尼龙勾毛搭扣带:软包装封合的全新体验

Velcro（维克罗）集团是全球勾毛搭扣带最早的生产商之一,也是这一行业的领导者。如今维克罗集团通过其分布在全球各地的分支机构,向世界各地的客户提供数百种不同系列的勾毛搭扣带和搭扣系统,服务于包装、个人护理、医药、汽车等众多细分领域。近期,美国高端宠物食品制造商Hill公司推出了一款由软包装自立袋包装的宠物食品,采用了维克罗集团提供的Press-LokTM尼龙勾毛搭扣带封合形式,这也是Hill公司的一项新尝试。

Damping properties and mechanism of aluminum matrix composites reinforced with glass cenospheres

The damping properties were improved by preparing Al matrix composites reinforced with glass cenospheres through the pressure infiltration method.Transmission electron microscopy and scanning electron microscopy were employed to characterize the microstructure of the composites.The low-frequency damping properties were examined by using a dynamic mechanical thermal analyzer,aiming at exploring the changing trend of damping capacity with strain,temperature,and frequency.The findings demonstrated that the damping value rose as temperature and strain increased,with a maximum value of 0.15.Additionally,the damping value decreased when the frequency increased.Dislocation damping under strain and interfacial damping under temperature served as the two primary damping mechanisms.The increase in the density of dislocation strong pinning points following heat treatment reduced the damping value,which was attributed to the heat treatment enhancement of the interfacial bonding force of the composites.

Damping properties of as-cast Mg-xLi-1Al alloys with different phase composition

Three kinds of different phases of Mg-xLi-1Al alloys with x=5 （full α LA51）, 9 （dual-phase LA91）, and 14 （rich-βLA141） were prepared by vacuum melting method. Their microstructure and damping capacities were investigated by optical microscopy, X-ray diffractometry, and dynamic mechanical analysis. The results show that the addition of Li changes the crystal structure of the alloys and causes new damping mechanisms to emerge. And the appearance of BCC structure makes the damping performance improved remarkably. The lower the elastic modulus is, the smaller the strain is and even the slower the acceleration is. The dual-phase alloy shows a better damping capacity while the temperature changes. Furthermore, all three alloys have two significant peaks：P1 caused by the movement of dislocations on the basal planes and P2 caused by the sliding of grain boundaries.

凉山彝族传统民间歌舞

本文以大量的原始材料为依据 ,对凉山彝族的传统民间歌曲和民间舞蹈 ,从理论上进行了初步的总结 ,对进一步从开发运用的角度 。

Finite element analysis of the free-damped beam-stiffened plate

A finite element model is presented for free-damped beam-stiffened plates. The nodes of the plate elements are treated as master-nodes, and the corresponding nodes of the beam elements are considered as slave-nodes. The stiffness and mass matrices of the elements are developed. Based on the analysis of the dynamic properties of the structures, modal loss factors are predicted by the modal strain energy method. Finally, an example is given to compare the results obtained from the proposed method with the results of the ANSYS software. The results show that the method in this paper is computationally efficient, simple and feasible with high precision and engineering practicability.

Effect of electropulsing on dislocation mobility of titanium sheet

To investigate the effect of the electropulsing on dislocation mobility,specimens cut from the cold-rolled titanium sheet were treated by high density electropulsing with the maximum current density of 7.22,7.64,7.96 kA/mm 2 ,pulse period 110μs.The internal friction and elastic modulus were measured by a dynamic mechanical analyzer（DMA）.When strain amplitude lowers a certain critical one,the damping of the electropulsed titanium sheet is lower than that of the cold-rolled one.When the strain amplitude exceeds the critical one,the damping of the electropulsed titanium sheet is extraordinarily higher than that of the cold-rolled or conventional annealed one.Furthermore,it is found that the damping peak of the electropulsed titanium sheet shifts to lower temperature compared with the conventional annealed one.It is demonstrated that the electropulsing treatment can decrease dislocation tangles and enhance dislocation mobility.

Analysis of Caffeoylquinic Acids in Sweetpotato by HPLC

[Objective] An HPLC method for the determination of caffeoylquinic acid compounds in sweet potato was developed in the present research. Quantitative analysis was performed on 11 sweet potato genotypes to provide a reference for the development and utilization of sweet potato, especial y on the aboveground part. [Method] Caffeoylquinic acid compounds were extracted from sweet potato leaves by ultrasonic treatment for 20 min with 200 volumes of methanol. The mobile phase of HPLC was acetonitrile -0.2% aqueous phosphoric acid. Chlorogenic acid, 4, 5-O-coffeocylquinic acid, 3, 5-O-coffeeacylquinic acid and 3, 4-O-coffeeacylquinic acid were separated wel by gradient elution, with recovery rate of 94.74%, 102.63%, 100.01% and 101.05%, respectively. [Result] The contents of caffeoylquinic acids were significantly different between sweet potato genotypes and tissue parts. Among these compounds, the content of bi-caffeoylquinic acids was the highest in the aboveground part, and the content of chlorogenic acid was the highest in the root tubers. The content of caffeoylquinic acid in different parts of the plant was： 9.77-40.86 mg/g in stem apex, 2.68-13.97 mg/g in mature leaves, 0.56-7.90 mg/g in stems and 0.69-4.33 mg/g in root tubers, respectively. [Conclusion] Sweet potato stems and leaves can be used for the extraction of chlorogenic acid in development and utilization, in which the purple sweet potato series is superior to the non-purple sweet potato series. The performance of the two purple sweet potato materials of 11ZY series is particularly prominent.

