期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
镁/铝复合板热轧过程轧制力和厚度预测与分析
1
作者 苏军 郝平菊 +2 位作者 刘元铭 王振华 王涛 《中国有色金属学报》 EI CAS CSCD 北大核心 2024年第8期2627-2640,共14页
热轧镁/铝复合板各层厚度直接决定了它能否满足不同环境条件下的使用要求,因此,研究决定各层厚度的轧制力和厚度预测模型对轧制过程控制和产品的性能提升具有重要的意义。本文建立了AZ31B镁合金和5052铝合金在轧制过程中变形抗力的PSO-B... 热轧镁/铝复合板各层厚度直接决定了它能否满足不同环境条件下的使用要求,因此,研究决定各层厚度的轧制力和厚度预测模型对轧制过程控制和产品的性能提升具有重要的意义。本文建立了AZ31B镁合金和5052铝合金在轧制过程中变形抗力的PSO-BP预测模型,高精度地表征其在不同温度、应变和应变速率下的变形特性。结果表明:镁合金对应模型的的R2、RMSE和AARE分别为0.99165、3.4251和0.56%,铝合金对应模型的R2、RMSE和AARE分别为0.99496、2.8092和1.43%,验证了PSO-BP模型用于描述两种金属材料的准确性和可靠性。在镁/铝复合板轧制过程中,轧制力随着压下率和入口总厚度的增加而增大,随着入口厚比的减小,轧制力呈增大的趋势。镁/铝复合板出口厚比随着压下率和入口总厚度的增大而减小,随着入口厚比的减小,出口厚比也呈减小的趋势。 展开更多
关键词 镁/铝复合板 PSO-BP神经网络 变形抗力 轧制力 各层厚度
下载PDF
Magnetization and coercivity in Co/Pt multilayers with constant total Co layer thickness
2
作者 聂颖 杨鑫 +1 位作者 张鹏 桑海 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2010年第5期819-824,共6页
Co/Pt multilayers with perpendicular anisotropy were deposited using a dc magnetron sputtering system under high vacuum.Magnetization process was investigated by the measurement of magnetic components parallel and per... Co/Pt multilayers with perpendicular anisotropy were deposited using a dc magnetron sputtering system under high vacuum.Magnetization process was investigated by the measurement of magnetic components parallel and perpendicular to the applied field.A dependence of the coercivity of Co/Pt multilayers on the Co layer thickness was reported,in which the total thickness of Co layers kept constant.It is observed that the coercivity increases with the increment of Co layer thickness.For the samples with the same Co layer thickness while different total Co layer thickness,the coercivity first increases and then decreases with the increase of the total thickness of Co layers.This effect could be attributed to the competition between the reduction of HC related to incoherent reversal and the step-up of HC contributed by the magnetic polarization of Pt atoms at the interface of Co and Pt layers during magnetization reversal.The results show that the change of the coercivity is strongly related to the Co layer thickness,but not the total thickness of Co layers.The dependence of the coercivity on the angle between an applied field and the easy axis shows that the nucleation mode is dominant in magnetization reversal process of the samples. 展开更多
关键词 Co/Pt multilayers perpendicular magnetic anisotropy COERCIVITY
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部