,and the efficiency of modeling was also enhanced according to the modularization and reutilization of the simulation program. Furthermore, a self-optimization model was presented. Based on the digital simulation models, the on line controlled optimization link was added, and the input data can be continually optimized according to the feedback information of simulating output. The system was thus optimized automatically. Built upon MATLAB software, simulation optimization of the Zhangjiuhe Diversion Project was achieved, which provides a new way for the research of optimal operation of WDS.

Simulation and visualization of the displacement between CO2 and formation fluids at pore-scale levels and its application to the recovery of shale gas

This article reports recent developments and advances in the simulation of the CO2-formation fluid displacement behaviour at the pore scale of subsurface porous media. Roughly, there are three effective visualization approaches to detect and observe the CO2-formation fluid displacement mechanism at the micro-scale, namely, magnetic resonance imaging, X-ray computed tomography and fabricated micromodels, but they are not capable of investigating the dis- placement process at the nano-scale. Though a lab-on-chip approach for the direct visualization of the fluid flow behaviour in nanoscale channels has been developed using an advanced epi-fluorescence microscopy method combined with a nanofluidic chip, it is still a qualitative analysis method. The lattice Boltzmann method （LBM） can simulate the CO2 displacement processes in a two-dimensional or three-dimensional （3D） pore structure, but until now, the CO2 displace- ment mechanisms had not been thoroughly investigated and the 3D pore structure of real rock had not been directly taken into account in the simulation of the CO2 displacement process. The status of research on the applications of CO2 displacement to enhance shale gas recovery is also analyzed in this paper. The coupling of molecular dynamics and LBM in tandem is proposed to simulate the CO2-shale gas displacement process based on the 3D digital model of shale obtained from focused ion beams and scanning electron microscopy.

Application of 3D Visual Techniques in Daliuta Coal Mine

3D visualization is one of major problems in “Digital Mine” theory and its technological research field. Through the observation of 3D geological models, spatial structural information, connected with the information of production management hidden in geological data, could be detected. In order to meet the requirement of more efficient coal exploration, a case study of geological characters of the Daliuta Coal Mine is presented in which 3D visual models of the ground surface and geologic bodies are established on the basis of data models and data structures of 3D geology modeling. The main conclusions of this study are as follows: (1) Through analysis and organization of spatial discrete data, the drillhole database is designed with the data of the Daliuta mine; the connections amomg drillhole data are real- ized and displayed in a 3D environment. (2) Combining real data of the Daliuta mine, drillhole visualization is realized in a 3D environment by using the CoalMiner system. (3) The ground surface modeling of the Daliuta coal mine adopted a surface-data model and a TIN data structure. (4) 3D models of coal seams and rock formations of the Daliuta mine are established, which provide a method for the simulation of complex surfaces of geologic bodies. In the end, the models are applied to the Daliuta coal mine and the result shows that better geological effects are obtained.

A Dormant Multi-Controller Model for Software Defined Networking

In order to improve the scalability and reliability of Software Defined Networking(SDN),many studies use multiple controllers to constitute logically centralized control plane to provide load balancing and fail over.In this paper,we develop a flexible dormant multi-controller model based on the centralized multi-controller architecture.The dormant multi-controller model allows part of controllers to enter the dormant state under light traffic condition for saving system cost.Meanwhile,through queueing analysis,various performance measures of the system can be obtained.Moreover,we analyze the real traffic of China Education Network and use the results as the parameters of computer simulation and verify the effects of parameters on the system characteristics.Finally,a total expected cost function is established,and genetic algorithm is employed to find the optimal values of various parameters to minimize system cost for the deployment decision making.

Stability and reliability of pit slopes in surface mining combined with underground mining in Tonglushan mine

Slope stability is of critical importance in the process of surface-underground mining combination. The influence of underground mining on pit slope stability was mainly discussed, and the self-stabilization of underground stopes was also studied. The random finite element method was used to analyze the probability of the rock mass stability degree of both pit slopes and underground stopes. Meanwhile, 3D elasto-plastic finite element method was used to research into the stress, strain and rock mass failure resulting from mining. The results of numerical simulation indicate that the mining of the underground test stope has certain influence on the stability of the pit slope, but the influence is not great. The safety factor of pit slope is decreased by 0.06, and the failure probability of the pit slope is increased by 1.84%. In addition, the strata yielding zone exists around the underground test stope. The results basically conform to the information coming from the field monitoring.

