按合作制规范农村信用社应首先解决的几个问题

按合作制规范农村信用社应首先解决的几个问题□李鸿铎郑超群王彦朋《国务院关于农村金融体制改革的决定》（以下简称《决定》）明确提出了按合作制原则逐步规范农村信用社的股权设置、民主管理和服务方向。但由于历史的原因，长期以来，农村信用社民主管理弱化、股金存款...

An Analysis of the Structure of Carbide-tool Utilization Expert System

The necessity and feasibility of an expert system for carbide-tool utilization are analyzed and a practical system named CUES(carbide-tool utilization expert system ) is developed and realized. The system concept, module structure, data management, inference strategy and the interface design of the system are discussed in.detail. The system would be useful not only for the preparation of tool bank of FMS or CIMS, but the for the proper application of cemented carbide tools in conventional machining Processes.

Mathematical Definitions of Operators for Cartographic Generalization

This paper puts forword 11 cartographic generalization operator models and introduces their mathematical definitions,and thus a precise mathematical form and quantitative description has been given to these formerly limited qualitative concepts.The meaning of mathematical definition of operators for cartographic generalization and the application prospect in computer_aided cartography (CAC) is stated.ract The Jurassic strata in Jingyan of Sichuan containing the Mamenchinsaurus fauna are dealt with and divided in this paper. The Mamenchisaurus fossils contained there are compared in morphological features and stratigraphically with other types of the genus on by one. The comprehensive analysis show that the Mamenchisaurus fauna of Jingyan appeared in the early Late Jurassic and is primitive in morphology. The results of the morphological identification and stratigraphical study agree with each other. Their evolutionary processes in different apoches of the Late Jurassic also made clear. Key words Jingyan, Sichuan, Mamenchisaurus Fauna, stratigraphy, evolution

Cast-rolling force model in solid-liquid cast-rolling bonding(SLCRB) process for fabricating bimetal clad strips

Based on twin-roll casting, a cast-rolling force model was proposed to predict the rolling force in the bimetal solid-liquid cast-rolling bonding(SLCRB) process. The solid-liquid bonding zone was assumed to be below the kiss point(KP). The deformation resistance of the liquid zone was ignored. Then, the calculation model was derived. A 2D thermal-flow coupled simulation was established to provide a basis for the parameters in the model, and then the rolling forces of the Cu/Al clad strip at different rolling speeds were calculated. Meanwhile, through measurement experiments, the accuracy of the model was verified. The influence of the rolling speed, the substrate strip thickness, and the material on the rolling force was obtained. The results indicate that the rolling force decreases with the increase of the rolling speed and increases with the increase of the thickness and thermal conductivity of the substrate strip. The rolling force is closely related to the KP height. Therefore, the formulation of reasonable process parameters to control the KP height is of great significance to the stability of cast-rolling forming.

Design of hybrid damping controller based on multi-target gravitational search optimization algorithm in a multi-machine power system with high penetration of PV park

A mathematical approach was proposed to investigate the impact of high penetration of large-scale photovoltaic park(LPP) on small-signal stability of a power network and design of hybrid controller for these units.A systematic procedure was performed to obtain the complete model of a multi-machine power network including LPP.For damping of oscillations focusing on inter-area oscillatory modes,a hybrid controller for LPP was proposed.The performance of the suggested controller was tested using a 16-machine 5-area network.The results indicate that the proposed hybrid controller for LPP provides sufficient damping to the low-frequency modes of power system for a wide range of operating conditions.The method presented in this work effectively indentifies the impact of increased PV penetration and its controller on dynamic performance of multi-machine power network containing LPP.Simulation results demonstrate that the model presented can be used in designing of essential controllers for LPP.

Fuzzy gain-scheduling output feedback controller design for saturated linear plants

In this paper, the control design problem for linear systems subject to actuator saturations is considered. A fuzzy gain-scheduling output feedback controller is proposed to guarantee the stability of the closed-loop system as well as providing disturbance/error attenuation measured in L2 norm. The synthesis condition is cast as a convex optimization problem in terms of linear matrix inequalities (LMIs) and can be solved efficiently. The ball-beam system is used to demonstrate the proposed saturation control approach.

