In this paper, fouling mechanisms of mullite ceramic membranes for treatment of oily wastewaters in hybrid coagulation-microfiltration （MF） process presented. Hermia＇s models for cross flow filtration were used to ...In this paper, fouling mechanisms of mullite ceramic membranes for treatment of oily wastewaters in hybrid coagulation-microfiltration （MF） process presented. Hermia＇s models for cross flow filtration were used to investigate the fouling mechanisms of membranes with various coagulating chemicals concentrations. Four coagu lating chemicals （FeC12.4H20, FeSO4.7H20, A1C13-6H20 and A12（SO4）3.18H20） plus Ca（OH）2 of the same concen- tration were evaluated in the coagulation-MF hybrid process with different concentrations （0, 50 mg.L-1, 100 mg.L-1 and 200 mg.L-1）. To determine whether the data agree with models under consideration, the coefficients of determination （R2） of all models were compared with one another. In addition, average prediction errors of models were calculated. The results showed that cake filtration model can be applied for prediction of permeation flux decline for MF and coagulation-（MF） hybrid process with the best average error equal to 0.09%. Results indicated that pore blocking behavior changes as time of filtration increases, and one model cannot predict pore blocking behavior in all filtration time with very good precision.展开更多
Feather, as a by-product of the poultry industry, has long been treated as a solid waste, which causes environ- mental and economic problems. In this work, the hydrolyzed feather keratin （HFK） was extracted from the...Feather, as a by-product of the poultry industry, has long been treated as a solid waste, which causes environ- mental and economic problems. In this work, the hydrolyzed feather keratin （HFK） was extracted from the chicken feather using a cost-effective method of alkali-extraction and acid-precipitation by applying urea and sodium sulfide. The aim was development and characterization of the eco-friendly films based on the HFK with variable glycerol contents by a thermoplastic process. The thermal analysis showed that high temperature and high pres- sure improved the compatibility between the glycerol and the HFI（ molecules. Also it was shown that the addi- tion of water is necessary in the hot-pressing process of films, The FT-IR analysis indicated that the formation of the new hydrogen bonds between HFK and glycerol. By increasing the glycerol content, the film tensile strength （orb ） decreases from 10,5 MPa to 5.7 MPa and the solubility increases from 15.3% to 20.9%, while the elongation at break （εb） achieves the maximum value of 63,8% for the film with 35% glycerol. The swelling was just below 16.9% at 25 ℃ for 24 h, suggesting a good stability of the films in water. The water vapor permeability （WVP） varied between 3.02 x 10 ^10g. m 2. s-1 . pa-1 and 4.11 x 10-10g · m-2 · s-1 · Pa-1 for the films with 20%and 40% glycerol, respectively. The HFK film was uniform, translucent and tough, which could be used in packaging and agricultural field.展开更多
文摘In this paper, fouling mechanisms of mullite ceramic membranes for treatment of oily wastewaters in hybrid coagulation-microfiltration （MF） process presented. Hermia＇s models for cross flow filtration were used to investigate the fouling mechanisms of membranes with various coagulating chemicals concentrations. Four coagu lating chemicals （FeC12.4H20, FeSO4.7H20, A1C13-6H20 and A12（SO4）3.18H20） plus Ca（OH）2 of the same concen- tration were evaluated in the coagulation-MF hybrid process with different concentrations （0, 50 mg.L-1, 100 mg.L-1 and 200 mg.L-1）. To determine whether the data agree with models under consideration, the coefficients of determination （R2） of all models were compared with one another. In addition, average prediction errors of models were calculated. The results showed that cake filtration model can be applied for prediction of permeation flux decline for MF and coagulation-（MF） hybrid process with the best average error equal to 0.09%. Results indicated that pore blocking behavior changes as time of filtration increases, and one model cannot predict pore blocking behavior in all filtration time with very good precision.
基金Supported by the National Natural Science Foundation of China(21176269,31371880,31401526)Higher School Science and Technology Innovation Project of Guangdong Province(2013KJCX0102)Science and Technology Plan Project of Guangdong Province(2013B010403029)
文摘Feather, as a by-product of the poultry industry, has long been treated as a solid waste, which causes environ- mental and economic problems. In this work, the hydrolyzed feather keratin （HFK） was extracted from the chicken feather using a cost-effective method of alkali-extraction and acid-precipitation by applying urea and sodium sulfide. The aim was development and characterization of the eco-friendly films based on the HFK with variable glycerol contents by a thermoplastic process. The thermal analysis showed that high temperature and high pres- sure improved the compatibility between the glycerol and the HFI（ molecules. Also it was shown that the addi- tion of water is necessary in the hot-pressing process of films, The FT-IR analysis indicated that the formation of the new hydrogen bonds between HFK and glycerol. By increasing the glycerol content, the film tensile strength （orb ） decreases from 10,5 MPa to 5.7 MPa and the solubility increases from 15.3% to 20.9%, while the elongation at break （εb） achieves the maximum value of 63,8% for the film with 35% glycerol. The swelling was just below 16.9% at 25 ℃ for 24 h, suggesting a good stability of the films in water. The water vapor permeability （WVP） varied between 3.02 x 10 ^10g. m 2. s-1 . pa-1 and 4.11 x 10-10g · m-2 · s-1 · Pa-1 for the films with 20%and 40% glycerol, respectively. The HFK film was uniform, translucent and tough, which could be used in packaging and agricultural field.
