[Objective] The experiment aimed to study the relation between yield components and yield per plant of double-low hybrid rapeseed and provide reference for breaking yield limitation of rapeseed and culturing new doubl...[Objective] The experiment aimed to study the relation between yield components and yield per plant of double-low hybrid rapeseed and provide reference for breaking yield limitation of rapeseed and culturing new double-low hybrid rapeseed variety. [Method]The yield components and yield per plant of two cross combination of double-low hybrid rapeseed (B02, D04) and Shuza 6 were correlatively analyzed and compared, besides, the path analysis was also carried on to them. [Result] Among B02, D04 and Shuza No.6, effective pod number per plant and seeds per silique, seeds per pod and 1 000-grain weight were all negative correlation. In high yield hybrid, pod number per plant, seeds per pod had more impaction on yield per plant than 1 000-grain weight and the difference was at 0.01 significant level. In the control variety Shuza No.6, the impactions of pod number per plant and seeds per pod on yield per plant were bigger than that of 1 000-grain weight on yield per plant, however, the difference was not significant. [Conclusion] The improvement of effective pod number per plant was an important aim of breeding work of double low rapeseed breeding in Sichuan ecological region.展开更多
Perfluorolyether is characterized by highly chemical inertness, oxidative stability, anticorrosion as well as radiation resistance. It can be used as lubricant especially in harsh environmental conditions. In this wor...Perfluorolyether is characterized by highly chemical inertness, oxidative stability, anticorrosion as well as radiation resistance. It can be used as lubricant especially in harsh environmental conditions. In this work, hexafluoropylene oxide was catalytically polymerized at low temperature using the methods of anionic polymerization, and perfluorolyethers were obtained with number-average degree of polymerization more than 15. CsF and RbF were used as catalysts and their catalytic activities were investigated. Experimental results show that perfluorolyethers with number-average molar masses up to 3 000 g/mol could be obtained using the two kinds of catalysts, respectively. As compared to CsF, the number-average degree of polymerization is higher and the relative molecular mass distribution interval is narrower when RbF is used as catalyst. The effect of factors such as impurities＇ content, reaction temperature and reaction time on the number-average degree of polymerization was also investigated. It is found that low impurities＇ content and low temperature are beneficial to the generation of high number-average degree of perfluorolyethers. The optimization reaction time is 24 h, and fiarther increase of reaction time does not significantly affect the average relative molecular mass. The product was characterized by IR, 19F NMR and GC-MS, and the catalytic mechanism was analyzed finally.展开更多
In this paper, four kinds of polymethacrylates(PMAs) used as multifunctional additives were synthesized from quaternary C1—C14 methacrylate, among which sample 4 exhibited relatively better performance. According to ...In this paper, four kinds of polymethacrylates(PMAs) used as multifunctional additives were synthesized from quaternary C1—C14 methacrylate, among which sample 4 exhibited relatively better performance. According to the methacrylate ratio of sample 4, the optimized reaction conditions of PMA were explored by orthogonal experiments comprising 4 factors and 3 levels, and the optimized reaction conditions covered an initiator dosage of 0.8 %, a molecular weight regulator dosage of 0.4%, a reaction temperature of 95 ℃ and a reaction time of 8.5 h. When the optimized PMA samples were used to formulate the 75W/90 automotive gear base oil, they exhibited improved shear stability and good low temperature property. In comparison with foreign commercial polymethacrylate GP, the optimized PMA samples exhibited better thickening ability, similar shear stability and slightly weak low temperature property, with their performance being the same as GP's on the whole. The slight difference in the performance between the optimized PMA and GP was attributed to the difference of chain length of copolymers and the distribution of relative molecular mass between them.展开更多
A series of novel copolymers were successfully synthesized by ring-opening polymerization （ROP） of 3 （S）-methyl-morpholine-2,5-dione （MMD） and 5-methyl-5-benzyloxycarbonyl-1,3-dioxan-2-one （MBC） using stan- no...A series of novel copolymers were successfully synthesized by ring-opening polymerization （ROP） of 3 （S）-methyl-morpholine-2,5-dione （MMD） and 5-methyl-5-benzyloxycarbonyl-1,3-dioxan-2-one （MBC） using stan- nous octoate as catalyst. The copolymers were characterized by means of ~H-NMR and FT-IR spectroscopy. Gel permeation chromatography （GPC） test shows that the average-number relative molecular mass and average-weight rela- tive molecular mass slightly increase with the increase of MBC content in feed. The results of differential scanning calorimetry （DSC） demonstrate that the glass transition temperature of copolymers increases with the increase of MBC content in copolymers. The copolymers of MMD and MBC are amorphous copolymers, as indicated by DSC results, while the homopolymer of MMD is semicrystalline.展开更多
High-quality carbon nanotubes （CNTs） are promising materials in many applications. However, current chemical vapor deposition （CVD） methods for CNT synthesis suffer from the discrepancy between the quality and yie...High-quality carbon nanotubes （CNTs） are promising materials in many applications. However, current chemical vapor deposition （CVD） methods for CNT synthesis suffer from the discrepancy between the quality and yield of CNTs： Low-quality CNTs can be synthesized with high yield, while high-quality CNTs can only be synthesized with low yield. Here a CVD method has been designed to synthesize both high-quality and low-quality CNTs using the same combination of catalyst and precursor. As a result, we were able to understand the reasons for the low yield in high-quality CNT synthesis and a method was derived to improve their yield. This understanding is an important step towards high- yield synthesis of high-quality CNTs.展开更多
基金Supported by Key Germplasm Project of Sichuan Province during the Eleventh Five-year Plan(2006YZGG-23)~~
文摘[Objective] The experiment aimed to study the relation between yield components and yield per plant of double-low hybrid rapeseed and provide reference for breaking yield limitation of rapeseed and culturing new double-low hybrid rapeseed variety. [Method]The yield components and yield per plant of two cross combination of double-low hybrid rapeseed (B02, D04) and Shuza 6 were correlatively analyzed and compared, besides, the path analysis was also carried on to them. [Result] Among B02, D04 and Shuza No.6, effective pod number per plant and seeds per silique, seeds per pod and 1 000-grain weight were all negative correlation. In high yield hybrid, pod number per plant, seeds per pod had more impaction on yield per plant than 1 000-grain weight and the difference was at 0.01 significant level. In the control variety Shuza No.6, the impactions of pod number per plant and seeds per pod on yield per plant were bigger than that of 1 000-grain weight on yield per plant, however, the difference was not significant. [Conclusion] The improvement of effective pod number per plant was an important aim of breeding work of double low rapeseed breeding in Sichuan ecological region.