南亚交往撷英(九)

九、山重水复2010年5月,随着制宪会议两年任期即将届满,各方仍未就新宪法达成一致,尼泊尔宪政面临危机。5月28日,尼共（联）、大会党和联合尼共（毛）达成一揽子协议,将制宪会议延期一年。6月30日,尼帕尔宣布辞职,改任看守政府总理。2011年2月6日,尼共（联）主席卡纳尔在联合尼共（毛）及部分小党支持下当选总理,

Damping capacity of BaTiO_3/Al composites fabricated by hot extrusion

To develop new type of high damping metal matrix composites, large grain size barium titanate （BaTiO3） ceramic was sintered and added into Al powder to fabricate BaTiO3/Al composites through the powder metallurgy method and hot extrusion. The damping properties of BaTiO3 ceramic, Al matrix and BaTiO3/Al composites were examined by dynamic mechanical analysis in the temperature range from 273 K to 573 K. The results show that although BaTiO3 exhibits high damping （tan δ=0.12） below 400 K, the damping capacity of 10%BaTiO3/Al （mass fraction） composites below 400 K is not increased as compared to the Al matrix. On the other hand, the damping capacity above 450 K is greatly enhanced due to the motion of dislocations at the interfaces between ceramic particles and Al matrix. The failure of exerting the intrinsic damping of BaTiO3 particles in the composites is attributed to the poor interface bonding between the particles and the matrix. The tensile strength of the composite is 42% higher than that of the Al matrix, which indicates the possibility of obtaining high strength and high damping composites via interface improvement and the addition of high volume fraction of large grain BaTiO3 particles.

李学军看望慰问自治区新闻出版局住村工作组

2014年4月15日下午,自治区党委常委、宣传部部长李学军来到和田市肖尔巴格乡合尼村看望慰问自治区新闻出版局住村工作组的队员们,并了解他们的生活工作情况。李学军实地察看了住村工作组的生活环境,包括宿舍、厨房、厕所,并给工作组赠送了米、面、油、蔬菜等慰问品。在听取自治区新闻出版局副局长。

孤寡老人吃上热饭了

今年56岁的买买提·吐尔逊,是和田市肖尔巴格乡合尼村的孤寡老人,他住在合尼村村委会值班室,值班的同时还负责打扫院落卫生及做一些杂事。他个儿不高,话不多,但非常憨厚勤快,看到自治区新闻出版局住村工作组成员在劳动便主动帮忙。用合尼村党支书买合木提·艾合买提的话说:"买买提·吐尔逊的天是共产党、地是共产党。"意思是说他的亲人就是共产党。

自治区新闻出版局领导调研慰问住和田市肖尔巴格乡工作组

自治区新闻出版局住和田市肖尔巴格乡'访民情惠民生聚民心'工作组第一批20人,分别在肖尔巴格乡合尼村、尕宗村、阿克兰干村3个行政村开展工作。2014年3月19日至20日,自治区新闻出版局党组书记石永强、局长古力先·吐拉洪对工作组住村的整体情况进行了调研。

自治区新闻出版局慰问和田市定点帮扶点

【本刊讯】2011年古尔邦节来临前夕,自治区新闻出版局扶贫工作领导小组办公室委派局工会工作委员会主任朱根生,带着价值2.5万元的慰问品,前往定点帮扶的和田市肖尔巴格乡合尼村进行走访慰问。肖尔巴格乡全尼村位于和田市西郊。

Damping capacity of high strength-damping aluminum alloys prepared by rapid solidification and powder metallurgy process

Two kinds of high strength-damping aluminum alloys （LZ7） were fabricated by rapid solidification and powder metallurgy （RS-PM） process. One material was extruded to profile aluminum directly and the other was extruded to bar and then rolled to sheet. The damping capacity over a temperature range of 25-300 ℃was studied with damping mechanical thermal analyzer （DMTA） and the microstructures were investigated by optical microscopy （OM）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The experimental results show that the damping capacity increases with the test temperature elevating. Internal friction value of rolled sheet aluminum is up to 11.5×10^-2 and that of profile aluminum is as high as 6.0×10^-2 and 7.5×10^-2 at 300 ℃, respectively. Microstructure analysis shows the shape of precipitation phase of rolled alloy is more regular and the distribution is more homogeneous than that of profile alloy. Meanwhile, the interface between particulate and matrix of rolled sheet alloy is looser than that of profile alloy. Maybe the differences at interface can explain why damping capacity of rolled sheet alloy is higher than that of profile alloys at high temperature （above 120 ℃）.