Design and control of a middle-vessel batch distillation for separating DMC–EMC–DEC mixture

In this paper, the mixture of dimethyl carbonate, ethyl methyl carbonate and diethyl carbonate was separated by middle-vessel batch distillation with feeding in middle-vessel and process control characteristics were researched. The steady state simulation results in Aspen Plus were exported to Aspen Dynamics. Then control effect of liquid level control with HighSelector, composition control(structure1, structure2) and temperature control(proportional action, proportional integration action) were proposed. Composition control structure 2 and temperature control with PI action were investigated to achieve a good control effect.

DESIGN AND FABRICATION OF Si/SiGe PMOSFETs

Based on theoretical analysis and computer-aided simulation, optimized design principles for Si/SiGe PMOSFET are given in this paper, which include choice of gate materials,determination of germanium percentage and profile in SiGe channel, optimization of thickness of dioxide and silicon cap layer, and adjustment of threshold voltage. In the light of these principles,a SiGe PMOSFET is designed and fabricated successfully. Measurement indicates that the SiGe PMOSFET's (L=2μm) transconductance is 45 mS/mm (300K) and 92mS/mm (77K), while that is 33 mS/mm (300K) and 39mS/mm (77K) in Si PMOSFET with the same structure.

Bearing Behaviors of Stiffened Deep Cement Mixed Pile

A series of investigations were conducted to study the bearing capacity and load transfer mechanism of stiffened deep cement mixed （SDCM） pile. Laboratory tests including six specimens were conducted to investigate the frictional resistance between the concrete core and the cementsoil. Two model piles and twenty-four full-scale piles were tested to examine the bearing behavior of single pile. Laboratory and model tests results indicate that the cohesive strength is large enough to ensure the interaction between core pile and the outer cement-soil. The full-scale test results show that the SDCM piles exhibit similar bearing behavior to bored and cast-in-place concrete piles. In general, with the rational composite structure the SDCM piles can transmit the applied load effectively, and due to the addition of the stiffer core, the SDCM piles possess high bearing capacity. Based on the findings of these experimental investigations and theoretical analysi , a practical design method is developed to predict the vertical bearing capacity of SDCM pile.

Microstructures and mechanical properties of Ti−Al−V−Nb alloys with cluster formula manufactured by laser additive manufacturing

Ti−Al−V−Nb alloys with the cluster formula,12[Al−Ti_(12)](AlTi_(2))+5[Al−Ti1_(4)](V,Nb)2Ti,were designed by replacing V with Nb based on the Ti−6Al−4V alloy.Single-track cladding layers and bulk samples of the alloys with Nb contents ranging from 0 to 6.96 wt.%were prepared by laser additive manufacturing to examine their formability,microstructure,and mechanical properties.For single-track cladding layers,the addition of Nb increased the surface roughness slightly and decreased the molten pool height to improve its spreadability.The alloy,Ti−5.96Al−1.94V−3.54Nb(wt.%),exhibited better geometrical accuracy than the other alloys because its molten pool height was consistent with the spread layer thickness of the powder.The microstructures of the bulk samples contained similar columnar β-phase grains,regardless of Nb content.These grains grew epitaxially from the Ti substrate along the deposition direction,with basket-weaveα-phase laths within the columnar grains.Theα-phase size increased with increasing Nb contents,but its uniformity decreased.Along the deposition direction,the Vickers hardness increased from the substrate to the surface.The Ti−5.96Al−1.94V−3.54Nb alloy exhibited the highest Vickers hardness regardless of deposition position because of the optimal matching relationship between theα-phase size and its content among the designed alloys.

MAHIS-based analysis and design of financial investment planning system

In financial investment planning,a large number of components that interact in varying and complexways are involved.This leads to complex behavior that is difficult to understand,predict and manage.Asingle intelligent technique can not solve the complicated and elaborate investment planning problems.Itis necessary to study those problems synthetically by combining the multiple intelligent techniques.Weemployed fussy algorithms,genetic algorithms,etc.to solve complicated financial portfolio managementin this paper.We analyse and design an agent-based hybrid intelligent system by following the methodolo-gy for constructing agent-based hybrid intelligent system(MAHIS).The system starts with the financialrisk tolerance evaluation based on fussy algorithms.Asset allocation,portfolio selections,interest predic-tions,and ordered weighted averaging can be conducted by using hybrid intelligent techniques.The plan-ning agent in the system can easily access all the intelligent processing agents,including the agents of fi-nancial risk tolerance assessment,asset allocation,portfolio selection,interest prediction,and decisionaggregation.Overall system robustness is facilitated.

