风力机翼型后缘射流及功率载荷影响分析

通过数值计算方法,对风力机翼型DU91-W2-250建立有限元模型,采用适合翼型仿真的SST k-ω湍流模型,研究原始翼型与添加后缘射流口翼型,得到不同攻角、不同射流速度下的升力系数、阻力系数并分析了其流场,最后通过动量-叶素理论计算射流翼型对功率和载荷的影响。结果表明:在0°~8°攻角范围内,升力系数和阻力系数上升呈现线性,升阻比保持不变,大于8°攻角阻力系数上升明显,射流不能改善翼型气动特性。添加射流翼型在8°攻角范围内可以增加翼型单位功率,但增加了叶片的载荷。

Numerical investigation on the flow and power of small-sized multi-bladed straight Darrieus wind turbine

Straight Darrieus wind turbine has attractive characteristics such as the ability to accept wind from random direction and easy installation and maintenance. But its aerodynamic performance is very complicated,especially for the existence of dynamic stall. How to get better aerodynamic performance arouses lots of interests in the design procedure of a straight Darrieus wind turbine. In this paper,mainly the effects of number of blades and tip speed ratio are discussed. Based on the numerical investigation,an assumed asymmetric straight Darrieus wind turbine is proposed to improve the averaged power coefficient. As to the numerical method,the flow around the turbine is simulated by solving the 2D unsteady Navier-Stokes equation combined with continuous equation. The time marching method on a body-fitted coordinate system based on MAC (Marker-and-Cell) method is used. O-type grid is generated for the whole calculation domain. The characteristics of tangential and normal force are discussed related with dynamic stall of the blade. Averaged power coefficient per period of rotating is calculated to evaluate the eligibility of the turbine.

Performance Analysis of a Vertical Axis Tidal Turbine With Flexible Blades

In this study, a vertical axis tidal turbine with flexible blades is investigated. The focus is on analyzing the effect of flexible airfoils types and blade flexibility on turbine net output power. To this end, five different flexible airfoils （Symmetric and Non-symmetric） are employed. The results show that the use of a thick flexible symmetric airfoil can effectively increase output power compared to that achievable with a conventional rigid blade. Moreover, the use of highly flexible blades, as opposed to less flexible or rigid blades, is not recommended.

Effect of blade pitch angle on aerodynamic performance of straight-bladed vertical axis wind turbine

Wind energy is one of the most promising renewable energy sources, straight-bladed vertical axis wind turbine(S-VAWT) appears to be particularly promising for the shortage of fossil fuel reserves owing to its distinct advantages, but suffers from poor self-starting and low power coefficient. Variable-pitch method was recognized as an attractive solution to performance improvement, thus majority efforts had been devoted into blade pitch angle effect on aerodynamic performance. Taken into account the local flow field of S-VAWT, mathematical model was built to analyze the relationship between power outputs and pitch angle. Numerical simulations on static and dynamic performances of blade were carried out and optimized pitch angle along the rotor were presented. Comparative analyses of fixed pitch and variable-pitch S-VAWT were conducted, and a considerable improvement of the performance was obtained by the optimized blade pitch angle, in particular, a relative increase of the power coefficient by more than 19.3%. It is further demonstrated that the self-starting is greatly improved with the optimized blade pitch angle.

Blade pitch control of straight-bladed vertical axis wind turbine

Collective pitch control and individual pitch control algorithms were present for straight-bladed vertical axis wind turbine to improve the self-starting capacity.Comparative analysis of straight-bladed vertical axis wind turbine(SB-VAWT) with or without pitch control was conducted from the aspects of aerodynamic force,flow structure and power coefficient.The computational fluid dynamics(CFD) prediction results show a significant increase in power coefficient for SB-VAWT with pitch control.According to the aerodynamic forces and total torque coefficient obtained at various tip speed ratios(TSRs),the results indicate that the blade pitch method can increase the power output and decrease the deformation of blade;especially,the total torque coefficient of blade pitch control at TSR 1.5 is about 2.5 times larger than that of fixed pitch case.Furthermore,experiment was carried out to verify the feasibility of pitch control methods.The results show that the present collective pitch control and individual pitch control methods can improve the self-starting capacity of SB-VAWT,and the former is much better and its proper operating TSRs ranges from 0.4 to 0.6.

Airfoil effects on efficiency of 2 MW horizontal axis wind turbine blades

Optimization of airfoil characteristics such as lift and drag is essential for high efficiency wind turbine blade design. In this research, effects of airfoil lift and drag on blade power coefficients were investigated by using of wind turbine blade design software, PROPID. Firstly, a wind turbine blade of 2MW class was designed with DU-serics airfoils in the inner part and with aNACA series airfoil as a main airfoil in the outer part. Lift distribution was set to have near L/D maximum at each span station. Then, lift and drag curves were modified to observe effect of L/D variation. Drag and lift change with constant L/D on blade power coefficient was also studied for sensitivity investigation. Each case was optimized with Newtonian iteration incorporated in PROPID. High design lift coefficient results in less chord length and twist angle to maintain same aerodynamic load level. And, power coefficient wasn＇t improved much with high L/D. During the process, optimal inputs such as lift distribution, design lift and induction factors were suggested. As results, it was found that L/D maximization was important to obtain high efficiency. For the L/D maximization, lift maximization was important to minimize structural weight, but decreasing drag didn＇t affect the blade shape.