Effect of Simulated N Deposition on Soil Exchangeable Cations in Three Forest Types of Subtropical China

The effects of simulated nitrogen(N)deposition on soil exchangeable cations were studied in three forest types of subtropical China.Four N treatments with three replications were designed for the monsoon evergreen broadleaf forest (mature forest):control(0 kg N ha-1 year-1),low N(50 kg N ha-1 year-1),medium N(100 kg N ha-1 year-1)and high N(150 kg N ha-1 year-1),and only three treatments(i.e.,control,low N,medium N)were established for the pine and mixed forests.Nitrogen had been applied continuously for 26 months before the measurement.The mature forest responded more rapidly and intensively to N additions than the pine and mixed forests,and exhibited some significant negative symptoms,e.g.,soil acidification,Al mobilization and leaching of base cations from soil.The pine and mixed forests responded slowly to N additions and exhibited no significant response of soil cations.Response of soil exchangeable cations to N deposition varied in the forests of subtropical China,depending on soil N status and land-use history.

Heavy metal pollution model of tailings and the pollution simulation by visualization

Based on the analysis of whole mining process in metal mines, it was pointed out that the investigation of the heavy metal pollution of tailings should be taken as an important project for a metal mine. Combined with the anlysis of the characteristics of tailings, it is found that the transformation of the heavy metal dissolution process, the heavy metal ions migration with groundwater and the heavy metal transport in porous media are three key aspects. Accordingly, the models of heavy metal pollution were established with providing boundary conditions. Depending upon a case of Ibnglushan Copper Mine railings and its relevant area from Google maps＇, a three-dimensional grid view of the tailings was set up. By application of Fluent software, the contaminated process of the heavy metal pollutants in the tailings was shown through digital visualization pattern.

CFD Simulation of Fixed and Variable Pitch Vertical Axis Tidal Turbine

In this paper, hydrodynamic analysis of vertical axis tidal turbine （both fixed pitch ＆ variable pitch） is numerically analyzed. Two-dimensional numerical modeling ＆ simulation of the unsteady flow through the blades of the turbine is performed using ANSYS CFX, hereafter CFX, which is based on a Reynolds-Averaged Navier-Stokes （RANS） model. A transient simulation is done for fixed pitch and variable pitch vertical axis tidal turbine using a Shear Stress Transport turbulence （SST） scheme. Main hydrodynamic parameters like torque T, combined moment CM, coefficients of performance Cp and coefficient of torque Cr, etc. are investigated. The modeling and meshing of turbine rotor is performed in ICEM-CFD. Moreover, the difference in meshing schemes between fixed pitch and variable pitch is also mentioned. Mesh motion option is employed for variable pitch turbine. This article is one part of the ongoing research on tm＇bine design and developments. The numerical simulation results are validated with well reputed analytical results performed by Edinburgh Design Ltd. The article concludes with a parametric study of turbine performance, comparison between fixed and variable pitch operation for a four-bladed turbine. It is found that for variable pitch we get maximum Ce and peak power at smaller revolution per minute N and tip sped ratio 2.

Simulation analysis of construction process of high rock slope's stabilization

A self-developed elasto-plastic finite element program was used to analyze the construction sequence of high rock slope's stabilization in a coal-coking plant, and the result was compared with that employing the ultimate equilibrium method. Based on the results of finite element analysis, the stress contour graphs and displacement vector graphs at different construction steps were obtained, and the behavior of the slope during stabilization construction process was analyzed quantitatively. Based on the analysis of safety factors of three different schemes of stabilization and two different construction schemes, the assessment of stability and bracing design of the construction process were performed. The results show that the original reinforcement design is improper; the stability of the rock slope is controlled by a developed structural plane, the stability factor after excavation is less than 1, and the free surface should be braced in time; for stability, the construction sequence should adopt that bracing follows excavation step by step up to down; the local slide occurred during the construction process agrees with the dangerous slide determined by the numerical analysis, which proves the validity and rationality of the adopted method.