Optimization of Molten Salt Cleaning Process for Surface Roughness of Remanufactured 27SiMn Hydraulic Support Column

During molten salt cleaning of remanufactured 27SiMn hydraulic support column,oxidation occurs on the surface of metal substrate.This results in a change of the surface roughness of metal substrate after cleaning,which affects subsequent remanufacturing process.To decrease the effect is very important.This paper analyzed the oxidation mechanism of molten salt cleaning,explored the oxidation reaction that occurred during cleaning,and determined the key process parameters of cleaning that affecting oxidation reaction.By using central composite experimental design method and taking surface roughness variation of 27SiMn steel samples before and after molten salt cleaning as response variable to optimize the key process parameters,the optimal parameters of molten salt for cleaning remanufactured 27SiMn hydraulic support column could be obtained.The results show that the oxidation reaction of cleaning paint dirt can protect metal substrate from oxidation to a certain extent,and cleaning temperature and placement depth of metal substrate have a direct impact on the degree of oxidation reaction.When the cleaning temperature is 300℃and the distance between paint dirt and free surface of molten salt is 0.5 times the height of the parts,the surface roughness variation is minimal.Therefore,the cleaning quality will be improved under such parameters.

Introduction and evaluation of a novel hybrid brattice for improved dust control in underground mining faces: A computational study

A proper control and management of dust dispersion is essential to ensure safe and productive underground working environment. Brattice installation to direct the flow from main shaft to the mining face was found to be the most effective method to disperse dust particle away from the mining face. However,it limits the movement and disturbs the flexibility of the mining fleets and operators at the tunnel. This study proposes a hybrid brattice system- a combination of a physical brattice together with suitable and flexible directed and located air curtains- to mitigate dust dispersion from the mining face and reduce dust concentration to a safe level for the working operators. A validated three-dimensional computational fluid dynamic model utilizing Eulerian–Lagrangian approach is employed to track the dispersion of dust particle. Several possible hybrid brattice scenarios are evaluated with the objective to improve dust management in underground mine. The results suggest that implementation of hybrid brattice is beneficial for the mining operation: up to three times lower dust concentration is achieved as compared to that of the physical brattice without air curtain.

A study on the design of a hybrid policy for carbon abatement

A necessary way to mitigate global warming is carbon reduction, which the international community is now actively promoting. China has committed a target goal for carbon reduction to the international society, and has devoted a great effort toward researching the impact of related policies. Carbon taxation and carbon trading are the two main mechanisms to advocate carbon abatement, which many countries have been using. Each of these two mechanisms possesses advantages and disadvantages, and an appropriate combination of them can make best use of their advantages while bypassing their disadvantages, creating a superior mechanism. In our opinion, the main differences between these two mechanisms are that carbon taxation has a lower institution cost(consisting of the related infrastructural investment and the regulation cost,etc), and is easier to operate, but lacks the flexibility in response to variations of market conditions. However, this flexibility is just the origin of risk, which increases the difficulty for firms in their decision of carbon abatement and is an indirect way to incentivize carbon abatement, compared to carbon trading, which has a more direct effect in carbon reduction. Based on the above observation, we present a hybrid mechanism of carbon abatement, which is an organized combination of carbon taxation and carbon trading. It consists of two parts: first, the carbon taxation, which has a progressive tax rate, second, the carbon trading. Small firms will only pay the carbon tax, while large firms, will first need to get the initial carbon emission quotas by some way, and then trade it in the carbon market if necessary. For firms with extra emissions,they will receive a punishment according to a high carbon tax rate. This hybrid policy considers the equity between different firms in carbon emission rights as well as the efficiency of the mechanism while decreasing the risk level for firms in the carbon emission decision, making it superior to the two previous policies. We also analyze the feasibility of this hybrid policy in China,address some important issues in the implementation of this hybrid policy in China and present the relevant suggestions. The discussion in this paper can serve as a reference to the government in the decision of carbon policies.