基金Project(53110704012) supported by the Fundamental Research Funds for the Central Universities,China
文摘Perfluorolyether is characterized by highly chemical inertness, oxidative stability, anticorrosion as well as radiation resistance. It can be used as lubricant especially in harsh environmental conditions. In this work, hexafluoropylene oxide was catalytically polymerized at low temperature using the methods of anionic polymerization, and perfluorolyethers were obtained with number-average degree of polymerization more than 15. CsF and RbF were used as catalysts and their catalytic activities were investigated. Experimental results show that perfluorolyethers with number-average molar masses up to 3 000 g/mol could be obtained using the two kinds of catalysts, respectively. As compared to CsF, the number-average degree of polymerization is higher and the relative molecular mass distribution interval is narrower when RbF is used as catalyst. The effect of factors such as impurities＇ content, reaction temperature and reaction time on the number-average degree of polymerization was also investigated. It is found that low impurities＇ content and low temperature are beneficial to the generation of high number-average degree of perfluorolyethers. The optimization reaction time is 24 h, and fiarther increase of reaction time does not significantly affect the average relative molecular mass. The product was characterized by IR, 19F NMR and GC-MS, and the catalytic mechanism was analyzed finally.
文摘In this paper, four kinds of polymethacrylates(PMAs) used as multifunctional additives were synthesized from quaternary C1—C14 methacrylate, among which sample 4 exhibited relatively better performance. According to the methacrylate ratio of sample 4, the optimized reaction conditions of PMA were explored by orthogonal experiments comprising 4 factors and 3 levels, and the optimized reaction conditions covered an initiator dosage of 0.8 %, a molecular weight regulator dosage of 0.4%, a reaction temperature of 95 ℃ and a reaction time of 8.5 h. When the optimized PMA samples were used to formulate the 75W/90 automotive gear base oil, they exhibited improved shear stability and good low temperature property. In comparison with foreign commercial polymethacrylate GP, the optimized PMA samples exhibited better thickening ability, similar shear stability and slightly weak low temperature property, with their performance being the same as GP's on the whole. The slight difference in the performance between the optimized PMA and GP was attributed to the difference of chain length of copolymers and the distribution of relative molecular mass between them.
基金Supported by Chinese Program for New Century Excellent Talents in University "NCET",Ministry of Education of P.R. China(No.2008DFA51170)
文摘A series of novel copolymers were successfully synthesized by ring-opening polymerization （ROP） of 3 （S）-methyl-morpholine-2,5-dione （MMD） and 5-methyl-5-benzyloxycarbonyl-1,3-dioxan-2-one （MBC） using stan- nous octoate as catalyst. The copolymers were characterized by means of ~H-NMR and FT-IR spectroscopy. Gel permeation chromatography （GPC） test shows that the average-number relative molecular mass and average-weight rela- tive molecular mass slightly increase with the increase of MBC content in feed. The results of differential scanning calorimetry （DSC） demonstrate that the glass transition temperature of copolymers increases with the increase of MBC content in copolymers. The copolymers of MMD and MBC are amorphous copolymers, as indicated by DSC results, while the homopolymer of MMD is semicrystalline.
文摘High-quality carbon nanotubes （CNTs） are promising materials in many applications. However, current chemical vapor deposition （CVD） methods for CNT synthesis suffer from the discrepancy between the quality and yield of CNTs： Low-quality CNTs can be synthesized with high yield, while high-quality CNTs can only be synthesized with low yield. Here a CVD method has been designed to synthesize both high-quality and low-quality CNTs using the same combination of catalyst and precursor. As a result, we were able to understand the reasons for the low yield in high-quality CNT synthesis and a method was derived to improve their yield. This understanding is an important step towards high- yield synthesis of high-quality CNTs.
