This paper presents an SG-DBR with a monolithically integrated SOA fabricated using quantum-well intermixing （QWI） for the first time in China's Mainland. The wavelength tuning range covers 33nm and the output p...This paper presents an SG-DBR with a monolithically integrated SOA fabricated using quantum-well intermixing （QWI） for the first time in China's Mainland. The wavelength tuning range covers 33nm and the output power reaches 10mW with an SOA current of 50mA. The device can work at available channels with SMSR over 35dB.展开更多
A high sensitivity fiber Bragg grating pressure sensor by using mechanical amplifier is demonstrated. The measured pressure sensitivity is -1.80×10 -4 /MPa, which is about two orders of magnitude better than a si...A high sensitivity fiber Bragg grating pressure sensor by using mechanical amplifier is demonstrated. The measured pressure sensitivity is -1.80×10 -4 /MPa, which is about two orders of magnitude better than a simple monomode fiber with an in-fiber grating. The resolution of pressure measurement is 0.015 MPa based on interrogation using tunable fiber grating filter.展开更多
文摘基于TDOA的超声波测距模型认为距离为声波的速度与时间差之积,忽略了温度等因素对速度的影响,此外,系统计时的误差影响了时间差测量,导致测距精度不高.分析了基于TDOA原理的超声波测距系统误差的主要来源,建立模型,通过实验对温度、距离衰减及时间差测量进行补偿,利用超声波反射特性对障碍物进行测距,并利用多探头在一定程度上削弱了方向性带来的影响.实验结果表明:系统性能稳定,测距精度高,环境适应性更强.在超声波测距范围内,最大误差不超过4 cm.
基金the National Natural Science Foundation of China(Nos.90401025,60736036,60706009,60777021)the State Key Development Program for Basic Research of China(Nos.2006CB604901,2006CB604902)the National High Technology Research and Development Program of China(Nos.2006AA01Z256,2007AA03Z419,2007AA03Z417)~~
文摘This paper presents an SG-DBR with a monolithically integrated SOA fabricated using quantum-well intermixing （QWI） for the first time in China's Mainland. The wavelength tuning range covers 33nm and the output power reaches 10mW with an SOA current of 50mA. The device can work at available channels with SMSR over 35dB.
基金The National Natural Science Foundation of China
文摘A high sensitivity fiber Bragg grating pressure sensor by using mechanical amplifier is demonstrated. The measured pressure sensitivity is -1.80×10 -4 /MPa, which is about two orders of magnitude better than a simple monomode fiber with an in-fiber grating. The resolution of pressure measurement is 0.015 MPa based on interrogation using tunable fiber grating filter.