Programming a Parametric Design Algorithm to Improve Manufacturing Processes＇ Efficiency： The Case Study of Glued-Laminated Timber

In the last decade, parametric and generative design techniques become quite popular for form-finding strategies or for pushing automation in design processes. Nevertheless, these techniques could be applied in engineering processes as well in order to improve the effectiveness and the efficiency of manufacturing processes in BI （building industry）. Focusing on the case study of GLT （glued-laminated timber）, this paper shows the procedure of programming a parametric algorithm adopted by authors that pursues two specific design intents： reducing the usage of unneeded high-quality raw material and improving the efficiency of production processes by producing DF （digital fabrication） contents for standard production systems of GLT. According to different European and international standards, thanks to FEM （finite element model） simulations and curvature analysis, the algorithm allows saving at least 33% of high-quality raw material and, according to early first surveys on a standard production system, 30% of operation time among product engineering-processes.

Robust Consensus of Multi-Agent Systems with Uncertain Exogenous Disturbances

The objective of this paper is to investigate the consensus of the multi-agent systems w/th nonlinear coupling function and external disturbances. The disturbance includes two parts, one part is supposed to be generated by an exogenous system, which is not required to be neutrally stable as in the output regulation theory, the other part is the modeling uncertainty in the exogenous disturbance system. A novel composite disturbance observer based control （DOBC） and H∞ control scheme is presented so that the disturbance with the exogenous system can be estimated and compensated and the consensus of the multi-agent systems with fixed and switching graph can be reached by using Hoo control law. Simulations demonstrate the advantages of the proposed DOBC and H∞ control scheme.

Simulation-based Manufacturing System Modeling

In recent years, computer simulation appears to be very advantageous technique for researching the resource-constrained manufacturing system. This paper presents an object-oriented simulation modeling method, which combines the merits of traditional methods such as IDEF0 and Petri Net. In this paper, a four-layer-one-angel hierarchical modeling framework based on OOP is defined. And the modeling description of these layers is expounded, such as: hybrid production control modeling and human resource dispatch modeling. To validate the modeling method, a case study of an auto-product line in a motor manufacturing company has been carried out.

Energy efficient mechanism using flexible medium access control protocol for hybrid wireless sensor networks

Energy efficiency is a primary consideration in a wireless sensor network (WSN). This is also a major parameter when designing a medium access control (MAC) protocol for WSNs. Hierarchical clustering structure is regarded suitable for WSNs due to its good performance in energy conservation. In this work, an adequately flexible mechanism for clustering WSNs is designed, in which some creative or promotional metrics are utilized, such as cluster head selection algorithm, cluster optional reconstruction, interested data transmission, multiple path routing protocol. All these strategies were cooperated to maximize energy saving of whole system. An appropriate MAC protocol for this mechanism is proposed, by flexibly switching the status of diverse sensor nodes in different strategies. The simulation results show that the proposed MAC protocol is suitable for clustering WSNs and performs well in aspects of energy efficiency, flexibility and scalability.

Optimal Rate Allocation Based on Cross-Layer Design and End-to-End Congestion Control in WCDMA Networks

In this paper, a novel idea for rate allocation combining both vertical coupling and horizontal coupling constraints is proposed, and a unified utility function to balance two paradoxical issues: efficiency and fairness, revenue and cost is elaborated in WCDMA networks. Then, the optimal rate allocation problem is formulated as a network utility maximization(NUM) model based on cross-layer design and end-to-end congestion control, aiming at exploring the impacts of wired networks and the characteristics of radio access networks(RANs) on rate allocation. Furthermore, a distributed algorithm is derived, which can effectively match load states between RANs and wired networks, followed by a detailed illustration of the practical implementations. Numerical results demonstrate a signifi cant performance improvement in the end-to-end throughput.

Design and implementation of ethernet passive electronic network over coax

To increase the limit of ethernet over coax （EoC） technology in the bidirectional reform of the hybrid fiber coaxial （HFC） network, an ethernet passive electronic network （EPEN） system based on Coax is proposed and experimentally demonstrated in this paper. The proposed EPEN exploits the existing capabilities of the MAC layer in the ethernet passive optical network （EPON） for reduction of cost of the HFC network. As the MPCP （multi-point control protocol） is introduced in the EPEN, bandwidth control and higher efficiency can be achieved. The experimental results exhibit the throughput of system up to 100Mbps, which meet the requirements of HFC network. To improve the performance of EPEN, frequency division multiplexing （FDM） can be used for further increase of the throughput and more hardware processing modules in the future. can be implemented to enhance the capacity