Adsorption of diehtyl dithiophosphate on chalcopyrite has been studied using UV-visible spectroscopy at pH values of 4, 6, and 9. It was found that the adsorption of diethyl dithiophosphate decreased with the increasi...Adsorption of diehtyl dithiophosphate on chalcopyrite has been studied using UV-visible spectroscopy at pH values of 4, 6, and 9. It was found that the adsorption of diethyl dithiophosphate decreased with the increasing pH treatments. The inhibition of diethyl dithiophosphate adsorption was found prominent in higher pH as a result of metal hydroxide species formation onto chalcopyrite surface. First order kinetic has been proposed and represented the adsorption mechanism. Flotation test using Hallimond tube has also been conducted and the results were consistent with the proposed mechanism. Furthermore, the morphological changes of the treated chalcopyrite were observed using Atomic Force Microscopy （AFM） showing the propensity of growth of islands, the new surfaces as products of the reaction. The hydrophobicity was measured in the form of force of adhesion. The results resembled with the approached mechanism.展开更多
Zinc oxide is recently being used as a magnetic semiconductor with the introduction of mag-netic elements.In this work,we report phase pure synthesis of Mg and Ni co-substituted ZnO to explore its structure,optical,ma...Zinc oxide is recently being used as a magnetic semiconductor with the introduction of mag-netic elements.In this work,we report phase pure synthesis of Mg and Ni co-substituted ZnO to explore its structure,optical,magnetic and photo-catalytic properties.X-ray di raction analysis reveals the hexagonal wurtzite type structure having P63mc space group without any impurity phase.UV-Vis spectrophotometry demonstrates the variation in bandgap with the addition of Mg and Ni content in ZnO matrix.Magnetic measurements exhibit a clear boosted magnetization in Ni and Mg co-doped compositions with its stable value of bandgap corroborating the structural stability and magnetic tuning for its advanced applications in modern-day spintronic devices.Photo-catalytic measurements performed using methyl green degradation demonstrate an enhanced trend of activity in Mg and Ni co-doped compositions.展开更多
TiO2/bauxite-tailings （TiO2/BTs） composites were prepared via a chemical liquid deposition method and characterized by X-ray diffractometry （XRD）, scanning electronic microscopy （SEM） and N2 adsorption analysis....TiO2/bauxite-tailings （TiO2/BTs） composites were prepared via a chemical liquid deposition method and characterized by X-ray diffractometry （XRD）, scanning electronic microscopy （SEM） and N2 adsorption analysis. The photocatalytic performance of TiO2/BTs composites was evaluated with UV-Vis spectrophotometer following the changes of phenol concentration under different illumination time. Effects of the calcination temperature, the pH and the cycles on the photocatalytic activity of TiO2/BTs composites were investigated. The composites calcined at 500 and 600 ℃ exhibit the best photocatalytic performance, and the phenol degradation ratios reacting for 40 and 160 rain reach 35% and 78% respectively under the same conditions, higher than those of 29% and 76% of the Degussa P25（TiO2）. The ability of TiO2/BTs500 （BTs500 represents bauxite-tailings calcined at 500 ℃） composites to degrade phenol increases with decreasing pH.展开更多
文摘Adsorption of diehtyl dithiophosphate on chalcopyrite has been studied using UV-visible spectroscopy at pH values of 4, 6, and 9. It was found that the adsorption of diethyl dithiophosphate decreased with the increasing pH treatments. The inhibition of diethyl dithiophosphate adsorption was found prominent in higher pH as a result of metal hydroxide species formation onto chalcopyrite surface. First order kinetic has been proposed and represented the adsorption mechanism. Flotation test using Hallimond tube has also been conducted and the results were consistent with the proposed mechanism. Furthermore, the morphological changes of the treated chalcopyrite were observed using Atomic Force Microscopy （AFM） showing the propensity of growth of islands, the new surfaces as products of the reaction. The hydrophobicity was measured in the form of force of adhesion. The results resembled with the approached mechanism.
基金supported by the Deanship of Scienti c Research at King Saud University for funding under Research Group(No.RG1440-021).
文摘Zinc oxide is recently being used as a magnetic semiconductor with the introduction of mag-netic elements.In this work,we report phase pure synthesis of Mg and Ni co-substituted ZnO to explore its structure,optical,magnetic and photo-catalytic properties.X-ray di raction analysis reveals the hexagonal wurtzite type structure having P63mc space group without any impurity phase.UV-Vis spectrophotometry demonstrates the variation in bandgap with the addition of Mg and Ni content in ZnO matrix.Magnetic measurements exhibit a clear boosted magnetization in Ni and Mg co-doped compositions with its stable value of bandgap corroborating the structural stability and magnetic tuning for its advanced applications in modern-day spintronic devices.Photo-catalytic measurements performed using methyl green degradation demonstrate an enhanced trend of activity in Mg and Ni co-doped compositions.
基金Project(2005CB623701) supported by the National Key Basic Research Program of China
文摘TiO2/bauxite-tailings （TiO2/BTs） composites were prepared via a chemical liquid deposition method and characterized by X-ray diffractometry （XRD）, scanning electronic microscopy （SEM） and N2 adsorption analysis. The photocatalytic performance of TiO2/BTs composites was evaluated with UV-Vis spectrophotometer following the changes of phenol concentration under different illumination time. Effects of the calcination temperature, the pH and the cycles on the photocatalytic activity of TiO2/BTs composites were investigated. The composites calcined at 500 and 600 ℃ exhibit the best photocatalytic performance, and the phenol degradation ratios reacting for 40 and 160 rain reach 35% and 78% respectively under the same conditions, higher than those of 29% and 76% of the Degussa P25（TiO2）. The ability of TiO2/BTs500 （BTs500 represents bauxite-tailings calcined at 500 ℃） composites to degrade phenol increases with decreasing pH.