Depression in patients with irritable bowel syndrome in Jos,Nigeria

AIM: To study the brain-gut interaction and the effect of behavioral or psychiatric conditions on irritable bowel syndrome (IBS) in an African population. METHODS: IBS was diagnosed using the Rome Ⅱ diagnostic criteria. The entry of each patient was confirmed following detailed explanations of the questions. Four hundred and eighteen patients were studied. Subjects satisfying the Rome Ⅱ criteria for IBS were physically examined and stool microscopy was done to identify the presence of “alarm factors”. Depression was diagnosed using the symptom-check list adapted from the Research Diagnostic Criteria (DSM-Ⅳ) of the American Psychiatric Association. RESULTS: Seventy-five (56.8%) of the 132 IBS patients were depressed whereas only 54 (20.1%) of the 268 non-IBS patients were depressed. There was a significant relationship between IBS and depression (χ2 = 54.29, Odds ratio = 5.21, 56.8 ± 8.4 vs 20.1 ± 5.2, P = 0.001). Even though constipation predominant IBS patients were more likely to be depressed, no significant relationship was found between the subtype of IBS and depression (χ2 = 0.02, OR = 0.95, P = 0.68). CONCLUSION: IBS is significantly associated with major depression but not gender and bowel subtypes of the patients. Patients with IBS need to be evaluated for depression due to the highly significant relationship between the two conditions.

Quantum fluctuations of mesoscopic damped mutual capacitance coupled double resonance RLC circuit in thermal excitation state

Mesoscopic damped mutual capacitance coupled double resonance circuit is quantized by the method of damped harmonic oscillator quantization. Hamiltonian is diagonalized by the method of unitary transformation. The energy spectra of this circuit are given. The quantum fluctuations of the charge and current of each loop are investigated by the method of thermo- field dynamics (TFD) in thermal excitation state,thermal squeezed vacuum state, thermal vacuum state and vacuum state. It is shown that the quantum fluctuations of the charge and current are related to not only circuit inherent parameter and coupled magnitude, but also quantum number of excitation, squeezed coefficients, squeezed angle and environmental temperature. And the quantum fluctuations increase with the increase of temperature and decay with time.

Larval and Juvenile Growth Performance of Manila Clam Hybrids of Two Full-Sib Families

In order to determine whether growth performance could be improved by hybridizing full-sib families of Manila clam （Ruditapes philippinarum）, crosses between two full-sib families including self and reciprocal crosses were carried out. The effects of heterosis, combining ability and interaction on the growth of shell length were estimated. The results showed that the growth of hybrid larvae was intermediate between parents on days 6 and 9. Heterosis on shell length was observed, which varied at juvenile stage. The cross of ♂A×♀B （Hp varied between 10.41% and 68.27%） displayed larger heterosis than ♂A×♀B （Hp varied between 1.89% and 32.33%） did, suggesting that ♂A×♀B was an ideal hatchery method of improving the growth performance of Manila clam. The variances of general combining ability （GCA）, special combining ability （SCA） and interaction （I） were significant in shell length （P〈 0.05）, indicating that both additive and non-additive genetic factors were important contributors to the growth of larvae and juveniles. The GCA for shell length of ♂A×♀B was higher than that of ♂A×♀B at both larval and juvenile stages. This con- firmed that the cross between ♂A and ♀B showed great growth in shell length. In summary, the growth of Manila clam seeds could be improved by hybridizing selected parents from large numbers of full-sib families.

High damping capacities of Mg-Cu based alloys

The dynamic mechanical analyzer(DMA)was applied to investigate the damping properties of Mg-Cu based alloys.The results show that the as-cast hypoeutectic Mg-Cu binary alloys exhibit ultra-high damping capacities,while the eutectic Mg-Cu alloy exhibits low damping capacity.The strain amplitude dependent damping performance reveals that the dislocation damping mainly dominates in Mg-Cu alloys.Furthermore,the influence of eutectic phase on damping mechanisms of Mg-Cu binary alloys was discussed in detail and the effect of Si addition on the damping of Mg-1%Cu based alloy was also reported.Two damping peaks are observed on the temperature dependent spectrum of Mg-Cu based alloys.One is located at room temperature,which is dislocation related peak;and the other is located at moderate temperature,which is caused by the grain boundary sliding.

A Novel TiNi/AlSi Composite with High Strength and High Damping Capacity

A novel TiNi/AlSi composite with high compressive strength and high damping capacity was obtained by infiltrating Al-12%Si alloy into porous TiNi alloy.It had been found that the high compressive strength (440 MPa) of TiNi/AlSi composite is due to the increase of effective carrying area after infiltrating Al-12%Si alloy,while the high damping capacity is contributed to TiNi carcass,Al-12%Si filling material and micro- slipping at the interface.