The effective stress method is developed to predict the axial capacity of piles in clay. The effective stress state changes due to the resulting pore pressure change and therefore, the strength and stiffness of the so...The effective stress method is developed to predict the axial capacity of piles in clay. The effective stress state changes due to the resulting pore pressure change and therefore, the strength and stiffness of the soil will change. In this work, the finite element method is utilized as a tool for the analysis of pile-soil systems in undrained condition. The computer program CRISP was developed to suit the problem requirements. CRISP uses the finite element technique and allows predictions to be made of ground deformation using critical state theories. Eight-node isoparametric element was added to the program in addition to the slip element. A pile loading problem was solved in which the pile-soil system is analyzed in undrained condition. The pile is modelled as elastic-plastic material, while the soil is assumed to follow the modified Cam clay model. During undrained loading condition, the settlement values increase by 22% when slip elements are used. The surface settlement increases by about three times when the load is doubled and the surface settlement at all points increases when using slip elements due to the mode of motion which allows smooth movement of the adjacent soil with respect to the pile. The vertical displacement increases as the distance decreases from the pile and negligible values are obtained beyond 10D (where D is the pile diameter) from the center of the pile and these values are slightly increased when slip elements are used. The vertical effective stress along a section at a distance D from the pile center is approximately the same for all load increments and lower values of effective vertical stress can be obtained when slip elements are used.展开更多
Carbon nanotube(CNT)/polymer nanocomposites have vast application in industry because of their light mass and high strength. In this work, a cylindrical tube which is made up of functionally graded(FG) PmP V/CNT nanoc...Carbon nanotube(CNT)/polymer nanocomposites have vast application in industry because of their light mass and high strength. In this work, a cylindrical tube which is made up of functionally graded(FG) PmP V/CNT nanocomposite, is optimally designed for the purpose of torque transmission. The main confining parameters of a rotating shaft in torque transmission process are mass of the shaft, critical speed of rotation and critical buckling torque. It is required to solve a multi-objective optimization problem(MOP) to consider these three targets simultaneously in the process of design. The three-objective optimization problem for this case is defined and solved using a hybrid method of FEM and modified non-dominated sorting genetic algorithm(NSGA-II), by coupling two softwares, MATLAB and ABAQUS. Optimization process provides a set of non-dominated optimal design vectors. Then, two methods, nearest to ideal point(NIP) and technique for ordering preferences by similarity to ideal solution(TOPSIS), are employed to choose trade-off optimum design vectors. Optimum parameters that are obtained from this work are compared with the results of previous studies for similar cylindrical tubes made from composite or a hybrid of aluminum and composite that more than 20% improvement is observed in all of the objective functions.展开更多
基金Project(RG086/10AET) supported by the Institute of Research Management and Monitoring (IPPP),University of Malaya (UM) under UMRG grant number,Malaysia
文摘The effective stress method is developed to predict the axial capacity of piles in clay. The effective stress state changes due to the resulting pore pressure change and therefore, the strength and stiffness of the soil will change. In this work, the finite element method is utilized as a tool for the analysis of pile-soil systems in undrained condition. The computer program CRISP was developed to suit the problem requirements. CRISP uses the finite element technique and allows predictions to be made of ground deformation using critical state theories. Eight-node isoparametric element was added to the program in addition to the slip element. A pile loading problem was solved in which the pile-soil system is analyzed in undrained condition. The pile is modelled as elastic-plastic material, while the soil is assumed to follow the modified Cam clay model. During undrained loading condition, the settlement values increase by 22% when slip elements are used. The surface settlement increases by about three times when the load is doubled and the surface settlement at all points increases when using slip elements due to the mode of motion which allows smooth movement of the adjacent soil with respect to the pile. The vertical displacement increases as the distance decreases from the pile and negligible values are obtained beyond 10D (where D is the pile diameter) from the center of the pile and these values are slightly increased when slip elements are used. The vertical effective stress along a section at a distance D from the pile center is approximately the same for all load increments and lower values of effective vertical stress can be obtained when slip elements are used.
文摘Carbon nanotube(CNT)/polymer nanocomposites have vast application in industry because of their light mass and high strength. In this work, a cylindrical tube which is made up of functionally graded(FG) PmP V/CNT nanocomposite, is optimally designed for the purpose of torque transmission. The main confining parameters of a rotating shaft in torque transmission process are mass of the shaft, critical speed of rotation and critical buckling torque. It is required to solve a multi-objective optimization problem(MOP) to consider these three targets simultaneously in the process of design. The three-objective optimization problem for this case is defined and solved using a hybrid method of FEM and modified non-dominated sorting genetic algorithm(NSGA-II), by coupling two softwares, MATLAB and ABAQUS. Optimization process provides a set of non-dominated optimal design vectors. Then, two methods, nearest to ideal point(NIP) and technique for ordering preferences by similarity to ideal solution(TOPSIS), are employed to choose trade-off optimum design vectors. Optimum parameters that are obtained from this work are compared with the results of previous studies for similar cylindrical tubes made from composite or a hybrid of aluminum and composite that more than 20% improvement is observed in all of the objective functions.
